Kinematic Motion Analysis and Structural Analysis of Bellcrank Structures Using FEM
- 1 Department of Automotive engineering, Hoseo University, Asan-City, Korea
- 2 Department of Mechanical engineering, Hoseo University, Asan-City, Korea
Abstract
The results of kinematic motion analysis were used for the structural analysis based on data that the load applied to each part. The problem of the fatigue strength estimation of materials or components containing natural defects, inclusions or in homogeneities is of great importance f or both a scientifically or industrial point of view. Fatigue behavior in com ponents is often affected by the presence of residual stresses introduced by processes such as actuator system. Analysis can provide the estimation of the crack growth curves with sufficient accuracy, even in case of complicated bell crank structures which are crucial for preserving aileron integrity and which participate in transfer of load. Probability of crack detection or any other damage detection is a result of many factors. An endurance life prediction of bell crank is used finite element analyses. Endurance test data for slim test specimens were compared with the predicted fatigue life for verification.
- B. S. Kim et al., “A Numerical Analysis of the Dimensional Stability of the Plastic Composites Using a Thermoviscoelastic Composite Using a Thermoviscoelastic,” Journal of Composite Material, Vol. 36, No. 20, 2002, pp. 2389-2403. doi:10.1177/0021998302036020882
- B. S. Kim et al., “Dimensional Stability Analysis of Themoviscoelastic for EMI Shielding Using Melamine-Formaldehyde Composite Materials,” Int's Conference on Advances in Structural Engineering and Mechanics (ASEM02), 2002.
- T. K. Ahn and C. D. Mote Jr., “Monitoring and Preventing the Kick-off during Cutting,” California Cedar Product Co., 1996.
- M. K. Choi and E. K. Kim, “Ultra-Thinned Si Wafer Processing for Wafer Level 3D Packaging,” Journal of KWJS, Vol. 26, No. 1, 2008, pp. 12-16.
- S. A. Nasar, “Linear Electric Motors: Theory, Design, and Pratical Applications,” 2008, Prentice-Hall. Inc.
- P. C. Sen, “On Linear Synchronous Motor (LSM) for High Speed Propulsion,” IEEE Transaction on Magnetics, Vol. Mag-11, No. 5, 1975, pp. 1484-1486. doi:10.1109/TMAG.1975.1058873
- C. W. Jun, K.Y. Park and Q. S. Kang, “On the Static Test of Aileron Control System for a Basic Trainer,” KSAS journal, Vol. 28, No. 3, 2000, pp. 150-155.
- S. S. Kim, Y. J. Kang and K. I. Lee, “Experimental Verification of Flexible Multibody Dynamic Simulations for A Rotating Beam,” KSME International Journal, Vol. 26, No. 2, 2002, pp. 267-274.
- I. H. Moon and Y. K. Huang, “Evaluation of a Wafer Transportation Speed for Propulsion Nozzle Array on Air Levitation System,” Journal of Mechanical Science and Technology (KSME Int. J.), Vol. 20, No. 9, 2006, pp. 1492-1501.