The Effect of Traffic on Ballast Settlement
- 1 Ethiopian Railway Corporation, Addis Ababa, Ethiopia
- 2 Ethiopian Railway Corporation, Addis Ababa, Ethiopia
Abstract
The main factor that contributes to the deterioration of track components is traffic load. Explanations on how the speed, load and repetition of traffic influence the long-term settlement of ballast in a ballasted track are very scarce. Having in mind that tracks subjected to the same load show different settlement behaviors, explanations of track settlements in accordance with the speed, load and repetition are needed. This study is motivated to show how traffic affects the long-term settlement of ballast and how the traffic parameters (speed, load and repetition) contribute to the process. Using finite element modeling software, the three-dimensional track is modeled and analyzed for different values of speed, load and number of repetitions. Drucker Prager plastic model is applied for the ballast and sub-ballast materials of the track. To get the parameters for the Drucker Prager plastic model of granular materials, triaxial test simulation is performed using discrete element software. Hertz’s contact theory is used to model the contact between the wheel and rail. The long-term settlement behavior of ballast material is analyzed by applying 8000 cycles of moving axel load. According to the analyses, a change in the speed and the number of repetitions of train movement changes the permanent settlement of ballast more than the variation in load. Increase in the speed of train movement by 20 km/hr. will increase the stress transferred to the subgrade by up to about 1000 kPa. Speed of train movement is the most contributing parameter in the degradation of ballast material more than the load and number of repetitions. In a conventional ballasted track after about 6000 repetitions of train movement ballast material will start to decrease its performance. The comparison of the effects of the variation of individual traffic parameters speed, load and number of repetitions on the settlement of ballast which is not touched by former researches is well addressed by this study which is very helpful for designing a new railway track and monitoring existing railway tracks. Based on the analysis of the model with the parameters from Ethio-Djibouti standard gauge railway track, the possible maintenance period of ballast material is predicted.
- Shi, X. (2009, April) Prediction of Permanent Deformation in Railway Track. The University of Nottingham, Nottingham.
- Abdu, K. (2014) Assessment of Degradation and Performance Improvement of Railway Ballast with Geosynthetics—A Case Study of National Railway Network. School of Civil and Environmental Engineering, Addis Ababa Institute of Technology, Addis Ababa.
- Tzanakakis, K. (2013) Railway Track and Its Long-Term Behavior: A Handbook for Railway Track of High Quality. Springer-Verlag, Berlin, Heidelberg.
- Catarino, D., Alves-Ribeiro, C. and Vale, C. (2015) Analysis of The Influence of The Permanent Deformation of Ballast Layer in the Railway Track Degradation Based on Numerical Simulations. Civil Engineering Department, University of Porto, Portugal.
- Nguyen, K., Goicolea, J.M. and Galbadón, F. (2011) Dynamic Effect of High-Speed Railway Traffic Loads on the Ballast Track Settlement. School of civil Engineering, Technical University of Madrid, Madrid, Spain.
- Abateneh, Y.A. (2011) Survey of Railway Ballast Specification and Aspects of Modeling Techniques. Royal Institute of Technology, Stockholm.
- CREC Addis Ababa-Mieso Railway Project (2015) Testing Report for Stone Ballast No.1 and 2nd Testing Report for Stone Ballast.
- (2007) Chinese Rail Standard (National Standards of the People’s Republic of China). GB 2585-2007.
- McDowell, G.R. and Li, H. (2016) Discrete Element Modelling of Scaled Railway Ballast under Triaxial Conditions. Granular Matter, 18, Article No. 66. https://doi.org/10.1007/s10035-016-0663-8
- Mir, A., Luo1, X. and Siddiq, A. (2015) Numerical Simulation of Triaxial Tests to Determine the Drucker-Prager Parameters of Silicon. Proceedings of the 2015 21st International Conference on Automation & Computing, Glasgow, 11-12 September 2015, 1-4. https://doi.org/10.1109/IConAC.2015.7313993
- Zhao, S. and Li, S. (2013) Stress Strain Analysis of Loess Triaxial Shear Test by PFC3D, College of Construction Engineering. Jilin University, Changchun.
- Cheng, Y.P, Nakata, Y. and Bolton, M.D. (2003) Discrete Element Simulation of Crushable Soil. Geotechnique, 53, 633-641. https://doi.org/10.1680/geot.2003.53.7.633
- Lobo-Guerrero, S., Vallejo, L.E. and Vesga, L.F. (2006) Visualization of Crushing Evolution in Granular Materials under Compression using DEM. International Journal of Geomechanics, 6, 195-200. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:3(195)