Research ArticleOpen AccessGoogle Scholar indexed
N-Removal on Wastewater Treatment Plants: A Process Control Approach
- 1
- 2
- 3
Journal of Water Resource and Protection·Volume 03 (2011)·Pages 1–11·Published 29 January 2011·DOI10.4236/jwarp.2011.31001
Copy link · social · email
Abstract
A multilayered control design approach is proposed here. Starting with the Dissolved Oxygen (DO) control loop in the last aerated tank, the control of the recirculation sludge is added next. Once the limitations of this two-loop control strategy are highlighted, a cascade control loop is proposed. This cascade control is further enhanced by a feed-forward control action that makes use of influent ammonia concentration. The resulting cascade+feedforward control configuration achieves satisfactory nitrogen removal for the three influent operating conditions (dry, rain and storm.)
KeywordsWastewater Process ControlNitrogen RemovalPID Control
- J. F. Andrews, “Dynamic Models and Control Strategies for Wastewater Treatment Processes,” Water Research, Vol. 8, 1974, pp. 261-289. doi:10.1016/0043-1354(74)90090-6
- P. Vanrolleghem, “On-Line Modelling of Activated Slu- dge Processes: Development of an Adaptive Sensor,” Thesis from the University of Gent, Belgium, 1994.
- L. J. S. Lukasse, K. J. Keesman and G. van Straten, “A Recursively Identified Model for the Short-Term Predictions of NH4/NO3 Concentrations in Alternating Activated Sludge Processes,” Journal of Process Control, Vol. 9, 1999, pp. 87-100. doi:10.1016/S0959-1524(98)00037-7
- J. F. Andrews, “Dynamic Control of Wastewater Trement Plants,” Environmental Science Technology, Vol. 28, 1994, pp. 434-440. doi:10.1021/es00058a004
- D. Vrecko, N. Hvala, and B. Carlsson, “Feedforward- Feedback Control of an Activated Sludge Process: A Simulation Study,” Water Science Technology, Vol. 47, No. 12, 2003, pp. 19-26.
- P. Ingildsen, “Realising Full-Scale Control in Wastewater Treatment Systems Using in Situ Nutrient Sensors,” Ph.D. Thesis, Department of Industrial Electrical Engineering and Automation, Lund University, Sweden, 2002.
- A. Stare, D. Vrecko and N. Hvala, “Comparison of Control Strategies for Nitrogen Removal in an Activated Sludge Process in Terms of Operating Costs: A Simulation Study,” Journal of Process Control, Vol. 41, 2007, pp. 2004-2014.
- N. A. Wahab, R. Katebi and J. Balderud, “Multivariable Pid Control Design for Activated Sludge Process with Nitrification and Denitrification,” Biochemical Engneering Journal, Vol. 45, No. 3, 2009, pp. 239-248. doi:10.1016/j.bej.2009.04.016
- Z. Yuan, A. Oehmen and P. Ingildsen, “Control of Nitrate Recirculation Flow in Predenitrification Systems,” Water Science and Technology, Vol. 45, No. 4-5, 2002, pp. 29- 36.
- P. R. Barros and B. Carlsson, “Iterative Design of a Nitrate Controller Using an External Carbon Source in an Activated Sludge Process,” Water Science and Technology, Vol. 37, No. 12, 1998, pp. 95-102. doi:10.1016/S0273-1223(98)00341-2
- M. Steffens and P. Lant, “Multivariable Control of Nutrient Removing Activated Sludge Systems,” Water Research, Vol. 33, 1999, pp. 2864-2878. doi:10.1016/S0043-1354(98)00521-1
- J. Copp, “IWA Task Group on Benchmarking of Control Strategies for WWTPs.” http://www.benchmarkwwtp.org/
- M. Henze, W. Gujer, M. C. van Loosdrecht and T. Mino, “Activated Sludge Models ASM1, ASM2, ASM2d and ASM3,” IAWQ Scientific and Technical Report No. 3, IAWQ, Great Britain, 2000.