Conversion Synergies during Steam Co-Gasification of Ligno-Cellulosic Simulated Biomass with Coal
- 1 Graduate School of Engineering, Nagoya University, Nagoya, Japan
- 2 Graduate School of Engineering, Nagoya University, Nagoya, Japan
- 3 EcoTopia Science Institute, Nagoya University, Nagoya, Japan
- 4 EcoTopia Science Institute, Nagoya University, Nagoya, Japan
- 5 EcoTopia Science Institute, Nagoya University, Nagoya, Japan
Abstract
Lignin and cellulose chemicals were used as artificial biomass components to make-up a simulated biomass. Alkali and Alkaline Earth Metal (AAEM) as well as volatile matter contents in these chemicals were much different from each other. Co-gasification of coal with simulated biomass shows improved conversion characteristics in comparison to the average calculated from separate conversion of coal and simulated biomass. Two conversion synergetic peaks were observed whereby the first peak occurred around 400℃ while the second one occurred above 800℃. Although co-gasification of coal with lignin that has high AAEM content also shows two synergy peaks, the one at higher temperature is dominant. Co-gasification of coal with cellulose shows only a single synergy peak around 400℃ indicating that synergy at low temperature is related with interaction of volatiles. Investigation of morphology changes during gasification of lignin and coal, suggests that their low reactivity is associated with their solid shape maintained even at high temperature.
- J. F. Vélez, F. Chejne, C. F. Valdés, E. J. Emery and C. A. Londo?o, “Co-Gasification of Colombian Coal and Biomass in Fluidized Bed: An Experimental Study,” Fuel, Vol. 88, No. 3, 2009, pp. 424-430. doi:10.1016/j.fuel.2008.10.018
- T. Sonobe, N. Worasuwannarak and S. Pipatmanomai, “Synergies in Co-Pyrolysis of Thai Lignite and Corncob,” Fuel Processing Technology, Vol. 89, No. 12, 2008, pp. 1371-1378. doi:10.1016/j.fuproc.2008.06.006
- Q. Xu, S. Pang and T. Levi, “Reaction Kinetics and Producer Gas Compositions of Steam Gasification of Coal and Biomass Blend Chars, Part 1: Experimental Investigation,” Chemical Engineering Science, Vol. 66, No. 10, 2011, pp. 2141-2148. doi:10.1016/j.ces.2011.02.026
- C. Blasi, “Combustion and Gasification Rates of Lignocellulosic Chars,” Progress in Energy Combustion Science, Vol. 35, No. 2, 2009, pp. 121-140. doi:10.1016/j.pecs.2008.08.001
- W. Zhu, W. Song and W. Lin, “Catalytic Gasification of Char from Co-Pyrolysis of Coal and Biomass,” Fuel Processing Technology, Vol. 89, No. 9, 2008, pp. 890-896. doi:10.1016/j.fuproc.2008.03.001
- D. Lv, M. Xu, X. Liu, Z. Zhan, Z. Li and H. Yao, “Effect of Cellulose, Lignin, Alkali and Alkaline Earth Metallic Species on Biomass Pyrolysis and Gasification,” Fuel Processing Technology, Vol. 91, No. 8, 2009, pp. 903-909. doi:10.1016/j.fuproc.2009.09.014
- K. Mitsuoka, S. Hayashi, H. Amano, K. Kayahara, E. Sasaoaka and A. Uddin, “Gasification of Woody Biomass Char with CO2: The Catalytic Effects of K and Ca Species on Char Gasification Reactivity,” Fuel Processing Technology, Vol. 92, No. 1, 2011, pp. 26-31. doi:10.1016/j.fuproc.2010.08.015
- I. Suelves, M. J. La′zaro and R. Moliner, “Synergetic Effects in the Co-Pyrolysis of Coal and Petroleum Residues: Influences of Coal Mineral Matter and Petroleum Residue Mass Ratio,” Journal of Analytical and Applied Pyrolysis, Vol. 55, No. 1, 2000, pp. 29-41. doi:10.1016/S0165-2370(99)00072-8
- H. Haykiri-Acma and S. Yaman, “Interaction between Biomass and Different Rank Coals during Co-Pyrolysis,” Renewable Energy, Vol. 35, No. 1, 2010, pp. 288-292. doi:10.1016/j.renene.2009.08.001
- L. Salmén, “Micromechanical Understanding of the Cell-Wall Structure,” Comptes Rendus Biologies, Vol. 327 No. 9, 2004, pp. 873-880. doi.org/10.1016/j.crvi.2004.03.010
- A. Gani and I. Naruse, “Effect of Cellulose and Lignin Content on Pyrolysis and Combustion Characteristics for Several Types of Biomass,” Renewable Energy, Vol. 32, No. 4, 2007, pp. 649-661. doi:10.1016/j.renene.2006.02.017