The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns; natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.
KeywordsArtificial Neural Networks (ANN)Control ChartsControl Charts PatternsStatistical Process Control (SPC)Natural PatternShift PatternTrend Pattern
R.-S. Guh, F. Zorriassatine, J. D. T. Tannock, and C. O’ Brien, “On-line control chart pattern detection and discrimination: A neural network approach,” Arti?cial Intelligence in Engineering, Vol. 13, pp. 413–425, 1999.
T. L. Lucy-Bouler, “Using autocorrelations, CUSUMs and runs rules for control chart pattern recognition: An expert system approach,” PhD dissertation, University of Alabama, Tuscaloosa, 1991.
C.-S. Cheng and N. F. Hubele, “Design of a knowledge- based expert system for statistical process control,” Computers and Industrial Engineering, Vol. 22, No. 4, pp. 501–517, 1992.
J. A. Swift and J. H. Mize, “Out-of-control pattern recognition and analysis for quality control charts using Lisp-based systems,” Computers and Industrial Engineer- ing, Vol. 28, No. 1, pp. 81–91, 1995.
E. L. Grant and R. S. Leavenworth, “Statistical quality control,” 7th Edition, McGraw-Hill, New York, 1996.
L. S. Nelson, “The Shewhart control chart: Tests for special causes,” Journal of Quality Technology, Vol. 16, pp. 237–239, 1984.
Western Electric, “Statistical quality control handbook,” AT&T, Princeton, 1956.
D. C. Montgomery, “Introduction to statistical quality control,” 3rd Edition, Wiley, New York, 1996.
A. E. Smith, “X-Bar and R control chart interpretation using neural computing,” International Journal of Production Research, Vol. 32, pp. 309–320, 1994.
Y. Guo and K. J. Dooley, “Identification of change structure in statistical process control,” International Journal of Production Research, Vol. 30, pp. 1655–1669, 1992.
G. A. Pugh, “Synthetic neural networks for process control,” Computers and Industrial Engineering, Vol. 17, pp. 24–26, 1989.
G. A. Pugh, “A comparison of neural networks to SPC charts,” Computers and Industrial Engineering, Vol. 21, pp. 253–255, 1991.
S. I. Chang and E. S. HO, “A two-stage neural network approach for process variance change detection and classification,” International Journal of Production Research, Vol. 37, No. 7, pp. 1581–1599, 1999.
S. I. Chang and E. S. Ho, “An integrated neural network approach for simultaneous monitoring of process mean and variance shifts a comparative study,” International Journal of Production Research, Vol. 37, pp. 1881–1901, 1999.
I. Dedeakayogullari and N. Burnak, “Determination of mean and/or variance shifts with artificial neural net- works,” International Journal of Production Research. Vol. 37, No. 10, pp. 2191–2200, 1999.
C.-S. Cheng and H.-P. Cheng, “Identifying the source of variance shifts in the multivariate process using neural networks and support vector machines,” Expert Systems with Applications, Vol. 35, No. 1–2, pp. 198–206, 2008.
L.-H. Chena and T.-Y. Wang, “Artificial neural networks to classify mean shifts from multivariate X2 chart signals,” Computers & Industrial Engineering, Vol. 47, pp. 195–205, 2004.
R.-S. Guh and Y.-C. Hsieh, “A neural network based model for abnormal pattern recognition of control charts,” Computers and Industrial Engineering, Vol. 36, pp. 97–108, 1999.
R.-S. Guh, “A hybrid learning-based model for on-line detection and analysis of control chart patterns,” Computers and Industrial Engineering, Vol. 49, pp. 35–62, 2005.
M. B. Perry, J. K. Spoerre, and T. Velasco, “Control chart pattern recognition using back propagation arti?cial neural networks,” International Journal of Production Research, Vol. 39, pp. 3399–3418, 2001.
K. Assaleh and Y. Al-assaf “Features extraction and analysis for classifying causable patterns in control charts,” Computers and Industrial Engineering, Vol. 49. pp. 168–181, 2005.
A. Hassan, M. S. N. Baksh, A. M. Shaharoun, and H. Jamaluddin, “Improved SPC chart pattern recognition using statistical features,” International Journal of Production Research, Vol. 41, No. 7, pp. 1587–1603, 2003.
A. Hassan, M. S. N. Baksh, A. M. Shaharoun, and H. Jamaluddin, “Feature selection for SPC chart pattern recognition using fractional factorial experimental design,” Intelligent Production Machines and System: 2nd I*IPROMS Virtual International Conference, In: D. T. Pham, E. E. Eldukhri, and A. J. Soroka Ed., Elsevier, pp. 442–447, 3–14 July 2006.
T. Zan, R.-Y. Fei, and M. Wang, “Research on abnormal pattern recognition for control chart based on neural network,” Beijing Gongye Daxue Xuebao, Journal of Beijing University of Technology, Vol. 32, No. 8, pp. 673–676, 2006.
Z. Chen, S. Lu, and S. Lam, “A hybrid system for SPC concurrent pattern recognition,” Advanced Engineering Informatics, Vol. 21, No. 3, pp. 303–310, 2007.
C.-S. Cheng, “A multi-layer neural network model for detecting changes in the process mean,” Computers and Industrial Engineering, Vol. 28, No. 1, pp. 51–61, 1995.
S. K. Gauri and S. Chakraborty, “Feature-based reco- gnition of control chart patterns,” Computers and Industrial Engineering, Vol. 51, pp. 726–742, 2006.
F. Zorriassatine and J. D. T. Tannock, “A review of neural networks for statistical process control,” Journal of Intelligent Manufacturing, Vol. 9, pp. 209–224, 1998.
S. Sagiroglu, E. Besdok, and M. Erler, “Control chart pattern recognition using artificial neural networks,” Turkish Journal of Electrical Engineering, Vol. 8, No. 2, pp. 137–147, 2000.
R.-S. Guh, “Optimizing feedforward neural networks for control chart pattern recognition through genetic algorithms,” International Journal of Pattern Recognition and Articial Intelligence, Vol. 18, No. 2, pp. 75–99.
H. Demuth, M. Beale, and M. Hagan “Neural network toolbox user’s guide,” Math Works, Natick, MA, 2009.
Y. Al-Assaf, “Recognition of control chart patterns using multi-resolution wavelets analysis and neural networks,” Computers and Industrial Engineering, Vol. 47, pp. 17–29, 2004.