Fluidized Bed Superheated Steam Dryer for Bagasse: Effects of Particle Size Distribution
- 1 Audubon Sugar Institute, Louisiana State University AgCenter, Saint Gabriel, USA
- 2 Amalgamated Research LLC, Boise, USA
- 3 Sugar Cane Growers Cooperative of Florida, Belle Glade, USA
Abstract
Fluidized bed superheated steam drying is one of the technologies successfully applied to drying pulp in the sugar beet industry. It has the technological advantages of energy efficiency and safety (inert environment) required for use in drying bagasse. A comparison of the particle size distribution of bagasse and beet pulp was evaluated in terms of fluidization. The size distribution of bagasse particles is from 2 to 10 times broader than the equivalent distribution of beet pulp particles. The mean particle size of the bagasse is 1/3 of the mean size of the beet pulp. Fluidization tests proved that bagasse fluidization is possible. It was found that beet pulp and bagasse particles clearly differ on shape and size distribution which in turn will affect the design of the ancillary equipment and the fluidization systems if sugarcane bagasse is to be dried using superheated steam technology.
- S. Pang and A. S. Mujumdar, “Drying of Woody Biomass for Bioenergy: Drying Technologies and Optimization for an Integrated Bioenergy Plant,” Drying Technology, Vol. 28, No. 5, 2010, pp. 690-701. http://dx.doi.org/10.1080/07373931003799236
- P. Rein, “Cane Sugar Engineering,” Bartens, Berlin, 2007.
- A. S. Mujumdar, “Handbook of Industrial Drying,” Boca Raton, CRC/Taylor & Francis, 2007.
- A. S. Jensen, “Steam Drying of Beet Pulp. Larger Units, No Air Pollution, and Large Reduction of CO2 Emission,” The XVth Symposium Organized by Association Andrew VanHook. Utilization of Sugars as Raw Materials for Chemical and Biotechnological Applications and Eco-Compatible Processing, Maison des Agriculteurs, Reims, 2008.
- A. S. Jensen, “The Innovative Separation of Water from Beet Pulp—Steam Drying. Development by Rebuilding Old Dryers,” 22nd General Assembly of the International Commission for Sugar Technology, Berlin, 18-21 May 2003, pp. 347-355.
- A. S. Jensen, “Steam Drying of Beet Pulp. Latest Development,” 33rd Biennial Meeting of the American Society of Sugar Beet Technologists, Palm Springs, 2-5 March 2005, pp. 118-125.
- A. S. Jensen, “Drying of Beet Pulp in Superheated Steam,” The 26th Biennial Meeting of the American Society of Sugar Beet Technologists, 1991.
- R. B. Keey, “Drying of Loose and Particulate Materials,” Hemisphere, New York, 1992.
- C. N. Anderson, “Aerodynamics of Bagasse Particles,” The Australian Society of Sugar Cane Technologists Limited (ASSCT), 1988.
- N. Ponce, P Friedman and D. Leal, “Geometric Properties and Density of Bagasse Particles,” International Sugar Journal, Vol. 85, No. 1018, 1983, pp. 291-295.
- S. A. Nebra and I. Macedo, “Bagasse Particles Shape and Size and Their Free-Settling Velocity,” International Sugar Journal, Vol. 90, No. 1077, 1988, pp. 168-170.
- H. W. Bernhardt, “Shape Factors of Bagasse Particles,” The Annual Congress—South African Sugar Technologists’ Association, University of Natal, Durban, 1993.
- M. G. Rasul, V. Rudolph and M. Carsky, “Physical Properties of Bagasse,” Fuel, Vol. 78, No. 8, 1999, pp. 905-910. http://dx.doi.org/10.1016/S0016-2361(99)00011-3
- G. A. R. Alarcón, C. G. Sanchez, E. O. Gomez, et al., “Caracterización del Bagazo de la Caña de Azúcar. Parte I: Características Físicas,” The 6. Encontro de Energia no Meio Rural, Campinas, 2006.