Effect of Waveform Parameters on Pulsed Glow Discharge in Air
- 1 Jiangsu Electric Power Research Institute, Nanjing, China
- 2 Jiangsu Electric Power Research Institute, Nanjing, China
- 3 Jiangsu Electric Power Research Institute, Nanjing, China
- 4 School of Electrical Engineering, Xi’an Jiaotong University, Xi’an, China
Abstract
The nanosecond single pulse was employed here to generate a large volume glow discharge between the wire-plane electrodes in air. In order to find requirements on pulse waveform for generation of a large volume discharge at atmospheric pressure, the effect of pulse risetime, pulse width, and amplitude on glow discharge has been widely investigated in this paper. Results reveal that a large volume glow discharge can be generated in an inhomogeneous electric field under the single pulse with the faster risetime, the lower peak amplitude. The pulse width has almost no influence on the density of glow discharge, but which has a great influence on the transition from glow discharge to streamer discharge. A model of inter-shielding-effect has been proposed to explain the influence of waveform parameters on pulsed glow discharge.
- W. Samaranayake, Y. Miyahara, T. Namihira, et al., “Ozone Generation in Dry Air Using Pulsed Discharges with and without a Solid Dielectric Layer,” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 8, No. 4, 2001, pp. 687-697. doi:10.1109/94.946724
- R. Ono and T. Oda, “Ozone Production Process in Pulsed Positive Dielectric Barrier Discharge,” Journal of Physics D: Applied Physics, Vol. 40, No. 1, 2007, pp. 176-182. doi:10.1088/0022-3727/40/1/011
- M. Simek and M. Clupek, “Efficiency of Ozone Production by Pulsed Positive Corona Discharge in Synthetic Air,” Journal of Physics D: Applied Physics, Vol. 35, No. 11, 2002, pp. 1171-1175. doi:10.1088/0022-3727/35/11/311
- Y. Yankelevich and A. Pokryvailo, “High-Power Short-Pulsed Corona: Investigation of Electrical Performance, SO2 Removal, and Ozone Generation,” IEEE Transactions on Plasma Science, Vol. 30, No. 5, 2002, pp. 1975-1981. doi:10.1109/TPS.2002.805320
- F. Fresnet, G. Baravian, L. Magne, et al., “Influence of Water on NO Removal by Pulsed Discharge in N 2 /H 2 O/ NO Mixtures,” Plasma Source Science and Technology, Vol. 11, No. 2, 2002, pp. 152-160. doi:10.1088/0963-0252/11/2/305
- T. Namihira, S. Tsukamoto, D. Wang, et al., “Influence of Gas Flow Rate and Reactor Length on NO Removal Using Pulsed Power,” IEEE Transactions on Plasma Science, Vol. 29, No. 4, 2001, pp. 592-598. doi:10.1109/27.940952
- T. Yuji and Y. Sung, “Surface Treatment of TiO 2 Films by Pulse Plasma for Dye-Sensitized Solar Cells Application,” IEEE Transactions on Plasma Science, Vol. 35, No. 4, 2007, pp. 1010-1013. doi:10.1109/TPS.2007.896918
- N. Takeuchi, K. Yasuoka and S. Ishii, “Surface Modification of Thin Rods by Theta-Pinching Metallic Plasmas,” IEEE Transactions on Plasma Science, Vol. 34, No. 4, 2006, pp. 1112-1115. doi:10.1109/TPS.2006.876484
- W. D. Yang, P. N. Wang, F. M. Li and K. W. Cheah, “Synthesis of Oxygen-Free Nanosized InN by Pulse Discharge,” Nanotechnology, Vol. 13, No. 1, 2002, pp. 65-68. doi:10.1088/0957-4484/13/1/315
- H. Yang, W. Nam and D. Park, “Production of Nanosized Carbon Black from Hydrocarbon by a Thermal Plasma,” Journal of Nanoscience and Nanotechnology, Vol. 7, No. 11, 2007, pp. 3744-3749. doi:10.1166/jnn.2007.003
- R. Ono and T. Oda. “Dynamics of Ozone and OH Radicals Generated by Pulsed Corona Discharge in Humid-Air Flow Reactor Measured by Laser Spectroscopy,” Journal of Applied Physics, Vol. 93, No. 10, 2003, pp. 5876-5882. doi:10.1063/1.1567796