Robust Parameter Identification Method of Adhesion Model for Heavy Haul Trains
- 1 College of Railway Transportation, Hunan University of Technology, Zhuzhou, China
- 2 College of Electronic Information and Electrical Engineering, Changsha University, Changsha, China
- 3 College of Electrical and Information Engineering, Hunan University of Technology, Zhuzhou, China
Abstract
A robust parameter identification method based on Kiencke model was proposed to solve the problem of the parameter identification accuracy being affected by the rail environment change and noise interference for heavy-duty trains. Firstly, a Kiencke stick-creep identification model was constructed, and the parameter identification task was transformed into a quadratic programming problem. Secondly, an iterative algorithm was constructed to solve the problem, into which a time-varying forgetting factor was added to track the change of the rail environment, and to solve the uncertainty problem of the wheel-rail environment. The Granger causality test was adopted to detect the interference, and then the weights of the current data were redistributed to solve the problem of noise interference in parameter identification. Finally, simulations were carried out and the results showed that the proposed method could track the change of the track environment in time, reduce the noise interference in the identification process, and effectively identify the adhesion performance parameters .
- He, J., Liu, J.H. and Zhang, C.F. (2018) Research Review on Wheel-Rail Adhesion Utilization Technology of Heavy Duty Locomotive. Journal of the China Railway Society, 40, 30-39.
- Wang, H. (2013) Research on Wheel-Rail Adhesion Characteristics under the Third Medium Condition. Master’s Thesis, Southwest Jiaotong University, Chengdu.
- Li, Y.F., Feng, X.Y. and Liur, K. (2011) Maximum Adhesion Control of Railway Based on Sliding Mode Control System. Advanced Materials Research, 383-390, 5242-5249. https://doi.org/10.4028/www.scientific.net/AMR.383-390.5242
- Spiryagin, M., Cole, C. and Sun, Y.Q. (2014) Adhesion Estimation and Its Implementation for Traction Control of Locomotives. International Journal of Rail Transportation, 2, 187-204. https://doi.org/10.1080/23248378.2014.924842
- Faff, R. and Gray, P. (2005) On the Estimation and Comparison of Short-Rate Models Using the Generalised Method of Moments. Journal of Banking and Finance, 30, 3131-3146. https://doi.org/10.1016/j.jbankfin.2005.09.016
- Cheng, B. (2017) Bayesian Estimation of Short-Term Interest Rate Model. Master’s Thesis, Nanjing University of Science and Technology, Nanjing.
- He, J., Liu, G.W. and Zhang, C.F. (2017) Maximum Likelihood Identification Method for Adhesion Energy Parameters of Heavy Duty Locomotive. Chinese Journal of Electronic Measurement & Instrument, 31, 170-177.
- Li, F., Liang, M.J. and Luo, Y.S. (2022) Two-Stage Identification of Hammerstein Nonlinear System Corrupted by Colored Noise. Information and Control, 51, 610-617+630. https://doi.org/10.13976/j.cnki.xk.2022.1241
- Liu, G.F. (2007) An Investigation of Vehicle Anti-Lock Braking System Based on Slip-Ratio. Ph.D. Thesis, National University of Defense Technology, Changsha.
- He, J., Yang, X.X., Zhang, C.F. and Xiao, M.J. (2023) Sliding Mode Consistency Tracking Control of Multiple Heavy Haul Trains Under Input Saturation and Safety Distance. Constraints, Journal of the Franklin Institute, 360, 9028-9049. https://doi.org/10.1016/j.jfranklin.2022.07.003
- Wu, M. (2012) Theoretical Study of Semi-Parametric Statistical Method and Its Application in Climate. Master’s Thesis, Xi’an Polytechnic University, Xi’an.