Non-Contact Acoustic Emission Detection of External Rail Defects Using Air-Coupled Sensors
- 1 Department of Civil and Environmental Engineering and Construction, University of Nevada, Las Vegas, NV, USA
- 2 Department of Civil and Environmental Engineering and Construction, University of Nevada, Las Vegas, NV, USA
- 3 Department of Electrical and Computer Engineering, University of Nevada, Las Vegas, NV, USA
- 4 Department of Electrical and Computer Engineering, University of Nevada, Las Vegas, NV, USA
- 5 Department of Electrical and Computer Engineering, University of Nevada, Las Vegas, NV, USA
- 6 Department of Civil and Environmental Engineering and Construction, University of Nevada, Las Vegas, NV, USA
Abstract
Rail defects, both internal and external, pose significant safety risks. Acoustic Emission (AE) technology has emerged as a promising method for monitoring damage progression and detecting rail defects. This research aims to investigate AE signal characteristics generated from external rail defects using both rail-mounted and vehicle-mounted settings. This investigation is expected to enhance our understanding of how AE signals correlate with defects and how effectively they can identify them. The results of the tests revealed two key findings. First, the AE detection rate is low, which suggests that AE detection rates may depend heavily on defect size and field conditions. Second, wavelet packet power (WPP) analysis indicates that the AE signals from external rail defects exhibited concentrated and intense peaks within the 100 - 160 kHz range. Overall, detecting external defects showed low performance due to indistinct AE signal characteristics and significant environmental noise. However, the application of continuous wavelet transforms (CWT) and wavelet packet power analysis presented more insights by identifying energy distributions and frequency peaks associated with external defects.
- Li, Q. and Ren, S. (2012) A Real-Time Visual Inspection System for Discrete Surface Defects of Rail Heads. IEEE Transactions on Instrumentation and Measurement , 61, 2189-2199. https://doi.org/10.1109/tim.2012.2184959
- Deutschl, E., Gasser, C., Niel, A. and Werschonig, J. (2004) Defect Detection on Rail Surfaces by a Vision Based System. IEEE Intelligent Vehicles Symposium , 2004, Parma, 14-17 June 2004, 507-511. https://doi.org/10.1109/ivs.2004.1336435
- Xiong, Z., Li, Q., Mao, Q. and Zou, Q. (2017) A 3D Laser Profiling System for Rail Surface Defect Detection. Sensors , 17, Article 1791. https://doi.org/10.3390/s17081791
- Office of Railroad Policy and Development (2011) Rolling Contact Fatigue: A Com-prehensive Review. https://railroads.dot.gov/sites/fra.dot.gov/files/fra_net/89/TR_Rolling_Contact_Fatigue_Comprehensive_Review_final.pdf
- Thomas Heckel, H.M.T., Kreutzbruck, M. and Rühe, S. (2009) High Speed Non-Destructive Rail Testing with Advanced Ultrasound and Eddy-Current Testing Techniques. https://www.ndt.net/article/Prague2009/ndtip/proceedings/Heckel_10.pdf
- Thomas, H., Heckel, T. and Hanspach, G. (2007) Advantage of a Combined Ultrasonic and Eddy Current Examination for Railway Inspection Trains. Insight — Non - Destructive Testing and Condition Monitoring , 49, 341-344. https://doi.org/10.1784/insi.2007.49.6.341
- Papaelias, M.P., Roberts, C., Davis, C.L., Blakeley, B. and Lugg, M. (2010) Further Developments in High-Speed Detection of Rail Rolling Contact Fatigue Using ACFM Techniques. Insight — Non - Destructive Testing and Condition Monitoring , 52, 358-360. https://doi.org/10.1784/insi.2010.52.7.358
- Sadeghi, F., Jalalahmadi, B., Slack, T.S., Raje, N. and Arakere, N.K. (2009) A Review of Rolling Contact Fatigue. Journal of Tribology , 131, Article ID: 041403. https://doi.org/10.1115/1.3209132
- Liu, Z., Li, W., Xue, F., Xiafang, J., Bu, B. and Yi, Z. (2015) Electromagnetic Tomography Rail Defect Inspection. IEEE Transactions on Magnetics , 51, 1-7. https://doi.org/10.1109/tmag.2015.2430283
- Bruzelius, K. and Mba, D. (2004) An Initial Investigation on the Potential Applicability of Acoustic Emission to Rail Track Fault Detection. NDT & E International , 37, 507-516. https://doi.org/10.1016/j.ndteint.2004.02.001
- Nivesrangsan, P., Steel, J.A. and Reuben, R.L. (2007) Source Location of Acoustic Emission in Diesel Engines. Mechanical Systems and Signal Processing , 21, 1103-1114. https://doi.org/10.1016/j.ymssp.2005.12.010