Localized residual strain develops within the metallurgical texture of 1018 carbon steel from metallurgical processes, such as fabrication, annealing, and shaping. This residual strain results in accelerated localized pitting due to the formation of anodic sites at these locations. Once initiated, micron-sized corrosion pits can coalesce to form sites of potential catastrophic failure. In this contribution, we focus on the localized biocorrosion which initiates and grows in areas of localized strain such as the interfaces between manganese sulfide (MnS) inclusions and ferrite grains in the steel, at grain boundaries between ferrite grains with different crystallographic orientations and at pearlite grains (intergrown cementite (Fe 3 C) and ferrite), which are readily found in 1018 carbon steel. Here we hypothesize and show experimentally that accelerated biocorrosion in 1018 carbon steel finds its roots in the electrochemical potential difference (micro galvanic cells) generated between the unstrained ferrite iron ( α - Fe ) and the lattice defects, dislocations and mismatches found at interfaces formed between α - Fe and secondary phases i.e. MnS inclusions, cementite lamellar structures and grain boundaries distributed throughout the 3D network of the carbon steel. This hypothesis is supported by results from multiple micro- and nanoscale imaging and analytical methods obtained from field emission scanning electron microscopy, energy dispersive spectroscopy, electron backscattered diffraction and Auger nanoprobe electron spectroscopy. The morphology and composition of grains in the steel coupons were characterized before and after exposure to suboxic and sulfidogenic environments dominated by aerobic and anaerobic marine organisms. Corrosion processes are demonstrated to initiate in localized areas of high residual strain.
Costs, C. (2002) Preventive Strategies in the United States, Publication No. FHWA-RD-01-156, as Found in Supplement to Materials Performance.
Jackson, J.E. (2016) Cost of Corrosion Annually in the US Over $1.1 Trillion in 2016.
Avci, R., et al. (2013) Mechanism of MnS-Mediated Pit Initiation and Propagation in Carbon Steel in an Anaerobic Sulfidogenic Media. Corrosion Science, 76, 267-274. https://doi.org/10.1016/j.corsci.2013.06.049
Avci, R., et al. (2015) A Practical Method for Determining Pit Depths Using X-Ray Attenuation in EDX Spectra. Corrosion Science, 93, 9-18. https://doi.org/10.1016/j.corsci.2014.12.018
Martin, J.D. (2014) Biocorrosion of 1018 Steel in Sulfide Rich Marine Environments; a Correlation between Strain and Corrosion Using Electron Backscatter Diffraction. In: Chemical Engineering, Montana State University, 175.
Murr, L.E. (2015) A Brief History of Metals. Handbook of Materials Structures, Properties, Processing and Performance, 3-9.
Kirk-Othmer (2004) Steel. In: Encyclopedia of Chemical Technology, V. 00, John Wiley & Sons, New York. https://onlinelibrary.wiley.com/doi/pdf/10.1002/0471238961.1920050516012420.a01.pub2
Brandt, D.A. and Warner, J.C. (2009) Metallurgy Fundamentals, Goodheart-Willcox.
Lehmann, J. and Nadif, M. (2011) Interactions between Metal and Slag Melts: Steel Desulfurization. Reviews in Mineralogy and Geochemistry, 73, 493-511. https://doi.org/10.2138/rmg.2011.73.15
Porter, D.A. and Easterling, K.E. (1992) Phase Transformation in Metals and Alloys. CRC Press. https://doi.org/10.1007/978-1-4899-3051-4
Davis, B.H. (2013) Anaerobic Pitting Corrosion of Carbon Steel in Marine Sulfidogenic Environments. In: Physics, Montana State University, Bozeman.
Krauss, G. (2003) Solidification, Segregation, and Banding in Carbon and Alloy Steels. Metallurgical and Materials Transactions B, 34, 781-792. https://doi.org/10.1007/s11663-003-0084-z
Behrens, H. and Webster, J.D. (2011) Studies of Sulfur in Melts-Motivations and Overview. Reviews in Mineralogy and Geochemistry, 73, 1-8. https://doi.org/10.2138/rmg.2011.73.1
Choudhary, S. and Ghosh, A. (2008) Thermodynamic Evaluation of Formation of Oxide-Sulfide Duplex Inclusions in Steel. ISIJ International, 48, 1552-1559. https://doi.org/10.2355/isijinternational.48.1552
Cementite
Grain Boundary
Choudhary, S.K. (2012) Thermodynamic Evaluation of Inclusion Formation during Cooling and Solidification of Low Carbon Si-Mn Killed Steel. Materials and Manufacturing Processes, 27, 925-929. https://doi.org/10.1080/10426914.2011.602797
Ito, Y., Masumitsu, N. and Matsubara, K. (1981) Formation of Manganese Sulfide in Steel. Transactions of the Iron and Steel Institute of Japan, 21, 477-484. https://doi.org/10.2355/isijinternational1966.21.477
Kimura, S., et al. (2002) In-Situ Observation of the Precipitation of Manganese Sulfide in Low-Carbon Magnesium-Killed Steel. Metallurgical and Materials Transactions A, 33, 427-436. https://doi.org/10.1007/s11661-002-0103-8
Yu, H., et al. (2006) Morphology and Precipitation Kinetics of MnS in Low-Carbon Steel during Thin Slab Continuous Casting Process. Journal of Iron and Steel Research, International, 13, 30-36. https://doi.org/10.1016/S1006-706X(06)60091-5
Sun, W., Militzer, M. and Jonas, J. (1992) Strain-Induced Nucleation of MnS in Electrical Steels. Metallurgical Transactions A, 23, 821-830. https://doi.org/10.1007/BF02675559
Liu, Z., et al. (2006) Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel. ISIJ International, 46, 744-753. https://doi.org/10.2355/isijinternational.46.744
Oikawa, K., et al. (1995) The Control of the Morphology of MnS Inclusions in Steel during Solidification. ISIJ International, 35, 402-408. https://doi.org/10.2355/isijinternational.35.402
Rieders, N., et al. (2018) New Insights into the Role of MnS Inclusions in the Localized Corrosion of 1018 Carbon Steel.
Baker, M. and Castle, J. (1993) The Initiation of Pitting Corrosion at MnS Inclusions. Corrosion Science, 34, 667-682. https://doi.org/10.1016/0010-938X(93)90279-P
Spitzig, W. (1983) Effect of Sulfides and Sulfide Morphology on Anisotropy of Tensile Ductility and Toughness of Hot-Rolled C-Mn Steels. Metallurgical Transactions A, 14, 471-484. https://doi.org/10.1007/BF02644224
Spitzig, W. (1983) Effect of Sulfide Inclusion Morphology and Pearlite Banding on Anisotropy of Mechanical Properties in Normalized C-Mn Steels. Metallurgical Transactions A, 14, 271-283. https://doi.org/10.1007/BF02651624
Spitzig, W. and Sober, R. (1981) Influence of Sulfide Inclusions and Pearlite Content on the Mechanical Properties of Hot-Rolled Carbon Steels. Metallurgical Transactions A, 12, 281-291. https://doi.org/10.1007/BF02655201
Gainer, L. and Wallwork, G. (1979) The Effect of Nonmetallic Inclusions on the Pitting of Mild Steel. Corrosion, 35, 435-443. https://doi.org/10.5006/0010-9312-35.10.435
Cyril, N., Fatemi, A. and Cryderman, B. (2008) Effects of Sulfur Level and Anisotropy of Sulfide Inclusions on Tensile, Impact, and Fatigue Properties of SAE 4140 Steel. SAE Technical Paper.
Luu, W. and Wu, J. (1995) Effects of Sulfide Inclusion on Hydrogen Transport in Steels. Materials Letters, 24, 175-179. https://doi.org/10.1016/0167-577X(95)00068-2
Ju, C., Don, J. and Rigsbee, J. (1986) A High Voltage Electron Microscopy Study of Hydrogen-Induced Damage in a Low Alloy, Medium Carbon Steel. Materials Science and Engineering, 77, 115-123. https://doi.org/10.1016/0025-5416(86)90359-9
Ju, C. and Rigsbee, J. (1985) The Role of Microstructure for Hydrogen-Induced Blistering and Stepwise Cracking in a Plain Medium Carbon Steel. Materials Science and Engineering, 74, 47-53. https://doi.org/10.1016/0025-5416(85)90109-0
Ju, C. and Rigsbee, J. (1988) Interfacial Coherency and Hydrogen Damage in Plain Carbon Steel. Materials Science and Engineering: A, 102, 281-288. https://doi.org/10.1016/0025-5416(88)90583-6
Sephton, M. and Pistorius, P. (2000) Localized Corrosion of Carbon Steel Weldments. Corrosion, 56, 1272-1279. https://doi.org/10.5006/1.3280516
Reformatskaya, I., et al. (2004) The Effect of Nonmetal Inclusions and Microstructure on Local Corrosion of Carbon and Low-Alloyed Steels. Protection of Metals, 40, 447-452. https://doi.org/10.1023/B:PROM.0000043062.19272.c5
Wranglen, G. (1974) Pitting and Sulphide Inclusions in Steel. Corrosion Science, 14, 331-349. https://doi.org/10.1016/S0010-938X(74)80047-8
Adhikari, A., et al. (2008) Electrochemical Behavior and Anticorrosion Properties of Modified Polyaniline Dispersed in Polyvinylacetate Coating on Carbon Steel. Electrochimica Acta, 53, 4239-4247. https://doi.org/10.1016/j.electacta.2007.12.069
Chen, C., et al. (2017) Insight into the Anti-Corrosion Performance of Electrodeposited Silane/Nano-CeO 2 Film on Carbon Steel. Surface and Coatings Technology, 326, 183-191. https://doi.org/10.1016/j.surfcoat.2017.06.031
Park, J.H. and Park, J.M. (2014) Electrophoretic Deposition of Graphene Oxide on Mild Carbon Steel for Anti-Corrosion Application. Surface and Coatings Technology, 254, 167-174. https://doi.org/10.1016/j.surfcoat.2014.06.007
Quezada-Rentería, J.A., Cházaro-Ruiz, L.F. and Rangel-Mendez, J.R. (2017) Synthesis of Reduced Graphene Oxide (rGO) Films onto Carbon Steel by Cathodic Electrophoretic Deposition: Anticorrosive Coating. Carbon, 122, 266-275. https://doi.org/10.1016/j.carbon.2017.06.074
Santana, I., et al. (2015) Corrosion Protection of Carbon Steel by Silica-Based Hybrid Coatings Containing Cerium Salts: Effect of Silica Nanoparticle Content. Surface and Coatings Technology, 265, 106-116. https://doi.org/10.1016/j.surfcoat.2015.01.050
Suresh, S., et al. (2018) Evaluation of Corrosion Resistance of Nano Nickel Ferrite and Magnetite Double Layer Coatings on Carbon Steel. Thin Solid Films, 645, 77-86. https://doi.org/10.1016/j.tsf.2017.10.032
Ye, X., et al. (2015) Protecting Carbon Steel from Corrosion by Laser in Situ Grown Graphene Films. Carbon, 94, 326-334. https://doi.org/10.1016/j.carbon.2015.06.080
Zavareh, M.A., et al. (2014) Plasma Thermal Spray of Ceramic Oxide Coating on Carbon Steel with Enhanced Wear and Corrosion Resistance for Oil and Gas Applications. Ceramics International, 40, 14267-14277. https://doi.org/10.1016/j.ceramint.2014.06.017
Prasai, D., et al. (2012) Graphene: Corrosion-Inhibiting Coating. ACS Nano, 6, 1102-1108. https://doi.org/10.1021/nn203507y
Krishnamurthy, A., et al. (2015) Superiority of Graphene over Polymer Coatings for Prevention of Microbially Induced Corrosion. Scientific Reports, 5, Article No. 13858. https://doi.org/10.1038/srep13858
Widdel, F. and Bak, F. (1992) The Prokaryotes: A Handbook on the Biology of Bacteria: Ecophysiology, Isolation, Identification, and Applications. Springer-Verlag, New York.
Lizama, S.A.W.Y. (2015) Clarke’s Solution Cleaning Used for Corrosion Product Removal: Effects on Carbon Steel Substrate, in Corrosion and Prevention 2015. Australasian Corrosion Association, Adelaide.
ASTM (2017) Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, in G1. West Conshohocken.
Kamaya, M. (2009) Measurement of Local Plastic Strain Distribution of Stainless Steel by Electron Backscatter Diffraction. Materials Characterization, 60, 125-132. https://doi.org/10.1016/j.matchar.2008.07.010
Hwang, B., et al. (2005) Analysis and Prevention of Side Cracking Phenomenon Occurring during Hot Rolling of Thick Low-Carbon Steel Plates. Materials Science and Engineering: A, 402, 177-187. https://doi.org/10.1016/j.msea.2005.04.045
Gutman, E.M. (1998) Mechanochemistry of Materials. Cambridge International Science Publishing, Cambridge.