Calibration of Channel Roughness for Mahanadi River, (India) Using HEC-RAS Model
- 1 Center for Water Engineering and Management, Central University of Jharkhand, Ranchi, India
- 2 National Water Academy, Pune, India
- 3 Department of Water Resources, Bhubaneshwar, India
Abstract
Channel roughness is the most sensitive parameter in development of hydraulic model for flood forecasting and flood plane mapping. Hence, in the present study it is attempted to calibrate the channel roughness coefficient (Manning’s “n” value) along the river Mahanadi, Odisha through simulation of floods using HEC-RAS. For calibration of Manning’s “n” value the flood of year 2003 has been considered. The calibrated model, in terms of channel roughness, has been used to simulate the flood for year 2006 in the same river reach. The performance of the calibrated and validated HEC-RAS based model is tested using Nash and Sutcliffe efficiency. It is concluded from the simulation study that Mannnig’s “n” value of 0.032 gives best result for Khairmal to Munduli reach of Mahanadi River.
- W.-M. Bao, X.-Q. Zhang and S.-M. Qu, “Dynamic Correction of Roughness in the Hydrodynamic Model,” Journal of Hydrodynamics, Vol. 21, No. 2, 2009, pp. 255-263. doi:10.1016/S1001-6058(08)60143-2
- R. Ramesh, B. Datta, M. Bhallamudi and A. Narayana, “Optimal Estimation of Roughness in Open-Channel Flows,” Journal of Hydraulic Engineering, Vol. 126, No. 4, 1997, pp. 299-303. doi:10.1061/(ASCE)0733-9429(2000)126:4(299)
- S. Patro, C. Chatterjee, S. Mohanty, R. Singh and N. S. Raghuwanshi, “Flood Inundation Modeling Using Mike Flood and Remote Sensing Data,” Journal of the Indian Society of Remote Sensing, Vol. 37, No. 1, 2009, pp. 107- 118. doi:10.1007/s12524-009-0002-1
- N. Usul and T. Burak, “Flood Forecasting and Analysis within the Ulus Basin, Turkey, Using Geographic Information Systems,” Natural Hazards, Vol. 39, No. 2, 2006, pp. 213-229. doi:10.1007/s11069-006-0024-8
- R. Vijay, A. Sargoankar and A. Gupta, “Hydrodynamic Simulation of River Yamuna for Riverbed Assessment: A Case Study of Delhi Region,” Environmental Monitoring Assessment, Vol. 130, No. 1-3, 2007, pp. 381-387. doi:10.1007/s10661-006-9405-4
- A. M. Wasantha Lal, “Calibration of Riverbed Roughness,” Journal of Hydraulic Engineering, Vol. 121, No. 9, 1995, pp. 664-671. doi:10.1061/(ASCE)0733-9429(1995)121:9(664)
- P. V. Timbadiya, P. L. Patel and P. D. Porey, “Calibration of HEC-RAS Model on Prediction of Flood for Lower Tapi River, India,” Journal of Water Resources and Protection, Vol. 3, 2011, pp. 805-811. doi:10.4236/jwarp.2011.311090
- US Army Corps of Engineers, “HEC-RAS, User Manual,” Hydrologic Engineering Center, Davis Version 4.0, 2008.
- US Army Corps of Engineers, “HEC-RAS, Hydraulic Reference Manual,” Hydrologic Engineering Center, Davis Version 4.0, 2008.
- B. Mishra and S. Behera, “*,” 7th International R & D Conference on Development and Management of Water and Energy Resources, Bhubaneswar, 4-6 February 2009, pp. *.
- Government of Orissa, Department of Water Resources, “Mahanadi at a Glance,” *, Vol. 1, 2010, pp. *.
- J. E. Nash and J. V. Sutcliffe, “River Flow Forecasting through Conceptual Models, Part I-A Discussion of Principles,” Journal of Hydrology, Vol. 10, 1970, pp. 282-290. doi:10.1016/0022-1694(70)90255-6