BIM Supporting the Development of Multitasks Related with the Structural Project
- 1 CERIS—Civil Engineering Research and Innovation for Sustainability, Lisbon, Portugal
- 2 Department of Civil Engineering, University of Lisbon, Lisbon, Portugal
- 3 Department of Civil Engineering, University of Lisbon, Lisbon, Portugal
- 4 Department of Civil Engineering, University of Lisbon, Lisbon, Portugal
Abstract
Building Information Modelling (BIM) is a methodology focused on the centralization and sharing of the project information among all professionals involved, supported on the generation and manipulation of a three-dimensional (3D) digital BIM model. This methodology allows a close collaboration between the architect and the structural engineer and an adequate manipulation of the structural BIM model database, on the definition of multitasks. The collaboration allowed between all disciplines, avoid the detection of conflicts and data omission after in the construction place. Two BIM structural design cases were developed, using Revit as the modelling system and Robot as the structural software. Concerning the structural project the interoperability capacity between the software is still a limitation that engineers must be warned of. In the present study, the benefits and limitations identified within the communication and integration of distinct disciplines and on the development of most frequent multitasks normally related with a structural project, were considered.
- Succar, B. (2008) Building Information Modelling Framework: A Research and Delivery Foundation for Industry Stakeholders. Automation in Construction, 18, 357-375. https://doi.org/10.1016/j.autcon.2008.10.003
- Sacks, R., Eastman, C.M., Lee, G. and Teicholz, P.M. (2018) BIM Handbook: A Guide to Building Information Modeling for Owners, Designers, Engineers, Contractors, and Facility Managers. 3rd Edition, Willey, Hoboken. https://doi.org/10.1002/9781119287568
- Sampaio, A.Z. (2017) BIM as a Computer-Aided Design Methodology in Civil Engineering. Journal of Software Engineering and Applications, 10, 194-210. https://doi.org/10.4236/jsea.2017.102012
- Sampaio, A.Z. (2021) Maturity of BIM Implementation in Construction Industry: Governmental Policies. International Journal of Engineering Trends and Technology, 69, 92-100. https://doi.org/10.14445/22315381/IJETT-V69I7P214
- Ren, R., Zhang, J. and Dib, H.N. (2018) BIM Interoperability for Structure Analysis. Proceedings of ASCE-Construction Research Congress 2018, ASCE Construction Research Congress, New Orleans, 470-479. https://ascelibrary.org/doi/abs/10.1061/9780784481264.046
- Shehzad, H.M.F., Ibrahim, R.B., Yusof, A.F. and Khaidzir, K.A.M. (2019) Building Information Modelling: Factors Affecting the Adoption in the AEC Industry. 2019 6th International Conference on Research and Innovation in Information Systems (ICRIIS), Johor Bahru, 2-3 December 2019, 1-6. https://doi.org/10.1109/ICRIIS48246.2019.9073581
- Shirowzhan, S., Sepasgozar, S.M.E., Edwards, D.J., Li, H. and Wang, C. (2020) BIM Compatibility and Its Differentiation with Interoperability Challenges as an Innovation Factor. Automation in Constructions, 112, Article ID: 103086. https://doi.org/10.1016/j.autcon.2020.103086
- Sequeira, P. (2022) Analysis of BIM Technology Capabilities in the Generation of 4D Models. Master’s Thesis, University of Lisbon, Lisbon.
- Sampaio, A.Z., Sequeira, P., Gomes, A.M. and Sanchez-Lite, A. (2023) BIM Methodology in Structural Design: A Practical Case of Collaboration, Coordination, and Integration. Buildings, 13, Article 31. https://doi.org/10.3390/buildings13010031
- Azevedo, G. (2022) Implementation of the BIM Methodology in the Project of Structures: Adaptation of Procedures and Information Management. Master’s Thesis, University of Lisbon, Lisbon.
- Gomes, A.M., Sampaio, A.Z., Azevedo, G. and Sanchez-Lite, A. (2023) BIM in Structural Project: Interoperability Analyses and Data Management. Applied Science, 12, Article 8814. https://doi.org/10.3390/app12178814