Using Connected Truck Trajectory Data to Compare Speeds in States with and without Differential Truck Speeds
- 1 Joint Transportation Research Program, Purdue University, West Lafayette, USA
- 2 Joint Transportation Research Program, Purdue University, West Lafayette, USA
- 3 Joint Transportation Research Program, Purdue University, West Lafayette, USA
- 4 Joint Transportation Research Program, Purdue University, West Lafayette, USA
Abstract
Historically, researchers and practitioners have utilized spot speeds and mic roscopic simulation methodologies to evaluate the operational impact of differential or uniform speed limits for trucks and passenger vehicles. This paper presents a methodology that uses connected truck data to develop a statistical characterization of both passenger car and truck speeds. These techniques were applied to three adjacent states, Illinois, Indiana and Ohio. Illinois and Ohio have 70 mph speed limits for both trucks and cars. Indiana has a differential speed limit for heavy trucks (65 mph) and passenger cars (70 mph). The statistical distribution of truck speeds was then compared among Illinois, Indiana and Ohio. These speeds were derived from over 8 million connected truck records traveling along Interstate 70 in Illinois, Indiana and Ohio during a one-week period from May 8-14, 2022. Statistical test results over selected 20-mile sections in each state showed that median truck speeds in Indiana with its differential speed limit of 65 mph were only 1 - 2 mph lesser than the neighboring states of Illinois and Ohio who observe a uniform speed limit of 70 mph for all traffic.
- Friedman, L.S., Hedeker, D. and Richter, E.D. (2009) Long-Term Effects of Repealing the National Maximum Speed Limit in the United States. American Journal of Public Health, 99, 1626-1631. https://doi.org/10.2105/AJPH.2008.153726
- Ghods, A.H., Saccomanno, F. and Guido, G. (2012) Effect of Car/Truck Differential Speed Limits on Two-Lane Highways Safety Operation Using Microscopic Simulation. Procedia—Social and Behavioral Sciences, 53, 833-840. https://doi.org/10.1016/j.sbspro.2012.09.932
- Sun, X. and Garber, N.J. (2002) Determining the Safety Effects of Differential Speed Limits on Rural Interstate Highways Using Empirical Bayes Method.
- Alrejjal, A. and Ksaibati, K. (2022) Impact of Mountainous Interstate Alignments and Truck Configurations on Rollover Propensity. Journal of Safety Research, 80, 160-174. https://doi.org/10.1016/j.jsr.2021.11.012
- Godavarthy, R.P. and Russell, E.R. (2015) Low-Clearance Truck’s Vertical Requirements at Roundabouts. Journal of Transportation Technologies, 5, 214-222. https://doi.org/10.4236/jtts.2015.54020
- Shin, J. and Lee, I. (2014) Reliability-Based Vehicle Safety Assessment and Design Optimization of Roadway Radius and Speed Limit in Windy Environments. Journal of Mechanical Design, 136, Article ID: 081006. https://doi.org/10.1115/1.4027512
- Garber, N.J., Miller, J.S., Sun, X. and Yuan, B. (2006) Safety Impacts of Differential Speed Limits for Trucks and Passenger Cars on Rural Interstate Highways: A Modified Empirical Bayes Approach. Journal of Transportation Engineering, 132, 19-29. https://doi.org/10.1061/(ASCE)0733-947X(2006)132:1(19)
- Garber, N.J., Miller, J.S., Yuan, B., Sun, X. and Virginia Transportation Research Council (2005) Safety Impacts of Differential Speed Limits on Rural Interstate Highways. Publication FHWA-HRT-05-042.
- Khondaker, B. and Kattan, L. (2015) Variable Speed Limit: An Overview. Transportation Letters, 7, 264-278. https://doi.org/10.1179/1942787514Y.0000000053
- Russo, B.J., Rista, E., Savolainen, P.T., Gates, T.J. and Frazier, S. (2015) Vehicle Speed Characteristics in States with Uniform and Differential Speed Limit Policies: Comparative Analysis. Transportation Research Record, 2492, 1-9. https://doi.org/10.3141/2492-01
- Garber, N.J. and Gadiraju, R. (1992) Impact of Differential Speed Limits on the Speed of Traffic and the Rate of Accidents. Transportation Research Record, 1375, 44-52.