Feature Extraction and Diagnosis System Using Virtual Instrument Based on CI
- 1
- 2
- 3
Abstract
Through investigating intelligent diagnosis method of Computational Intelligence (CI) and studying its application in fault feature extraction, a gear fault detection and Virtual Instrument Diagnostic System is developed by using the two hybrid programming method which combines both advantages of VC++ and MATLAB. The interface is designed by VC++ and the calculation of test data, signal processing and graphical display are completed by MATLAB. The pro-gram converted from M-file to VC++ is completed by interface software, and a various multi-functional gear fault di-agnosis software system is successfully obtained. The software system, which has many functions including the intro-duction of gear vibration signals, signal processing, graphical display, fault detection and diagnosis, monitoring and so on, especially, the ability of diagnosing gear faults. The method has an important application in the field of mechanical fault diagnosis.
- R. P. Shao, H. Y. Liu, and Y. Q. Xu, “Fault detection and diagnosis of gear system based on higher order cu-mulants,” Chinese Journal of Mechanical Engineering, Vol. 44, No. 6, pp. 161–168, 2008.
- J. Rafiee, F. Arvani, A. Harifi, and M. H. Sadeghi, “In-telligent condition monitoring of a gearbox using artifi-cial neural network,” Mechanical Systems and Signal Processing, Vol. 21, No. 4, pp. 1746–1754, 2007.
- S. T. Wan and H. X. Tong, “Design of the fault diagno-sis system of generator rotor winding inter-turn short circuit based on virtual instrument,” The Eighth Interna-tional Conference on Electronic Measurement and In-struments, Vol. 3, pp. 576–580, 2007.
- S. J. Lv, M. H. Zhang, Y.F. Li, and X. J. Yu, “Design on the fault diagnostic system based on virtual instrument technique,” Second International Workshop on Knowl-edge Discovery and Data Mining, pp. 304–307, 2009.
- Y. F. Liu, D. Miao, Y. H. Peng, and F. Meng, “Remote fault diagnosis based on virtual instrument technology,” Proceedings of the 10th International Conference on Computer Supported Cooperative Work in Design, 2006.
- Z. H. Xu, X. B. Wu, and Y. Guo, “Fault testing and diagnosis system of armored vehicle based on informa-tion fusion technology,” The Eighth International Con-ference on Electronic Measurement and Instruments, Vol. 3, pp. 708–711, 2007.
- C. T. Wang and Robert X. Gao, “A virtual instrumenta-tion system for integrated bearing condition monitor-ing,” IEEE Transactions on Instrumentation and Meas-urement, Vol. 49, No. 2, pp. 325–332, April 2000.
- Y. F. Li, “Research on fault diagnosis of FPC based on virtual instrument and rough set theory,” Proceedings of the 6th World Congress on Intelligent Control and Automation, Dalian, China, pp. 3891–3895, June 21–23, 2006.
- Giovanni Betta, Andrea Bernieri, Domenico Capriglione, and Mario Molinara, “SVM-based approach for instru-ment fault accommodation in automotive systems,” IEEE International Conference on Virtual Environments, Human-Computer Interfaces and Measurement Systems (VECIMS), Giardini Naxos, Italy, pp. 145–150, July 18–20, 2005.
- M. H. Zhang, Y. Wang, S. Zhu, S. J. Chen, and J. Y. Bao, “Research on application of virtual instrument and grey theory in the fault diagnostic system,” Proceedings of 2007 IEEE International Conference on Grey Systems and Intelligent Services, Nanjing, China, pp. 1343–1346, November 18–20, 2007.
- Y. Z. Yu, S. Y. Yang, and J. Q. Yao, “VC++ and MAT-LAB mixed programming in DOAS air pollution moni-toring system,” Journal of Tianjin University Science and Technology, Vol. 36, pp. 548–552, 2003.