In ground vehicles, the brake is an essential system to ensure the safety of movement. Multiple braking mechanisms have been introduced for use in vehicles. This study explores the potential of using magneto-rheological fluid (MRF) brakes in automotive applications. MRF brakes offer controllable braking force due to a magnetic field, but their use is limited by simulation challenges. In this study, a 7-tooth MRF brake model is proposed. The brake model is simulated in Altair Flux software to analyze magnetic field distribution, braking torque, and its variation under different currents and disc speeds. The simulation conditions also consider both viscous and electromagnetic torque components. Then, the results are analyzed across different brake regions, including rotor, stator, and fluid gap. These results provide valuable insights for designing, manufacturing, installing, and testing MRF brakes for automotive use.
Zainordin, A.Z., Mohamed, Z. and Ahmad, F. (2021) The Magnetorheological Fluid: Testing on Automotive Braking System. International Journal of Automotive and Mechanical Engineering , 18, 8577-8584. https://doi.org/10.15282/ijame.18.1.2021.16.0651
Wang, D., Yang, G., Luo, Y., Fang, S. and Dong, T. (2023) Optimal Design and Stability Control of an Automotive Magnetorheological Brake Considering the Temperature Effect. Smart Materials and Structures , 32, Article ID: 025020. https://doi.org/10.1088/1361-665x/acb1e2
Kamble, R. and Patil, S. (2019) Exploring Magnetorheological Brake Based Anti-Lock Brake System for Automotive Application: Exploring MRB-Based ABS for Automotive Application. https://orcid.org/0000-0003-2653-9605
Bydon, S. (2002) Construction and Operation of Magnetorheological Rotary Brake. Archiwum Process Control , 20.
Liu, B., Li, W.H., Kosasih, P.B. and Zhang, X.Z. (2006) Development of an MR-Brake-Based Haptic Device. Smart Materials and Structures , 15, 1960-1966. https://doi.org/10.1088/0964-1726/15/6/052
Karakoc, K., Park, E.J. and Suleman, A. (2008) Design Considerations for an Automotive Magnetorheological Brake. Mechatronics , 18, 434-447. https://doi.org/10.1016/j.mechatronics.2008.02.003
Park, E.J., Stoikov, D., Falcao da Luz, L. and Suleman, A. (2006) A Performance Evaluation of an Automotive Magnetorheological Brake Design with a Sliding Mode Controller. Mechatronics , 16, 405-416. https://doi.org/10.1016/j.mechatronics.2006.03.004
Park, E.J., da Luz, L.F. and Suleman, A. (2008) Multidisciplinary design optimization of an automotive magnetorheological brake design. Computers & Structures , 86, 207-216. https://doi.org/10.1016/j.compstruc.2007.01.035
Carlson, J.D. (2001) Magnetorheological Brake with Integrated Flywheel. US Patent No.6186290 B1. United States Patent Office.
Nguyen, Q.H., Nguyen, N.D. and Choi, S. (2014) Optimal Design of a Novel Configuration of MR Brake with Coils Placed on the Side Housings. SPIE Proceedings . https://doi.org/10.1117/12.2044561
Qin, H., Song, A. and Mo, Y. (2019) Evaluation of a Multi-Drum Magnetorheological Brake via Finite Element Analysis Considering Number of Drums and Fluid Gap Selection in Optimization. Journal of Intelligent Material Systems and Structures , 30, 778-787. https://doi.org/10.1177/1045389x19828517
Ngọc, N.A. (2016) Development and Analysis of New Multipole Magnetorheological Brake. Master’s Thesis.
Assadsangabi, B., et al. (2011) Optimization and Design of Disk-Type MR Brakes. International Journal of Automotive Technology , 12, 921-932.
Usoro, P.B., Smith, A.I., Moser, G. and Sommer, G. (2001) Magnetorheological Fluid Clutch. Patent US Patent Specification 6,318,531 B1.
Güth, D., Schamoni, M. and Maas, J. (2013) Magnetic Fluid Control for Viscous Loss Reduction of High-Speed MRF Brakes and Clutches with Well-Defined Fail-Safe Behavior. Smart Materials and Structures , 22, Article ID: 094010. https://doi.org/10.1088/0964-1726/22/9/094010
Shamieh, H. and Sedaghati, R. (2018) Development, Optimization, and Control of a Novel Magnetorheological Brake with No Zero-Field Viscous Torque for Automotive Applications. Journal of Intelligent Material Systems and Structures , 29, 3199-3213. https://doi.org/10.1177/1045389x18758186
Park, E.J., da Luz, L.F. and Suleman, A. (2008) Multidisciplinary Design Optimization of an Automotive Magnetorheological Brake Design. Computers & Structures , 86, 207-216. https://doi.org/10.1016/j.compstruc.2007.01.035
Le-Duc, T., Ho-Huu, V. and Nguyen-Quoc, H. (2018) Multi-objective Optimal Design of Magnetorheological Brakes for Motorcycling Application Considering Thermal Effect in Working Process. Smart Materials and Structures , 27, Article ID: 075060. https://doi.org/10.1088/1361-665x/aacb40
Daoming, W., Lan, Y., Wenbin, S., Bin, Z. and Wuwei, C. (2019) Simulation and Experimental Study on Temperature Characteristics of Magnetorheological Fluid Brake for Vehicles. Journal of Mechanical Engineering , 55, Article 100. https://doi.org/10.3901/jme.2019.06.100
Patil, S.R., Powar, K.P. and Sawant, S.M. (2016) Thermal Analysis of Magnetorheological Brake for Automotive Application. Applied Thermal Engineering , 98, 238-245. https://doi.org/10.1016/j.applthermaleng.2015.11.128
Tuan, H.Q., Hoang, T.M. and Khoa, N.X. (2023) A Study the Effect of Key Parameters on the Magneto-Rheological Brake Torque Based on the Sim Method. ARPN Journal of Engineering and Applied Sciences , 18, 1534-1538. https://doi.org/10.59018/0723192
Lord Technical Data 2019 MRF-140CG Magneto-Rheological Fluid. https://www.lord.com
Le-Duc, T. and Hung, N.Q. (2019) Design, Manufacturing and Testing of Magnetorheological Brake for Small Size Motorcycle. The First International Conference on Material , Machines and Methods for Sustainable Development , Danang, 18-19 May 2018. https://www.researchgate.net/publication/330292202
Shiao, Y. and Nguyen, Q. (2013) Development of a Multi-Pole Magnetorheological Brake. Smart Materials and Structures , 22, Article ID: 065008. https://doi.org/10.1088/0964-1726/22/6/065008