Effects of Processing Methods on Mechanical Properties of Alkali Treated Bagasse Fibre Reinforced Epoxy Composite
- 1 Department of Mechanical Engineering, University of Agriculture, Makurdi, Benue State, Nigeria
- 2 Department of Mechanical Engineering, University of Agriculture, Makurdi, Benue State, Nigeria
Abstract
Effects of the processing methods on the mechanical properties of treated bagasse fibre reinforced epoxy composite were evaluated. The composite materials were processed by employing hand lay-up and compression moulding methods and fibres were treated with NaOH solution. The composite samples were subjected to tensile, flexural and impact tests. Based on the findings, compression moulding method produced better mechanical properties compared to the composites manufactured by hand lay-up method. The results showed that the tensile strength and Young’s modulus of the samples produced by compression moulding method increased by 77 percent and 47 percent respectively (at optimal fibre loading) compared to those produced by the hand lay-up method. The results also showed noticeable improvements in the impact strength of the material produced by compression moulding method, with impact strength of 11.5 kJ/m 2 against the samples produced by hand lay-up method, with impact strength of 7 kJ/m 2 .
- Yousif, B.F., Wong, K.J. and El-Tayeb, N.S.M. (2007) An Investigated on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites. ASME International Mechanical Engineering Congress and Exposition, Washington DC.
- Ajith, G., Senthil Kumar, M. and Elayaperumal, A. (2014) Experimental Investigations on Mechanical Properties of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices. Procedia Engineering, 97, 2052-2063. https://doi.org/10.1016/j.proeng.2014.12.448
- Thakur, V.K. and Thakur, M.K. (2014) Processing and Characterization of Natural Cellulose/Thermo-Set Polymer Composites. Carbohydrate Polymers, 109, 102-117. https://doi.org/10.1016/j.carbpol.2014.03.039
- Salit, M.S. (2015) Manufacturing Process of Natural Fibre Reinforced Polymer Composites. Springer International Publishing, Switzerland.
- Mehar, S.K. (2009) Weathering Behaviour of Bagasse Fibre Reinforced Polymer Composite. Thesis, National Institute of Technology, Rourkela.
- Matoke G.M., Owido S.F. and Nyaanga D.M. (2012) Effects of Production Methods and Material Ratios on Physical and Mechanical Properties of the Composites. American International Journal of Contemporary Research, 2, 208.
- Ertan, R. (2016) The Effect of Fabrication Processes and Material Combinations on the Mechanical Properties of Fibre Reinforced Polymer Composites. Proceedings of the IRES International Conference, Barcelona, 19 June 2016, 1-4.
- Mohaiman, S.J., Salman, S.D., Leman, Z., Sultan, M.T.H., Ishak, M.R. and Azmah Hanim, M.A. (2016) Effects of Processing Method, Moisture Content and Resin System on Physical and Mechanical Properties of Woven Kenaf Plant Fibre Composites. BioResources, 11, 1466-1476.
- Clemons, C.M. and Ibach, R.E. (2004) Effects of Processing Methods and Moisture History on Laboratory Fungal Resistance of Wood HDPE Composite. Forest Products Journal, 54, 50.
- Yuhazri Y.M., Phongsakorn P.T. and Sihombing H. ,et al. (2010)A Comparison Process between Vacuum Infusion and Hand Lay-Up Method toward Kenaf/Polyester Composite International Journal of Basic & Applied Sciences 10, 63-66.
- Rashdi, A.A.A., Sapuan, S.M., Ahmad, M.M.H.M. and Khalina, A. (2010) Combined Effect of Water Absorption Due to Water Immersion, Soil Burial and Natural Weather on Mechanical Properties of Kenaf Fibre Unsaturated Polyester Composites (KFUPC). International Journal of Mechanical and Materials Engineering, 5, 11-17.