Electric vehicles use electric motors, which turn electrical energy into mechanical energy. As electric motors are conventionally used in all the industry, it is an established development site. It’s a mature technology with ideal power and torque curves for vehicular operation. Conventional vehicles use oil and gas as fuel or energy storage. Although they also have an excellent economic impact, the continuous use of oil and gas threatened the world’s reservation of total oil and gas. Also, they emit carbon dioxide and some toxic ingredients through the vehicle’s tailpipe, which causes the greenhouse effect and seriously impacts the environment. So, as an alternative, electric car refers to a green technology of decarbonization with zero emission of greenhouse gases through the tailpipe. So, they can remove the problem of greenhouse gas emissions and solve the world’s remaining non-renewable energy storage problem. Pure electric vehicles (PEV) can be applied in all spheres, but their special implementation can only be seen in downhole operations. They are used for low noise and less pollution in the downhole process. In this study, the basic structure of the pure electric command vehicle is studied, the main components of the command vehicle power system, namely the selection of the drive motor and the power battery, are analyzed, and the main parameters of the drive motor and the power battery are designed and calculated. The checking calculation results show that the power and transmission system developed in this paper meets the design requirements, and the design scheme is feasible and reasonable.
KeywordsPure Electric VehiclesTransmissionGearsElectronic DifferentialControl Algorithms
Zhao, Y.D. (2009) Development Status and Trends of Underground Vehicles for Metal Mines (1). Modern Mining, 25, 47-50.
Wang, B.K., Jin, J. and Yuan, X.M. (2015) The Development Status and Critical Technologies of Electric Trackless Transportation Vehicles for Mines. Coal Science and Technology, 43, 74-75.
Yuan, X.M. (2011) Research on the Key Technology of Coal Mine Electric Trackless Transportation Vehicles. Coal Science and Technology, 39, 80-82.
(2008) Production of China’s First New Type of Explosion-Proof Command Vehicle for Coal Mines Rolled off the Production Line. Journal of China Coal Society, No. 8, 950.
(2015) The Development of a New Underground Energy Command Vehicle by Shimei Machinery. Mining Machinery, No. 7, 158-158.
Zhang, C.W. and Guo, W. (2012) Technical Progress of Trackless Rubber-Tyred Electric Vehicles in Underground Coal Mines. Coal Mine Machinery, 33, 1-3.
Zhang, Z. (2011) The Design of Pure Electric Vehicle Power Transmission System and Vehicle Performance Simulation. Chang’an University, Chang’an.
Lajunen, A. (2011) Evaluation of Energy Storage System Requirements for Hybrid Mining Loader. 2011 IEEE Vehicle Power and Propulsion Conference, Chicago, 6-9 September 2011, 1-6. https://doi.org/10.1109/VPPC.2011.6043069
Yang, J.W. and Huang, Y. (2011) Design of WC5R Coal Mine Explosion-Proof Diesel Engine Trackless Rubber Wheel Command Vehicle. Special Purpose Vehicle, No. 3, 60-62.
Ehsani, M., Gao, Y., Longo, S. and Ebrahimi, K. (2018) Modern Electric, Hybrid Electric, and Fuel Cell Vehicles. CRC Press, Boca Raton. https://doi.org/10.1201/9781420054002
Gao, Y., Maghbelli, H., Ehsani, M., Frazier, G., Kajs, J. and Bayne, S. (2003) Investigation of Proper Motor Drive Characteristics for Military Vehicle Propulsion. SAE International, Warrendale. https://doi.org/10.4271/2003-01-2296
Anderson, C. and Pettit, E. (1995) The Effects of APU Characteristics on the Design of Hybrid Control Strategies for Hybrid Electric Vehicles. SAE International, Warrendale. https://doi.org/10.4271/950493
Fenton, J. and Hodkinson, R. (2001) Lightweight Electric/Hybrid Vehicle Design. Elsevier, Amsterdam. https://doi.org/10.1016/B978-075065092-2/50009-2
Zhang, L., Li, L., Qi, B. and Song, J. (2015) Configuration Analysis and Performance Comparison of Drive Systems for Pure Electric Vehicle. SAE International, Warrendale. https://doi.org/10.4271/2015-01-1165
Country Estate (2013) Optimal Design and Simulation of Electric Vehicle Power System. Wuhan University of Technology, Wuhan.
Wu, Q.D. (2011) Research on Matching Design and Performance Simulation of Electric Vehicle Power System. Jilin University, Changchun.
Lebeau, K., Van Mierlo, J., Lebeau, P., Mairesse, O. and Macharis, C. (2012) The Market Potential for Plug-In Hybrid and Battery Electric Vehicles in Flanders: A Choice-Based Conjoint Analysis. Transportation Research Part D: Transport and Environment, 17, 592-597. https://doi.org/10.1016/j.trd.2012.07.004
Cheng, M., Sun, L., Buja, G. and Song, L. (2015) Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles. Energies, 8, 9541-956. https://doi.org/10.3390/en8099541
Tahami, F., Kazemi, R. and Farhanghi, S. (2003) A Novel Driver Assist Stability System for All-Wheel-Drive Electric Vehicles. IEEE Transactions on Vehicular Technology, 52, 683-692. https://doi.org/10.1109/TVT.2003.811087
Chau, K. (2009) Electric Motor Drives for Battery, Hybrid and Fuel Cell Vehicles. In: Electric Vehicles: Technology, Research and Development, Nova Science, Hauppauge, 1-40.
Zhu, Z.-Q. and Howe, D. (2007) Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles. Proceedings of the IEEE, 95, 746-765. https://doi.org/10.1109/JPROC.2006.892482
Shrestha, A., Phuyal, S., Shrestha, P., Mali, B. and Rana, L.B. (2018) Comparative Analysis of Regenerative Power and Fuel Consumption of Hybrid Electric Vehicle. Journal of Asian Electric Vehicles, 16, 1799-1809. https://doi.org/10.4130/jaev.16.1799
Chan, C.C. and Chau, K. (1997) An Overview of Power Electronics in Electric Vehicles. IEEE Transactions on Industrial Electronics, 44, 3-13. https://doi.org/10.1109/41.557493
Nasar, S.A. and Unnewehr, L.E. (1983) Electromechanics and Electric Machines. John Wiley & Sons, Hoboken.
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M.N. and Hossain, E. (2017) A Comprehensive Study of Key Electric Vehicle (E.V.) Components, Technologies, Challenges, Impacts, and Future Direction of Development. Energies, 10, Article No. 1217. https://doi.org/10.3390/en10081217
Rajashekara, K. (2013) Present Status and Future Trends in Electric Vehicle Propulsion Technologies. IEEE Journal of Emerging and Selected Topics in Power Electronics, 1, 3-10. https://doi.org/10.1109/JESTPE.2013.2259614
Ching, T.W. (2006) Four-Quadrant Zero-Current-Transition Converter-Fed D.C. Motor Drives for Electric Propulsion. Journal of Asian Electric Vehicles, 4, 911-917. https://doi.org/10.4130/jaev.4.911
Cornell, E., Guess, R. and Turnbull, F. (1977) Advanced Motor Developments for Electric Vehicles. IEEE Transactions on Vehicular Technology, 26, 128-134. https://doi.org/10.1109/T-VT.1977.23669
Chau, K. (2015) Electric Vehicle Machines and Drives: Design, Analysis and Application. John Wiley & Sons, Hoboken. https://doi.org/10.1002/9781118752555
Cody, J. (2008) Regenerative Braking Control for a BLDC Motor in Electric Vehicle Applications. Bachelor’s Thesis, School of Electrical and Information Engineering, University of South Australia, Adelaide.
Emadi, A. (2017) Handbook of Automotive Power Electronics and Motor Drives. CRC Press, Boca Raton. https://doi.org/10.1201/9781420028157
Su, G.-J., McKeever, J.W. and Samons, K.S. (2000) Design of a PM Brushless Motor Drive for Hybrid Electrical Vehicle Application. Proceedings of the PCIM 2000 Conference, Boston, 1-5 October 2000, 35-43.
Cody, J., Göl, Ö., Nedic, Z., Nafalski, A. and Mohtar, A. (2020) Regenerative Braking in an Electric Vehicle. http://www.komel.katowice.pl/zeszyty.html
Rahman, K.M. and Ehsani, M. (1996) Performance Analysis of Electric Motor Drives for Electric and Hybrid Electric Vehicle Applications. Proceedings of the Power Electronics in Transportation, Dearborn, 24-25 October 1996, 49-56.
Yamada, K., Watanabe, K., Kodama, T., Matsuda, I. and Kobayashi, T. (1996) An Efficiency Maximizing Induction Motor Drive System for Transmissionless Electric Vehicle. Proceedings of the 13th International Electric Vehicle Symposium, Osaka, 13-16 October 1996, 529-536.
Boglietti, A., Ferraris, P., Lazzari, M. and Profumo, F. (1993) A New Design Criteria for Spindles Induction Motors Controlled by Field Oriented Technique. Electric Machines and Power Systems, 21, 171-182. https://doi.org/10.1080/07313569308909645
Bose, B.K. (2010) Power Electronics and Motor Drives: Advances and Trends. Elsevier, Amsterdam.
Abbasian, M., Moallem, M. and Fahimi, B. (2010) Double-Stator Switched Reluctance Machines (DSSRM): Fundamental and Magnetic Force Analysis. IEEE Transactions on Energy Conversion, 25, 589-597. https://doi.org/10.1109/TEC.2010.2051547
Cameron, D.E., Lang, J.H. and Umans, S.D. (1992) The Origin and Reduction of Acoustic Noise in Doubly Salient Variable-Reluctance Motors. IEEE Transactions on Industry Applications, 28, 1250-1255. https://doi.org/10.1109/28.175275
Gallegos-Lopez, G., Kjaer, P.C., Miller, T. and White, G. (2003) Simulation Study of Resonant D.C. Link Inverter for Current-Controlled Switched Reluctance Motors. Proceedings of the 2nd International Conference on Power Electronics and Drive Systems, Singapore, 17-20 November 2003, 757-761.
Husain, I. and Ehsani, M. (1996) Torque Ripple Minimization in Switched Reluctance Motor Drives by PWM Current Control. IEEE Transactions on Power Electronics, 11, 83-88. https://doi.org/10.1109/63.484420
Krishnan, R. (2017) Switched Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and Applications. CRC Press, Boca Raton. https://doi.org/10.1201/9781420041644
Miller, T.J.E. (1993) Switched Reluctance Motors and Their Control. Magna Physics Publishing and Clarendon Press, Oxford.