Physicomechanical Properties of Sustainable Wood Plastic Composites of Tropical Sawdust and Thermoplastic Waste for Possible Utilization in the Wood Industry — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Physicomechanical Properties of Sustainable Wood Plastic Composites of Tropical Sawdust and Thermoplastic Waste for Possible Utilization in the Wood Industry
Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
,
Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
,
Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
,
Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
,
Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
,
Department of Pure and Industrial Chemistry, Chukwuemeka Odumegwu Ojukwu University, Uli, Nigeria
1 Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
2 Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
3 Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
4 Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
5 Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
6 Department of Pure and Industrial Chemistry, Chukwuemeka Odumegwu Ojukwu University, Uli, Nigeria
This work investigated and quantified the physicomechanical properties of flat - pressed wood plastic composites produced with recycled polyethylene terephthalate, recycled polyethylene and sawdust derived from selected tropical timbers, namely, Nauclea diderrichii , Brachystegia eurycoma , Erythrophleum suaveolens and Prosopis africana , for possible utilization in the wood industry. The compounding of the polymer blends of the precursor plastics, namely recycled PET (rPET) and recycled PE (rPE) with the sawdust (SD) from the selected timbers to produce the desired wood rPET/rPE composites was carried out via the flat press method. The characterization of the physicomechanical properties of the wood plastic composites (WPCs) produced, such as t he density, hardness, flexural strength, ultimate tensile strength, elongation %, thickness swelling and water absorption capacity was carried out using methods based mainly on the European Committee for Standardization (CEN) and the American Society for Testing Materials (ASTM) standards. The results of the investigation on the resultant composites indicated that changes in the SD content affected the density of flat - pressed WPCs in line with literature. Generally, it was observed that as wood dust increased and PET content decreased, the density of composites decreased with some deviations as expected probably due to the anisotropic nature of the wood fillers. The analysis of variance (ANOVA) revealed that there was a statistically significant variation in the wood composites of Nuclea diderichii based on the physicomechanical values as the p-value (0.020) obtained was less than the critical level of α = 0.05. It was also observed that the composite, Wood 1 Sample 5 (W 1 S 5 ) which was composed of 40% rPE, 40% rPET and 20% SD (derived from Nuclea diderichii ), had the highest percentage elongation (26.84%); the highest flexural strength (14.995 N/mm 2 ) and possibly the least carbon footprint in the environment. These properties of W 1 S 5 suggest that it could therefore be the best option for the production of building materials like ceiling boards or floor skirting in the wood plastic composite industry. The results of these investigations have therefore indicated that the fabrication of WPCs from sawdust and rPET/rPE was technically feasible and had prospects for large scale production in the wood industry.
Rowell, R.M. (2013) Sustainability of Wood and Other Biomass. In: Rowell, R.M., Ed., Handbook of Wood Chemistry and Wood Composites, 2nd Edition, CRC Press, Boca Raton, 659-667.
Allaf, R.M., Albarahmieh, E. and Futian, M. (2020) Preparation of Sawdust Recycled-PET Composites via Solid-State Compounding. Processes, 8, Article No. 100. https://doi.org/10.3390/pr8010100
Maitlo, G., Ali, I., Maitlo, H.A., Ali, S., Unar, I.N., Ahmad, M.B., Bhutto, D.K., Karmani, R.K., Naich, S.U.R., Sajjad, R.U., Sikandar, A. and Muhammad, N.A. (2022) Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment. Sustainability, 14, Article No. 11637. https://doi.org/10.3390/su141811637
Rahman, K.S., Islam, M.N., Hannan, M.O., Dungani, R. and Abdul Khalil, H.P.S. (2013) Flat Pressed Wood Plastic Composites from Sawdust and Recycled Polyethylene Terephthalate (PET): Physical and Mechanical Properties. SpringerPlus, 2, Article No. 629. https://doi.org/10.1186/2193-1801-2-629
Sarda, P., Hanan, J.C., Lawrence, J.G. and Allahkarami, M. (2020) Sustainability Performance of Polyethylene Terephthalate, Clarifying Challenges and Opportunities. Journal of Polymer Science, 60, 7-31. https://doi.org/10.1002/pol.20210495
Khanam, P.N. and Almaadeed, M.A. (2015) Processing and Characterization of Polyethylene-Based Composites. Advanced Manufacturing Polymer & Composite Science, 1, 63-79. https://doi.org/10.1179/2055035915Y.0000000002
Jassim, A.K. (2017) Recycling of Polyethylene Waste to Produce Plastic Cement. Procedia Manufacturing, 8, 635-642. https://doi.org/10.1016/j.promfg.2017.02.081
Chaharmahali, M., Tajvidi, M. and Najafi, S.K. (2008) Mechanical Properties of Wood Plastic Composite Panels Made from Waste Fiberboard and Particleboard. Polymer Composites, 29, 606-610. https://doi.org/10.1002/pc.20434
Obaidi, M.F. and Ajaj, I.A. (2015) Effects of Sawdust Wood on Physical Properties of Recycled Polyethylene Terephthalate (RPET). International Journal of Innovative Research in Science, 4, 18433-18441.
Okedere, O.B., Fakinle, B.S., Sonibare, J.A., Elehinafe, F.B. and Adesina, O.A. (2017) Particulate Matter Pollution from Open Burning of Sawdust in Southwestern Nigeria. Cogent Environmental Science, 3, Article ID: 1367112. https://doi.org/10.1080/23311843.2017.1367112
Shahani, S., Gao, Z., Qaisrani, M.A., Ahmed, N., Yaqoob, H., Khoshnaw, F. and Sher, F. (2021) Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste. Polymers, 13, Article No. 3670. https://doi.org/10.3390/polym13213670
Sustainability
Recycle
Waste
Durmaz, S. (2022) Effect of Wood Flour Content on the Properties of Flat Pressed Wood Plastic Composites. Wood Research, 67, 302-310. https://doi.org/10.37763/wr.1336-4561/67.2.302310
Sotelo-Montes, C., Weber, J.C., Garcia, R.A., Silva, D.A. and Muniz, G.I.B. (2013) Variation in Wood Color among Natural Populations of Five Tree and Shrub Species in the Sahelian and Sudanian Ecozones of Mali. Canadian Journal of Forest Research, 43, 517-527. https://doi.org/10.1139/cjfr-2012-0510
Martinez-Lopez, Y., Paes, J.B., Gonçalves, F.G., Martínez-Rodríguez, E. and Medeiros Neto, P.N. (2020) Physico-Mechanical Properties of Wood-Plastic Produced with Forest Species and Thermoplastic Materials. Floresta e Ambiente, 27, e20170736. https://doi.org/10.1590/2179-8087.073617
Anthonellis-John, J. (2023) How to Calculate Volume and Density. https://www.wikihow.com/Calculate-Volume-and-Density
Halla, M.S., Mohammed, A.A., Sarmad, I.I. and Saif, S.H. (2021) Recycling of Wood-Plastic Composite Prepared from Poly (ethylene terephthalate) and Wood Sawdust. Engineering and Technology Journal, 39, 1654-1662. https://doi.org/10.30684/etj.v39i11.2203
American Society for Testing Materials (ASTM) (1999) Standard Test Method for Rubber Property—Durometer Hardness. D2240. https://www.plantech.com/wp-content/uploads/2017/05/ASTM-D2240-Durometer-Hardness.pdf
American Society for Testing Materials (ASTM) (1999) Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. https://www.astm.org/d0790-17.html
American Society for Testing Materials (ASTM) (1999) Standard Test Methods for Evaluating Properties of Wood-Based Fiber and Particle Panel Materials Static Tests of Timbers. D 1037-93. ASTM, Philadelphia.
Yale School of the Environment (2021) Turning Wood into Plastic. ScienceDaily. https://www.sciencedaily.com/releases/2021/03/210325190243.htm
Evstatiev, M., Fakirov, S., Krasteva, B., Friedrich, K., Covas, J.A. and Cunha, A.M. (2002) Recycling of Poly (ethylene terephthalate) as Polymer-Polymer Composites. Polymer Engineering & Science, 42, 826-835. https://doi.org/10.1002/pen.10994
Avila, A.F. and Duarte, M.V. (2003) A Mechanical Analysis on Recycled PET/HDPE Composites. Polymer Degradation Stability, 80, 373-382. https://doi.org/10.1016/S0141-3910(03)00025-9
Poletto, M., Zattera, A.J. and Santana, M.C. (2012) Structural Differences between Wood Species: Evidence from Chemical Composition, FTIR Spectroscopy, and Thermogravimetric Analysis. Journal of Applied Polymer Science, 126, E336-E343. https://doi.org/10.1002/app.36991
American National Standards Institute (ANSI) (1999) American National Standard for Particleboard. ANSI/A208.1. Composite Panel Association, Gaithersburg. https://www.scribd.com/doc/286962476/ANSI-A208-1-1999-PB
Bociong, K., Szczesio, A., Krasowski, M. and Sokolowski, J. (2018) The Influence of Filler Amount on Selected Properties of New Experimental Resin Dental Composite. Open Chemistry, 16, 905-911. https://doi.org/10.1515/chem-2018-0090
Wang, F., Lu, M., Zhou, S., Lu, Z. and Ran, S. (2019) Effect of Fiber Surface Modification on the Interfacial Adhesion and Thermo-Mechanical Performance of Unidirectional Epoxy-Based Composites Reinforced with Bamboo Fibers. Molecules (Basel, Switzerland), 24, Article No. 2682. https://doi.org/10.3390/molecules24152682
Mittal, A. (2023) What Is Shore Hardness Scale? The Complete Guide. https://plasticranger.com/what-is-shore-hardness-scale/
Zhou, Y., Fan, M. and Chen, L. (2016) Interface and Bonding Mechanisms of Plant Fibre Composites: An Overview. Composites Part B: Engineering, 101, 31-45. https://doi.org/10.1016/j.compositesb.2016.06.055
Bal, B. (2022) Mechanical Properties of Wood-Plastic Composites Produced with Recycled Polyethylene, Used Tetra Pak Boxes, and Wood Flour. BioResources, 17, 6569-6577. https://doi.org/10.15376/biores.17.4.6569-6577
Jakob, M., Mahendran, A.R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U. and Veigel, S. (2022) The Strength and Stiffness of Oriented Wood and Cellulose-Fibre Materials: A Review. Progress in Materials Science, 125, Article ID: 100916. https://doi.org/10.1016/j.pmatsci.2021.100916 https://www.sciencedirect.com/science/article/pii/S0079642521001407
Ayrilmis, N. and Jarusombuti, S. (2011) Flat-Pressed Wood Plastic Composite as an Alternative to Conventional Wood-Based Panels. Journal of Composite Materials, 45, 103-112. https://doi.org/10.1177/0021998310371546
Iqbal, M., Aminanda, Y., Firsa, T. and Ali, M. (2020) Bending Strength of Polyester Composites Reinforced with Stitched Random Orientation and Plain Weave Abaca Fiber. IOP Conference Series: Materials Science and Engineering, 739, Article ID: 012035. https://doi.org/10.1088/1757-899X/739/1/012035
Manaila, E., Stelescu, M.D., Craciun, G. and Ighigeanu, D. (2016) Wood Sawdust/Natural Rubber Ecocomposites Cross-Linked by Electron Beam Irradiation. Materials (Basel, Switzerland), 9, Article No. 503. https://doi.org/10.3390/ma9070503
Guan, R., Chen, H., Zhao, J., Jiang, S., Ke, Z. and Zha, S. (2012) Microcellular Foaming of Plasticized Thin PC Sheet: II. Mechanical Properties. Polymer-Plastics Technology and Engineering, 51, 526-532. https://doi.org/10.1080/03602559.2012.654576
Halligan, A.F. (1970) A Review of Thickness Swelling in Particleboard. Wood Science and Technology, 4, 301-312. https://doi.org/10.1007/BF00386406
Gupta, B.S., Reiniati, I. and Laborie, M.P.G. (2007) Surface Properties and Adhesion of Wood Fiber Reinforced Thermoplastic Composites. Colloids and Surfaces A, 302, 388-395. https://doi.org/10.1016/j.colsurfa.2007.03.002
Atoyebi, O.D., Adeolu, A.A. and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced from Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40, 1-8. https://doi.org/10.4028/www.scientific.net/JERA.40.1
Clemons, C. (2002) Wood-Plastic Composites in the United States: The Interfacing of Two Industries. Forest Products Journal, 52, 10-18.
Adhikary, K.B., Pang, S. and Staiger, M.P. (2008) Dimensional Stability and Mechanical Behaviour of Wood-Plastic Composites Based on Recycled and Virgin High-Density Polyethylene (HDPE). Composites Part B Engineering Journal, 39, 807-815. https://doi.org/10.1016/j.compositesb.2007.10.005
Woldesenbet, E., Gupta, N. and Vinson, J.R. (2002) Determination of Moisture Effects on Impact Properties of Composite Materials. Journal of Materials Science, 37, 2693-2698. https://doi.org/10.1023/A:1015864932198
Nayak, R.K., Mahato, K.K. and Ray, B.C. (2016) Water Absorption Behavior, Mechanical and Thermal Properties of Nano TiO2 Enhanced Glass Fiber Reinforced Polymer Composites. Composites Part A: Applied Science and Manufacturing, 90, 736-747. https://doi.org/10.1016/j.compositesa.2016.09.003
Duruaku, J.I., Ajiwe, V.I.E., Okoye, N.H. and Arinze, R.U. (2016) An Evaluation of the Calorific Values of the Branches and Stems of 11 Tropical Trees. Journal of Sustainable Bioenergy Systems, 6, 44-54. https://doi.org/10.4236/jsbs.2016.62005
Duruaku, I.J., Okoye, P.A.C., Onwukeme, V.I., Okoye, N.H., Nwadiogbu, J.O. and Arinze, R.U. (2023) An Evaluation of the Physico-Chemical, Structural and Morphological Properties of Selected Tropical Wood Species for Possible Utilization in the Wood Industry. Journal of Sustainable Bioenergy System, 13, 131-148. https://doi.org/10.4236/jsbs.2023.134008