Sorption Kinetic of Arsenate as Water Contaminant on Zero Valent Iron
- 1 Department of Earth Resources Engineering, Kyushu University, Fukuoka, Japan
- 2 Department of Earth Resources Engineering, Kyushu University, Fukuoka, Japan
- 3 Department of Earth Resources Engineering, Kyushu University, Fukuoka, Japan
Abstract
This study investigates the sorption of arsenate from water using zero-valent iron ZVI as sorbent. Batch experiments were carried out to study the sorption kinetics of arsenate under different concentrations of arsenate varies from 0.5 to 200 mg/l. A kinetic model was considered to describe the arsenates sorption on ZVI material. The kinetics of the arsenate sorption processes were described by the Langmuir kinetic model. The sorption capacity increases with high initial concentration which obtained the maximum sorption 2.1 mg/g at 200 mg/l of arsenate initial concentration. The results show that the rapid initial sorption rates of arsenate were occurred at the beginning of experiments running time, followed by a slower removal that gradually approaches an equilibrium condition. The data from laboratory batch experiments were used to verify the simulation results of the kinetic model resulting in good agreement between measured and modeled results. The results indicate that ZVI could be employed as sorbent materials to enhance the sorption processes and increase the removal rate of arsenate from water.
- WHO, “Guidelines for Drinking-Water Quality. Vol. 1: Recommendations,” 2nd Edition, WHO, Geneva, 1993.
- K. Fields, A. Chen and L. Wang, “Arsenic Removal from Drinking Water by Iron Removal Plants,” 2000.
- F. W. Pontius, G. K. Brown and J. C. Chien, “Health Implications of Arsenic in drinking Water,” Journal of American Water Works Association, Vol. 86, No. 9, 1994, pp. 52-63.
- H. H. Cho and J. W. Park, “Sorption and Reduction of Tetrachloroethylene with Zero Valent Iron and Amphiphilic Molecules,” Chemosphere, Vol. 64, No. 6, 2006, pp. 1047-1052. doi:10.1016/j.chemosphere.2005.12.062
- I. Kouznetsova, P. Bayer, M. Ebert and M. Finkel, “Modelling the Long-Term Performance of Zero-Valent Iron Using a Spatio-Temporal Approach for Iron Aging,” Journal of Contaminant Hydrology, Vol. 90, No. 1-2, 2007, pp. 58-80. doi:10.1016/j.jconhyd.2006.09.014
- Y. T. Lin, C. H. Weng and F. Y. Chen, “Effective Removal of AB24 Dye by Nano/Micro-Size Zero-Valent Iron,” Separation and Purification Technology, Vol. 64, No. 1, 2008, pp. 26-30. doi:10.1016/j.seppur.2008.08.012
- Y. Mu, H. Q. Yu, J. C. Zheng, S. J. Zhang and G. P. Sheng, “Reductive Degradation of Nitrobenzene in Aqueous Solution by Zero-Valent Iron,” Chemosphere, Vol. 54, No. 7, 2004, pp. 789-794. doi:10.1016/j.chemosphere.2003.10.023
- S. Bang, M. D. Johnson, G. P. Korfiatis and X. Meng, “Chemical Reactions between Arsenic and Zero-Valent Iron in Water,” Water Research, Vol. 39, No. 5, 2005, pp. 763-770. doi:10.1016/j.watres.2004.12.022
- N. P. Nikolaidis, G. M. Dobbs and J. A. Lackovic, “Arsenic Removal by Zero-Valent Iron: Field, Laboratory and Modeling Studies,” Water Research, Vol. 37, No. 6, 2003, pp. 1417-1425. doi:10.1016/S0043-1354(02)00483-9
- J. M. Triszcz, A. Porta and F. G. Einschlag, “Effect of Operating Conditions on Iron Corrosion Rates in Zero-Valent Iron Systems for Arsenic Removal,” Chemical Engineering Journal, Vol. 150, No. 2-3, 2009, pp. 431-439. doi:10.1016/j.cej.2009.01.029
- R. B. Johnston and P. C. Singer, “Redox Reactions in the Fe-As-O2 System,” Chemosphere, Vol. 69, No. 4, 2007, pp. 517-525. doi:10.1016/j.chemosphere.2007.03.036
- C. Su and R. Puls, “Arsenate and Arsenite Removal by Zero Valent Iron: Kinetics, Redox Transformation and Implications for in Situ Groundwater Remediation,” Environmental Science and Technology, Vol. 35, No. 7, 2001, pp. 1487-1492. doi:10.1021/es001607i