One of the most important useful and widely abundant industrial minerals in the world is the clay minerals. Their applications in various industries are dependent on their properties. In this study, the mineralogical and physico-chemical properties of RahinSho (RC), Major Porter (MP), Wereng camp (WC), Kwi (KC) and Naraguta (NC) clay deposits in Plateau State, Nigeria were investigated to evaluate their potentials for some industrial uses. The x-ray diffraction studies revealed the kaolins as the dominant clay minerals in all the samples. The non-clay minerals found were quartz and muscovite. The chemical analyses by x-ray fluorescence also indicated that the silica (SiO 2 ) values of the samples ranged from (41.20 - 62.26)% while the alumina (Al 2 O 3 ) range was (17.25 - 37.15)%. Some considerable amounts of impurities found were Fe 2 O 3 (0.43 - 27.52)%, TiO 2 (0.05 - 3.28)%, K 2 O (0.13 - 3.01)%. The oxides of Na, Ca and Mg were within acceptable limits in the clays for most purposes. The loss on ignition ranged from 4.30% - 12.43%. The physical properties investigated were particle size distribution that contained heavy clay-size materials ranging from 67.88% - 91.88%, plasticity index had range of values from 15.90% - 33.68%, and drying and firing shrinkages were 1.10% - 2.22% and 1.65% - 4.49% respectively. All the samples attained a temperature of 1500 ° C without fusion except Naraguta clay that fused at 1300 ° C. At the temperature of 1200 ° C, RC, MP and WC clays retained their natural colours of white and near-white respectively, while KC and NC clays changed colours from orange pink and light brown to moderate pink and moderate reddish brown respectively. These results compare very well with several clays elsewhere. Based on these characteristics, the clays were observed to be potentially suitable for the production of paints, tiles, ceramics, refractories, sanitary wares and clay bricks. Minimal processing will increase the potential of RC and MP to meet up with specification for paper, fertilizer and/or pharmaceutical uses.
KeywordsClayDepositCharacterizationIndustries
Tony, C., Bruce, T. and Bob, B. (1999) Mineral Commodity Report 20-Clays. Institute of Geological and Nuclear Sciences.
US Geological Survey (USGS) (1999) Environmental Characteristics of Clays and Clay Mineral Deposits. Information Handout. http://minerals.er.usgs.gov/minerals/pubs/commodity/
Jock, A.A., Muhammad, A.A.Z., Abdulsalam, S., El-Nafaty, U.A. and Aroke, U.O. (2018) Surface Modification of Low-Cost Bentonite Adsorbents—A Review. Particulate Science and Technology.
Meseguar, S., Jordan, M.M., Pardo, F. and Sanfeliu, T. (2011) Geology and Application of Clays Used in Castellon Ceramic Cluster (NE, Spain). Journal of Geography and Geology, 3, 132-139.
Attah, L.E. (2010) Physico-Chemical Properties and Industrial Potential of Some Clay Deposits in Calabar Area, South Eastern Nigeria. Global Journal of Environmental Sciences. http://www.readperiodicals.com/201001/2307422941.html
Asamoah, R.B., Nyankson, E., Annan, E., Agyei-Tuffour, B., Efavi, J.K., Kan-Dapaah, K., Apalangya, V.A., Damoah, L.N.W., Dodoo-Arhin, D., Tiburu, E. K., Kwofie, S.K., Onwona-Agyeman, B. and Yaya, A. (2018) Industrial Applications of Clay Materials from Ghana (a Review). Oriental Journal of Chemistry, 34, 1719-1734. https://doi.org/10.13005/ojc/340403
Vieira, M.G.A., Almeida Neto, A.F., Gimenes, M.L. and Silva, M.G.C. (2010) Sorption Kinetics and Equilibrium for the Removal of Nickel Ions from Aqueous Phase on Calcined Bofe Bentonite Clay. Journal of Hazardous Materials, 177, 362-371. https://doi.org/10.1016/j.jhazmat.2009.12.040
Murray, H.H. (2007) Development in Clay Science 2. Applied Clay Mineralogy. Elsevier.
Emofurieta, W.O., Ogundirin, T.O. and Imeokpai, E.G. (1994) Mineralogical, Geochemical and Economic Appraisal of Some Clay and Shale Deposits of South Western and North Eastern Nigeria. Journal of Mining and Geology, 30, 157-159.
Irabor, P.S.A. (2002) Physical and Chemical Investigation on Some Nigerian Kaolinite Clays For Use in the Ceramics and Allied Industries. Nigerian Journal of Engineering Research and Development, 1, 54-59.
Odo, J.U. and Nwajagu, C.O. (2003) Possible Application of Eha-Alumona Clay Deposit in the Production of Refractories and Ceramic Ware. Proceedings of the Nigerian Materials Congress and Meeting of the Nigerian Materials Research Society at Conference Hall, Engineering Materials Development Institute, Akure, 12-14 November 2003, 109-111.
Akpokodje, E.G., Etu-Efeofor, J.O. and Olorunfemi, B.N. (1991) The Composition and Physical Properties of Some Ceramic and Pottery Clays of Southern-Eastern Nig. Journal of Mining and Geology, 27, 1-8.
Attah, L.E., Oden, M.I. and Ibok, U.J. (2001) Brick Forming Properties of Odukpani clay Deposits from Physical, Mechanical and Mineralogical Studies. West Africa J. Res. Develop. Educ., 8, 93-98.
Attah, L.E. (2008) The Composition and Physical Properties of Some Clay of Cross Rivers State, Nigeria. African Research Review, 2, 84-93. https://doi.org/10.4314/afrrev.v2i1.41026
Omowunmi, O.J. (2000) Characterisation of Some Nigerian Clay as Refractory Materials for Furnace Lining. Nigerian Journal of Engineering Management, 2, 1-4.
Raw Materials Research and Development Council (2001) Multi-Disciplinary Task Force Report of Techno-Economic Survey on Non-Metallic Mineral Products Sector.
National Metallurgical Development Centre (2008) Data Bank of Raw Materials for the Metallurgical Industry. AB Enterprises Ltd., Kaduna.
Osabor, N.V., Okafor, C.P. and Ayi, A.A. (2009) Characterization of Odukpani, South Eastern Nigeria. African Journal of Pure and Applied Chemistry, 3, 79-85.
Joint Committee on Powder Diffractogram Standard (1980) Mineral Powder Diffraction File. Centre for Diffraction, Data, Parklane.
Okafor, C.P., Osabor, N.V. and Ayi, A.A. (2009) Characterization of Odukpani, South Eastern Nigeria. African Journal of Pure and Applied Chemistry, 3, 79-85.
Jock, A.A., Ayeni, F.A., Jongs, L.S. and Kangpe, N.S. (2013) Development of Refractory Bricks from Nigerian Nafuta Clay Deposit. International Journal of Materials, Methods and Technologies, 1, 189-195.
American Society for Testing and Materials (2010) 10 Standard Tests Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils. https://kashanu.ac.ir/Files/D%204318%20-%2000%20%20_RDQZMTG_.pdf
American Society for Testing and Materials (1990) Linear Shrinkage and Coefficient of Thermal Expansion of Chemical Resistance Mortars Grouts. http://www.roadauthority.com/Standards/?id=dc3c58bc-a8f9-4b16-b3bc-df8acb6d6c6a
Hassan, S.B. (2005) Modern Refractories-Production, Properties, Testing and Applications. Timo Press, Zaria.
Edwin, N.G. (1980) Geological Society of American Rock-Color Chart Committee Book. Boulder.
Emofurieta, W.O. (1988) A Comparative Study of Two Kaolin Deposits in Southwestern Nigeria. Journal of Mining and Geology, 24, 15-20.
National Fertilizer Company of Nigeria (1985) Tender Document for the Supply of Kaolin from Nigeria Source.
Grimshaw, R.H. (1980) The Chemistry and Physics of Clays. 4th Edition, John Willey and Sons, New York.
Santisteban, J.I., Mediavilla, R., Silvino, C. and Martinez, P.E. (2004) Loss on Ignition: A Qualitative or Quantitative Methods for Organic Matter and Carbonate Mineral Content in Sediments. Journal of Paleolimnology, 32, 287-299. https://doi.org/10.1023/B:JOPL.0000042999.30131.5b
Lujan, M.J. and Ary, T.S. (2014) Crystalline Silica Primer. https://minerals.usgs.gov/minerals/pubs/commodity/silica/780292.pdf
Jock, A.A., Ayeni, F.A., Ahmed, A.S. and Sullayman, U.A. (2013) Evaluation of the Refractory Properties of Nigerian Ozanagogo Clay Deposit. Journal of Minerals and Materials Characterization and Engineering, 1, 321-325. https://doi.org/10.4236/jmmce.2013.16048
Ouahabi, E.M., Daoudi, L., Vleeschouwer, D.F., Bindler, R. and Fagel, N. (2014) Potentially of Clay Raw Materials from Northern Morocco in Ceramic Industry: Tetouan and Meknes Areas. Journal of Minerals and Materials Characterization and Engineering, 2, 1-20. https://doi.org/10.4236/jmmce.2014.23019
Maslennikova, G.N., Khalilullova, R.A. and Platov, Y.T. (1999) Identification of Iron Compounds in Clay-Containing Materials. Springer, 56, 48-51. https://doi.org/10.1007/BF02681406
Mermut, A.R. and Cano, A.F. (2001) Base-Line Studies of the Clay Minerals Soc. Source Clays: Chemical Analysis of Major Elements. Clay and Clay Minerals, 49, 381-386.
Grim, E.R. and Kodama, H. (2013) Clay Minerals. http://www.britannica.com/EBchecked/topic/120723/clay-mineral
Syvitski, J.P.N. (2007) Principles, Methods and Application of Particle Size Analysis. Cambridge University Press, Cambridge. http://www.cambridge.org/9780521364720
Talabi, O.A., Ademilua, L.O. and Akinola, O.O. (2012) Compositional Features and Industrial Application of Ikere Kaolinite, South Western Nigeria. Research Journal in Engineering and Applied Sciences, 1, 327-333.
Guggenheim, S. and Martin, R.T. (1995) Definition of Clay and Clay Minerals. Journals Report of the AIPEA/CMS Nomenclature Committees, 43, 255-256.
Bain, J.A. (1971) Clay Minerals: A Plasticity Chart as an Aid to the Identification and Assessment of Industrial Clays. Inst. of Geo. Sciences, 64-78.
Kogel, J.E. (2006) Industrial Minerals and Rocks: Commodities, Markets and Uses. https://books.google.com.ng/books?hl=en&lr=&id=zNicdkuulE4C&oi=fnd&pg=PR9&dq=Kogel,+ J.E.+2006)+Industrial+Minerals+and+Rocks:+Commodities,+Markets+and+Uses.&ots=Nkr9AZF 9x7&sig=Ct4tmVcM7pIhm-K35XmqbycTM94&redir_esc=y#v=onepage&q=Kogel%2C%20 J.E.%20(2006)%20Industrial%20Minerals%20and%20Rocks%3A%20 Commodities%2C%20Marke ts%20and%20Uses.&f=false
Ayari, F., Srasra, E. and Trabelsi, A.N. (2007) Effect of Exchangeable Cations on the Physico-Chemical Properties of Smectites. Surface Engineering and Applied Electrochemistry, 43, 369-378. https://doi.org/10.3103/S1068375507050110
Daspan, R.I., Yakubu, J.A. and Taiwo, A.O. (2009) A Preliminary Chemical and Physical Assessment of the Kuba Kaolin Deposit, Jos Plateau (North-Central Nigeria). Continental Journal of Earth Sciences, 4, 1-11.
Johari, I., Said, S., Hisham, B., Bakar, A. and Ahmad, Z.A. (2010) Effect of the Change of Firing Temperature on Microstructure and Physical Properties of Clay Bricks from Beruas (Malaysia). Science of Sintering, 42, 245-254. https://doi.org/10.2298/SOS1002245J