Integrating ACAD with GIS for Civil Engineering Applications
- 1 Civil Engineering Department, College of Engineering, Nahrain University, Baghdad, Iraq
- 2 Civil Engineering Department, College of Engineering, Nahrain University, Baghdad, Iraq.
- 3 Civil Engineering Department, College of Engineering, Nahrain University, Baghdad, Iraq.
Abstract
GIS is a computerized database management system that provides geographic access (capture, storage, retrieval, analysis and display) to spatial data. Civil Engineering projects involve the management, analysis and integration of large amounts of geographic information to ensure success. This can include a wide range of information such as detailed design drawings originating from CAD solutions, detailed mapping, air photography, geological investigations, population information, traffic flows and environmental models. Although there are some similarities between CAD and GIS there are many differences. The most fundamental difference is that GIS mode is the world as it exists, whereas CAD models artifacts yet to be produced. As a result the data manipulated by a GIS is an order of magnitude larger and more complex than CAD systems have to deal with, and the nature of the data, its sources and its uses are quite different. In this paper, the selected area was Nahrain University. Many data were saved on the site map as a transparence layers built by using AutoCAD (2006). Then a digital library was built for the selected area and many data were saved on the site map as a themes built by using ArcView software.
- J. Dangennond and A. Schutzberg, “Basic of Geographic Information System,” Journal of Computing in Civil Engineering, Vol. 12, No. 7, 1998, pp. 121-122.
- www.GIS.htm, “Geographic Information System,” Copyright 2010, Holstead & Redmond Limited, 2010. http://www.gis.com/whatisgis/viewofgis/index.html/ http://www.gis.com/whatisgis/whyusegis.html http://www.gis.com/whatisgis/whatcanyoudowithgis.html http://www.gis.com/implementing_gis/index.html
- A. Ibraheem, “The Utilization of Local Resources to Develop a GIS in Surveying and Route Design,” M.Sc. Thesis, College of Engineering, University of Baghdad, Baghdad, 1997. http://www.scirp.org/journal/paperinformation.aspx?paperid=17099
- H. Tim, “CAD versus GIS Which Is Better for Automated Mapping,” University of Missouri, Columbia, 2001.
- T. Bernhardsen, “Geogrphic Information Systems,” 1st Edition, Wiley Inc., New York, 1999.
- A. Th Ibraheem and D. A. Falih, “Applying Geographic Information System (GIS) for Maintenance Strategy Selection,” Engineering Journal (ENG), Scientific Research Publication, Vol. 4, No. 1, 2012, pp. 44-54. http://www.scirp.org/journal/paperinformation.aspx?paperid=17099
- A. Th Ibraheem, “The Application of Geographical Information System in Civil Engineering,” Integration Teaching and Research with Community Service, College of Engineering, University of Sharjah, Sharjah, Book No. 87, 2008, pp. 436-455.
- Y. Alf, “An Introduction to AutoCAD 2006 2D and 3D Design,” British Library Cataloguing-in-Publication Data, 2006.