Real-Time Modelling and Optimisation for Water and Energy Efficient Surface Irrigation
- 1 Department of Civil Engineering, Mehran University of E & T, Khairpur Campus, Pakistan
- 2 Department of Civil Engineering, Mehran University of E & T, Jamshoro, Pakistan
- 3 Department of Industrial Engineering, Mehran University of E & T, Jamshoro, Pakistan
- 4 Department of Civil Engineering, Mehran University of E & T, Jamshoro, Pakistan
- 5 Department of Civil Engineering, Mehran University of E & T, Khairpur Campus, Pakistan
- 6 Water Resources Division, National Engineering Services, Lahore, Pakistan
- 7 Department of Civil Engineering, Mehran University of E & T, Khairpur Campus, Pakistan
- 8 Faculty of Engineering and Surveying Queensland, USQ Toowoomba, Australia
- 9 Department of Civil Engineering, Mehran University of E & T, Jamshoro, Pakistan
Abstract
The viability and sustainability of crop production is currently threatened by increasing water scarcity. Water scarcity problems can be addressed through improved water productivity and the options usually presumed in this context are efficient water use and conversion of surface irrigation to pressurised systems. By replacing furrow irrigation with drip or centre pivot systems, the water efficiency can be improved by up to 30 % to 45%. However, the installation and application of pumps and pipes, and the associated fuels needed for these alternatives increase energy consumption. A balance between the improvement in water use and the potential increase in energy consumption is required. When surface water is used, pressurised irrigation systems increase energy consumption substantially, by between 65% to 75%, and produce greenhouse gas emissions around 1.75 times higher than that of gravity based irrigation systems so their use should be carefully planned keeping in view adverse impact of carbon emissions on the environment and threat of increasing energy prices. With gravity-fed surface irrigation methods, the energy consumption is assumed to be negligible. This study has shown that a novel real-time infiltration model REIP has enabled implementation of real-time optimisation and gravity fed surface irrigation with real-time optimisation has potential to bring significant improvements in irrigation performance along with substantial water savings of 2.92 ML/ha which is equivalent to that given by pressurised systems. The real-time optimisation and control thus offers a modern, environment friendly and water efficient system with close to zero increase in energy consumption and minimal greenhouse gas emissions.
- E. Playan and L. Mateos, “Modernization and Optimization of Irrigation Systems to Increase Water Productivity,” Agricultural Water Management, Vol. 80, No. 1-3, 2006, pp. 100-116. doi:10.1016/j.agwat.2005.07.007
- A. J. B. Zehnder, H. Yang and R. Schertenlieb, “Water Issues: The Need for Action at Different Levels,” Aquatic Sciences, Vol. 65, No. 1, 2003, pp. 1-20. doi:10.1007/s000270300000
- Pratt Water, “The Business of Saving Water,” The Report of the Murrumbidgee Valley Water Efficiency Feasibility Project, Campbellfield, Victoria, 2004.
- R. L. Naylor, “Energy and Resource Constraints on Intensive Agricultural Production,” Annual Review of Energy and the Environment, Vol. 21, 1996, pp. 99-123. doi:10.1146/annurev.energy.21.1.99
- D. Pimentel, “Energy Inputs in Production Agriculture,” In: R. C. Fluck, Ed., Energy in Farm Production, Elsevier, Amsterdam, 1992. doi:10.1016/B978-0-444-88681-1.50007-7
- A. W. Hodges, G. D. Lynne, M. Rahmani and C. F. Casey, “Adoption of Energy and Water-Conserving Irrigation Technologies in Florida,” University of Florida Report, Florida, 1994.
- H. Singh, D. Mishra and N. M. Nahar, “Energy Use Pattern in Production Agriculture of a Typical Village in Arid Zone, India, Part I,” Energy Conversion and Management, Vol. 43, No. 16, 2002 pp. 2275-2286. doi:10.1016/S0196-8904(01)00161-3
- R. Lal, “Carbon Emission from Farm Operations,” Environment International, Vol. 30, No. 7, 2004, pp. 981-990. doi:10.1016/j.envint.2004.03.005
- B. A. Stout, “Handbook of Energy for World Agriculture,” Elsevier Science Publishers Ltd., Essex, 1990. doi:10.1007/978-94-009-0745-4
- K. L. Khatri and R. J. Smith, “Real-Time Prediction of Soil Infiltration Characteristics for Management of Furrow Irrigation,” Irrigation Science, Vol. 25, No. 1, 2006, pp. 33-43. doi:10.1007/s00271-006-0032-1
- D. Anthony, “On-Farm Water Productivity, Current and Potential: Options, Outcomes, Costs,” Irrigation Australia, Vol. 10, No. 1, 1995, pp. 20-23.
- R. J. Smith, S. R. Raine and J. Minkovich, “Irrigation Application Efficiency and Deep Drainage Potential under Surface Irrigated Cotton,” Agricultural Water Management, Vol. 71, No. 2, 2005, pp. 117-130. doi:10.1016/j.agwat.2004.07.008
- S. R. Raine, D. J. McClymont and R. J. Smith, “The Development of Guidelines for Surface Irrigation in Areas with Variable Infiltration,” Proceedings of Australian Society of Sugarcane Technologists, Vol. 1, No. 1, 1997, pp. 293-301.