Bio-jet fuel produced from non-edible oilseeds can be an alternative to fossil fuels with the benefits of increasing national energy security, reducing environmental impact, and fostering rural economic growth. Efficient oil extraction from oilseeds is critical for economic production of bio-jet fuels. Oil extractions from camelina (sativa) and canola ( Brassica napus ) seeds were conducted using a cold press method. The effect of the frequency controlling the screw rotation speed on the oil recovery and quality was discussed. Characterization of the produced raw vegetable oils, such as heating value, elemental content and main chemical compositions, was carried out. The results showed that the oil recovery increased when the frequency decreased. The highest oil recoveries for camelina and canola seeds were 88.2% and 84.1% respectively, both at 15 Hz. The cold press frequency and processing temperature (97.2 ° C - 106.0 ° C) had a minor influence on the qualities and recovery of both camelina and canola oils. In addition, camelina and canola oils produced at 15 Hz underwent catalytic cracking to examine potential hydrocarbon fuels production. It was observed that some of oil physicochemical properties were improved after catalytic cracking. Although more study is needed for further improvement of oil recovery and qualities, cold press could be an efficient method for oil extraction from non-edible oilseeds. Additionally, the preliminary results of upgrading the oils produced show very promising for future bio-jet fuels production.
Miraculas, G.A., Bose, N. and Raj, R.E. (2014) Optimization of Process Parameters for Biodiesel Extraction from Tamanu Oil Using Design of Experiments. Journal of Renewable and Sustainable Energy, 6, Article ID: 033120. http://dx.doi.org/10.1063/1.4880216
Zhao, X., Wei, L. and Julson, J. (2014) First Stage of Bio-Jet Fuel Production: Non-Food Sunflower Oil Extraction Using Cold Press Method. AIMS Energy, 2, 193-209. http://dx.doi.org/10.3934/energy.2014.02.193
Macrae, I., Oelke, E.A., Hutchison, W.D. and Nelson, J.J. (2000) Crop Profile for Canola in Minnesota. Minnesota Pesticide Impact Assessment Program (PIAP). http://www.ipmcenters.org/cropprofiles/docs/mncanola.pdf
Ehrensing, D.T. and Guy, S.O. (2008) Camelina. Extension Service, Oregon State University, 1-7. http://extension.oregonstate.edu/gilliam/sites/default/files/Camelina_em8953-e.pdf
Maher, K.D. and Bressler, D.C. (2007) Pyrolysis of Triglyceride Materials for the Production of Renewable Fuels and Chemicals. Bioresource Technology, 98, 2351-2368. http://dx.doi.org/10.1016/j.biortech.2006.10.025
Atabani, A.E., Silitonga, A.S., Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., Badruddin, I.A. and Fayaz, H. (2013) Non-Edible Vegetable Oils: A Critical Evaluation of Oil Extraction, Fatty Acid Compositions, Biodiesel Production, Characteristics, Engine Performance and Emissions Production. Renewable and Sustainable Energy Reviews, 18, 211-245. http://dx.doi.org/10.1016/j.rser.2012.10.013
Cheng, J., Li, T., Huang, R., Zhou, J. and Cen, K. (2014) Optimizing Catalysis Conditions to Decrease Aromatic Hydrocarbons and Increase Alkanes for Improving Jet Biofuel quality. Bioresource Technology, 158, 378-382. http://dx.doi.org/10.1016/j.biortech.2014.02.112
Demirbas, A. (2003) Fuel Conversional Aspects of Palm Oil and Sunflower Oil. Energy Sources, 25, 457-466. http://dx.doi.org/10.1080/00908310390142451
Ma, Z., Wei, L., Qu, W., Julson, J., Zhu, Q. and Wang, X. (2013) The Effect of Support on the Catalytic Performance for Bio-Oil Upgrading. Advanced Materials Research, 608-609, 350-355. http://dx.doi.org/10.4028/www.scientific.net/AMR.608-609.350
Yetim, H., Sagdic, O. and Ozturk, I. (2008) Fatty Acid Compositions of Cold Press Oils of Seven Edible Plant Seeds Grown in Turkey. Chemistry of Natural Compounds, 44, 634-636. http://dx.doi.org/10.1007/s10600-008-9131-y
Mohanty, A.K., Tummala, P., Liu, W., Misra, M., Mulukutla, P.V. and Drzal, L.T. (2005) Injection-Molded Biocomposites from Soy Protein Based Bioplastic and Short Industrial Hemp Fiber. Journal of Polymers and Environment, 13, 279-285. http://dx.doi.org/10.1007/s10924-005-4762-6
Berot, S., Compoint, J.P., Larre, C., Malabat, C. and Gueguen, J. (2005) Large-Scale Purification of Rapeseed Proteins (Brassica napus L.). Journal of Chromatography B, 818, 35-42. http://dx.doi.org/10.1016/j.jchromb.2004.08.001
Demirbas, A.H. and Demirbas, I. (2007) Importance of Rural Bioenergy for Developing Countries. Energy Conversion and Management, 48, 2386-2398. http://dx.doi.org/10.1016/j.enconman.2007.03.005
Rombaut, N., Savoire, R., Thomasset, B., Belliard, T., Castello, J., Hecke, E.V. and Lanoiselle, J. (2014) Grape Seed Oil Extraction: Interest of Supercritical Fluid Extraction and Gas-assisted Mechanical Extraction for Enhancing Polyphenol Co-Extraction in Oil. Comptes Rendus Chimie, 17, 284-292. http://dx.doi.org/10.1016/j.crci.2013.11.014
Biswas, S., Biswas P. and Kumar, A. (2012) Catalytic Cracking of Soybean Oil with Zirconium Complex Chemically Bonded to Alumina Support without Hydrogen. International Journal of Chemical Sciences and Applications, 3, 306-313.
Chin, H.F., Krishnapillay, B. and Stanwood, P.C. (1989) Seed Moisture: Recalcitrant vs. Orthodox Seeds. Seed Moisture, 14, 15-22.
Lam, P.S., Sokhansanj, S., Bi, X., Lim, C.J., Naimi, L.J., Hoque, M., Mani, S., Womac, A.R., Ye, X.P. and Narayan, S. (2008) Bulk Density of Wet and Dry Wheat Straw and Switchgrass Particles. Applied Engineering in Agriculture, 24, 351-358. http://dx.doi.org/10.13031/2013.24490
Chen, Y., Wang, C., Lu, W. and Yang, Z. (2010) Study of the Co-Deoxy-Liquefaction of Biomass and Vegetable Oil for Hydrocarbon Oil Production. Bioresource Technology, 101, 4600-4607. http://dx.doi.org/10.1016/j.biortech.2010.01.071
Rodenbush, C.M., Hsieh, F.H. and Viswanath, D.S. (1999) Density and Viscosity of Vegetable Oils. Journal of the American Oil Chemists’ Society, 76, 1415-1419. http://dx.doi.org/10.1007/s11746-999-0177-1
Jimenez, J.J., Bernal, J.L., del-Nozal, M.A., Martin, M.A. and Bernal, J. (2006) Sample Preparation Methods for Beeswax Characterization by Gas Chromatography with Flame Ionization Detection. Journal of Chromatography A, 1129, 262-272. http://dx.doi.org/10.1016/j.chroma.2006.06.098
Hamerton, I., Emsley, A.M., Hay, J.N., Herman, H., Howlin, B.J. and Jepson, P. (2006) The Development of Controllable Complex Curing Agents for Epoxy Resins Part 3. An Investigation of the Shelf Life and Thermal Dissociation Behavior of Bis(acetanilido)-tris(acetato)dicuprate(II). Journal of Materials Chemistry, 16, 255-265. http://dx.doi.org/10.1039/b510393b
Requena, J.F., Guimaraes, A.C., Alpera, S.Q., Gangas, E.R., Navarro, S.H., Gracia, L.M., Gil, J.M. and Cuesta, H.F. (2011) Life Cycle Assessment (LCA) of the Biofuel Production Process from Sunflower Oil, Rapeseed Oil and Soybean Oil. Fuel Processing Technology, 92, 190-199. http://dx.doi.org/10.1016/j.fuproc.2010.03.004
Peterson, J., Carlson, R., Richter, B. and Knowles, D. (2009) Extraction of Oil from Oilseeds Using Accelerated Solvent Extraction (ASE). LCGC.
Laaniste, P., Joudu, J. and Eremeev, V. (2004) Oil Content of Spring Oilseed Rape Seeds According to Fertilisation. Agronomy Research, 2, 83-86.
Bezergianni, S., Voutetakis, S. and Kalogianni, A. (2009) Catalytic Hydrocracking of Fresh and Used Cooking Oil. Industrial & Engineering Chemistry Research, 48, 8402-8406. http://dx.doi.org/10.1021/ie900445m
Santillan-Jimenez, E., Morgan, T., Lacny, J., Mohapantra, S. and Crocker, M. (2013) Catalytic Deoxygenation of Triglycerides and Fatty Acids to Hydrocarbons over Carbon-supported Nickel. Fuel, 103, 1010-1017. http://dx.doi.org/10.1016/j.fuel.2012.08.035
Rustan, A.C. and Drevon, C.A. (2005) Fatty Acids: Structures and Properties. Encyclopedia of Life Sciences, 1-7.
Yaliwal, V.S., Daboji, S.R., Banapurmath, N.R. and Tewari, P.G. (2010) Production and Utilization of Renewable Liquid Fuel in a Single Cylinder for Stroke Direct Injection Compression Ignition Engine. International Journal of Engineering Science and Technology, 2, 5938-5948.
Jet A/Jet A-1 (1999) Environment Canada, Emergencies Science and Technology Division (Bulletin, Data from Shell). http://www.etc-cte.ec.gc.ca/databases/Oilproperties/pdf/WEB_Jet_A-Jet_A-1.pdf
Qu, W., Wei, L. and Julson, J. (2013) An Exploration of Improving the Properties of Heavy Bio-Oil. Energy & Fuels, 27, 4717-4722. http://dx.doi.org/10.1021/ef400418p
Fadock, M.N. (2010) Carbon Profile Matching, Algae Fatty Acids and Jet A Fuel Properties. Guelph Engineering Journal, 3, 1-8.
Li, Y., Shao, J., Wang, X., Yang, H., Chen, Y., Deng, Y., Zhang, S. and Chen, H. (2013) Upgrading of Bio-Oil: Removal of the Fermentation Inhibitor (Furfural) from the Model Compounds of Bio-Oil Using Pyrolytic Char. Energy & Fuels, 27, 5975-5981. http://dx.doi.org/10.1021/ef401375q
Zhang, J., Toghiani, H., Mohan, D., Pittman Jr., C.U. and Toghiani, R.K. (2007) Product Analysis and Thermodynamic Simulations from the Pyrolysis of Several Biomass Feedstocks. Energy & Fuels, 21, 2373-2385. http://dx.doi.org/10.1021/ef0606557
Ofori-Boateng, C., KeatTeong, L. and JitKang, L. (2012) Comparative Exergy Analyses of Jatropha curcas Oil Extraction Methods: Solvent and Mechanical Extraction Processes. Energy Conversion and Management, 55, 164-171. http://dx.doi.org/10.1016/j.enconman.2011.11.005
Zhang, H., Cheng, Y., Vispute, T.P., Xiao, R. and Huber, G.W. (2011) Catalytic Conversion of Biomass-Derived Feedstocks into Olefins and Aromatics with ZSM-5: The Hydrogen to Carbon Effective Ratio. Energy & Environmental Science, 4, 2297-2307. http://dx.doi.org/10.1039/c1ee01230d