This paper presents the application of recurrence plots (RPs) and recurrence quantification analysis (RQA) in the diagnostics of various faults in a gear-train system. For this study, multiple test gears with different health conditions (such as a healthy gear, and defective gears with a root crack on one tooth, multiple cracks on five teeth and missing tooth) are studied. The vibration data of a gear-train is measured by a triaxial accelerometer installed on the test. Two different support vector machine classifiers are trained and compared. Mutual information is used to rank the extracted features in order to select an optimal subset that provides as much information as possible about the intrinsic dynamics of the system. Results indicate that our approach is quite efficient in diagnosing the status of the health of the gear system and characterizing the dynamic behavior.
KeywordsGear DiagnosticsRecurrence AnalysisOptimizationTime Series Analysis
Bajric, R., Zuber, N. and Isic, S. (2013) Recent Advances in Vibration Signal Processing Techniques for Gear Fault Detection—A Review. Applied Mechanics and Materials, 430, 78-83. https://doi.org/10.4028/www.scientific.net/AMM.430.78
Hussain, S. and Gabbar, H. (2011) A Novel Method for Real Time Gear Fault Detection Based on Pulse Shape Analysis. Mechanical Systems and Signal Processing, 25, 1287-1298. https://doi.org/10.1016/j.ymssp.2010.11.013
Wang, W.Q., Ismail, F. and Farid Golnaraghi, M. (2001) Assessment of Gear Damage Monitoring Techniques Using Vibration Measurements. Mechanical Systems and Signal Processing, 15, 905-922. https://doi.org/10.1006/mssp.2001.1392
Dalpiaz, G., Rivola, A. and Rubini, R. (2000) Effectiveness and Sensitivity of Vibration Processing Techniques for Local Fault Detection in Gears. Mechanical Systems and Signal Processing, 14, 387-412. https://doi.org/10.1006/mssp.1999.1294
Randall, R.B. (1982) A New Method of Modelling Gear Faults. ASME Journal of Mechanical Design, 104, 259-267. https://doi.org/10.1115/1.3256334
Jardine, A.K.S., Lin, D. and Banjevic, D. (2006) A Review on Machinery Diagnostics and Prognostics Implementing Condition-Based Maintenance. Mechanical Systems and Signal Processing, 20, 1483-1510. https://doi.org/10.1016/j.ymssp.2005.09.012
Serridge, M. (1990) Ten Crucial Concepts behind Trustworthy Fault Detection in Machine Condition Monitoring. Springer, Berlin, 729-740. https://doi.org/10.1007/978-94-009-1914-3_42
Sankaravelu, A., Noah, S.T. and Burger, C.P. (1994) Bifurcation and Chaos in Ball Bearings. ASME Applied Mechanics Division Publications, 192, 313.
Mevel, B. and Guyader, J. (1993) Routes to Chaos in Ball Bearings. Journal of Sound and Vibration, 162, 471-487. https://doi.org/10.1006/jsvi.1993.1134
Kappaganthu, K. and Nataraj, C. (2011) Nonlinear Modeling and Analysis of a Rolling Element Bearing with a Clearance. Communications in Nonlinear Science and Numerical Simulation, 16, 4134-4145. https://doi.org/10.1016/j.cnsns.2011.02.001
Wang, W.J. and McFadden, P.D. (1996) Application of Wavelets to Gearbox Vibration Signals for Fault Detection. Journal of Sound Vibration, 192, 927-939. https://doi.org/10.1006/jsvi.1996.0226
Peng, Z. and Chu, F. (2004) Application of the Wavelet Transform in Machine Condition Monitoring and Fault Diagnostics: A Review with Bibliography. Mechanical Systems and Signal Processing, 18, 199-221. https://doi.org/10.1016/S0888-3270(03)00075-X
Combet, F. and Gelman, L. (2007) An Automated Methodology for Eprforming Time Synchronous Averaging of a Gearbox Signal without Speed Sensor. Mechanical Systems and Signal Processing, 21, 2590-2606. https://doi.org/10.1016/j.ymssp.2006.12.006
Yuan, J., He, Z. and Zi, Y. (2010) Gear Fault Detection Using Customized Multiwavelet Lifting Schemes. Mechanical Systems and Signal Processing, 24, 1509-1528. https://doi.org/10.1016/j.ymssp.2009.11.003
Mohammed, O.D., Rantatalo, M., Aidanp, J.-O. and Kumar, U. (2013) Vibration Signal Analysis for Gear Fault Diagnosis with Various Crack Progression Scenarios. Mechanical Systems and Signal Processing, 41, 176-195. https://doi.org/10.1016/j.ymssp.2009.11.003
Li, B., Zhang, X. and Wu, J. (2017) New Procedure for Gear Fault Detection and Diagnosis Using Instantaneous Angular Speed. Mechanical Systems and Signal Processing, 85, 415-428. https://doi.org/10.1016/j.ymssp.2016.08.036
Mohammed, O.D. and Rantatalo, M. (2016) Dynamic Response and Time-Frequency Analysis for Gear Tooth Crack Detection. Mechanical Systems and Signal Processing, 6667, 612-624. https://doi.org/10.1016/j.ymssp.2015.05.015
Hong, L., Qu, Y., Dhupia, J.S., Sheng, S., Tan, Y. and Zhou, Z. (2017) A Novel Vibration-Based Fault Diagnostic Algorithm for Gearboxes under Speed Uctuations without Rotational Speed Measurement. Mechanical Systems and Signal Processing, 94, 14-32. https://doi.org/10.1016/j.ymssp.2017.02.024
Salem, A.-A. (2012) Condition Monitoring of Gear Systems Using Vibration Analysis. PhD Thesis, University of Huddersfield, Huddersfield.
Kwuimy, C.K., Kankar, P., Chen, Y., Chaudhry, Z. and Nataraj, C. (2015) Development of Recurrence Analysis for Fault Discrimination in Gears. Proceedings of the ASME IDETC/CIE, V008T13A079.
Vachtsevanos, G., Lewis, F., Roemer, M., Hess, A. and Wu, B. (2006) Intelligent Fault Diagnosis and Prognosis for Engineering Systems. Wiley, Hoboken. https://doi.org/10.1002/9780470117842
Peng, F., Yu, D. and Luo, J. (2011) Sparse Signal Decomposition Method Based on Multi-Scale Chirplet and Its Application to The Fault Diagnosis of Gearboxes. Mechanical Systems and Signal Processing, 25, 549-557. https://doi.org/10.1016/j.ymssp.2010.06.004
Syta, A., Jonak, J., Jedlinski, L. and Litak, G. (2012) Failure Diagnosis of a Gear Box by Recurrences. Journal of Vibration and Acoustics, 134, Article ID: 041006. https://doi.org/10.1115/1.4005846
Mohamad, T.H., Samadani, M. and Nataraj, C. (2018) Rolling Element Bearing Diagnostics Using Extended Phase Space Topology. Journal of Vibration and Acoustics.
Mohamad, T.H., Kwuimy, C.K. and Nataraj, C. (2017) Discrimination of Multiple Faults in Bearings Using Density-Based Orthogonal Functions of the Time Response. Proceedings of the ASME IDETC/CIE, V008T12A035.
Mohamad, T.H. and Nataraj, C. (2017) Gear Fault Diagnostics Using Extended Phase Space Topology. Annual Conference of the Prognostics and Health Management Society.
Samadani, M., Mohamad, T.H. and Nataraj, C. (2016) Feature Extraction for Bearing Diagnostics Based on the Characterization of Orbit Plots with Orthogonal Functions. Proceedings of the ASME IDETC/CIE, Charlotte, 21-24 August 2016, V008T10A026. https://doi.org/10.1115/DETC2016-60438
Zbilut, J.P., Thomasson, N. and Webber, C.L. (2002) Recurrence Quantification Analysis as a Tool for Nonlinear Exploration of Nonstationary Cardiac Signals. Medical Engineering & Physics, 24, 53-60. https://doi.org/10.1016/S1350-4533(01)00112-6
Bishop, C. (2006) Pattern Recognition and Machine Learning. Springer-Verlag, New York.
Cortes, C. and Vapnik, V. (1995) Machine Learning. Support Vector Networks, 20, 273-297.
Vapnik, V. (1998) Statistical Learning Theory. Wiley, New York.
Schölkopf, B., Burges, C.J. and Smola, A.J. (1999) Advances in Kernel Methods: Support Vector Learning. MIT Press, Cambridge.
Wang, Z. and Xue, X. (2014) Multi-Class Support Vector Machine. In: Support Vector Machines Applications, Springer, Berlin, 23-48. https://doi.org/10.1007/978-3-319-02300-7_2
Kappaganthu, K., Nataraj, C. and Samanta, B. (2011) Feature Selection for Bearing Fault Detection Based on Mutual Information. In: IUTAM Symposium on Emerging Trends in Rotor Dynamics, Springer, Berlin, 523-533. https://doi.org/10.1007/978-94-007-0020-8_44
Kappaganthu, K. and Nataraj, C. (2011) Feature Selection for Fault Detection in Rolling Element Bearings Using Mutual Information. Journal of Vibration and Acoustics, 133, Article ID: 061001. https://doi.org/10.1115/1.4003400
Kappaganthu, K. and Nataraj, C. (2011) Mutual Information Based Feature Selection from Data Driven and Model Based Techniques for Fault Detection in Rolling Element Bearings. Proceedings of the ASME IDETC/CIE, Washington DC, 28-31 August 2011, 941-953. https://doi.org/10.1115/DETC2011-47822
Duda, R.O., Hart, P. and Stork, D. (2001) Pattern Classification. Wiley Interscience, New York.