In this study, nano-TiO 2 particles were synthesized by sol-gel method. The synthesized nanoparticles were characterized by Fourier Transform Infrared (FT-IR), X-ray diffraction (XRD), Transmission electron microscope (TEM) and Brunauer-Emmett-Teller (BET). The results showed that the average size of TiO 2 nanoparticles and their specific surface area were 21.1 nanometer and 55.35 m 2 /gr, respectively. The effects of several variables such as adsorbent weight, pH and contact time on lead ions adsorption were studied in batch experiments and finally the optimum conditions for lead ions adsorption by synthesized nano-TiO 2 were obtained. The results showed that the synthesized nano TiO 2 had a good capacity to adsorb lead ion. The kinetic data were described by pseudo-first and second-order models. Freundlich and Langmuir isotherm models were used for the analysis of equilibrium data, and results showed that the Langmuir model was suitable for describing the equilibrium data of lead ion adsorption by nano TiO 2 . Using the Langmuir isotherm, the maximum sorption capacity of Pb 2+ was estimated to be 7.41 (mg/g) at 25 ° C.
Sounthararajah, D. P., Loganathan, P., Kandasamy, J. and Vigneswaran, S. (2015) Adsorptive Removal of Heavy Metals from Water Using Sodium Titanate Nanofibres Loaded onto GAC in Fixed-Bed Columns. Journal of Hazardous Materials, 287, 306-316. http://dx.doi.org/10.1016/j.jhazmat.2015.01.067
Zhang, D., Zhang, C.L. and Zhou, P. (2011) Preparation of Porous Nano-Calcium Titanate Microspheres and Its Adsorption Behavior for Heavy Metal Ion in Water. Journal of Hazardous Materials, 186, 971-977. http://dx.doi.org/10.1016/j.jhazmat.2010.11.096
Razzaz, A., Ghorban, S., Hosayni, L., Irani, M. and Aliabadi, M. (2016) Chitosan Nanofibers Functionalized by TiO2 Nanoparticles for the Removal of Heavy Metal Ions. Journal of the Taiwan Institute of Chemical Engineers, 58, 333-343. http://dx.doi.org/10.1016/j.jtice.2015.06.003
Rahmani, A., Mousavi, H.Z. and Fazli, M. (2010) Effect of Nanostructure Alumina on Adsorption of Heavy Metals. Desalination, 253, 94-100. http://dx.doi.org/10.1016/j.desal.2009.11.027
Poursani, A. S., Nilchi, A., Hassani, A.H., Shariat, M. and Nouri, J. (2015) A Novel Method for Synthesis of Nano-γ-Al2O3: Study of Adsorption Behavior of Chromium, Nickel, Cadmium and Lead Ions. International Journal of Environmental Science and Technology, 12, 2003-2014. http://dx.doi.org/10.1007/s13762-014-0740-7
Mahapatra, A., Mishra, B.G. and Hota, G. (2013) Electrospun Fe2O3-Al2O3 Nanocomposite Fibers as Efficient Adsorbent for Removal of Heavy Metal Ions from Aqueous Solution. Journal of hazardous Materials, 258-259, 116-123. http://dx.doi.org/10.1016/j.jhazmat.2013.04.045
Nilchi, A., Dehaghan, T.S. and Garmarodi, S.R. (2013) Kinetics, Isotherm and Thermodynamics for Uranium and Thorium Ions Adsorption from Aqueous Solutions by Crystalline tin Oxide Nanoparticles. Desalination, 321, 67-71. http://dx.doi.org/10.1016/j.desal.2012.06.022
Bailey, S.E., Olin, T. J., Bricka, R.M. and Adrian, D.D. (1999) A Review of Potentially Low-Cost Sorbents for Heavy Metals. Water Research, 33, 2469-2479. http://dx.doi.org/10.1016/S0043-1354(98)00475-8
Pourreza, N., Rastegarzadeh, S. and Larki, A. (2014) Simultaneous Preconcentration of Cd(II), Cu(II) and Pb(II) on Nano-TiO2 Modified with 2-Mercaptobenzothiazole Prior to Flame Atomic Absorption Spectrometric Determination. Journal of Industrial and Engineering Chemistry, 20, 2680-2686. http://dx.doi.org/10.1016/j.jiec.2013.10.055
Wang, Y.H., Lan, Y. and Huang, C. B. (2008) Adsorption Behavior of Pb and Cd Ions on Bauxite Flotation Tailings. Journal of Central South University of Technology, 2, 183-187. http://dx.doi.org/10.1007/s11771-008-0035-6
Kocabas-Atakli, Z.Ö. and Yürüm, Y. (2013) Synthesis and Characterization of Anatase Nanoadsorbent and Application in Removal of Lead, Copper and Arsenic from Water. Chemical Engineering Journal, 225, 625-635. http://dx.doi.org/10.1016/j.cej.2013.03.106
Samadi, S., Khalilian, F. and Tabatabaee, A. (2014) Synthesis, Characterization and Application of Cu-TiO2/Chitosan Nanocomposite Thin Film for the Removal of Some Heavy Metals from Aquatic Media. Journal of Nanostructure in Chemistry, 4, 1-8. http://dx.doi.org/10.1007/s40097-014-0084-3
Sreekantan, S., Zaki, S.M., Lai, C.W. and Tzu, T.W. (2014) Copper-Incorporated Titania Nanotubes for Effective Lead Ion Removal. Materials Science in Semiconductor Processing, 26, 620-631. http://dx.doi.org/10.1016/j.mssp.2014.05.034
Li, Y., Cao, L., Li, L. and Yang, C. (2015) In Situ Growing Directional Spindle TiO2 Nanocrystals on Cellulose Fibers for Enhanced Pb2+ Adsorption from Water. Journal of Hazardous Materials, 289, 140-148. http://dx.doi.org/10.1016/j.jhazmat.2015.02.051
Li, X., Liu, W. and Ni, J. (2015) Short-Cut Synthesis of Tri-Titanate Nanotubes Using Nano-Anatase: Mechanism and Application as an Excellent Adsorbent. Microporous and Mesoporous Materials, 213, 40-47. http://dx.doi.org/10.1016/j.micromeso.2015.04.018
Chandramouli, V., Anthonysamy, S., Rao, P.V., Divakar, R. and Sundararaman, D. (1996) PVA Aided Microwave Synthesis: A Novel Route for the Production of Nanocrystalline Thoria Powder. Journal of Nuclear Materials, 231, 213-220.
Chandramouli, V., Anthonysamy, S., Rao, P.V., Divakar, R. and Sundararaman, D. (1996) PVA Aided Microwave Synthesis: A Novel Route for the Production of Nanocrystalline Thoria Powder. Journal of Nuclear Materials, 231, 213-220. http://dx.doi.org/10.1016/0022-3115(96)00368-6
Villarroel-Rocha, J., Barrera, D. and Sapag, K. (2014) Introducing a Self-Consistent Test and the Corresponding Modification in the Barrett, Joyner and Halenda Method for Pore-Size Determination. Microporous and Mesoporous Materials, 200, 68-78. http://dx.doi.org/10.1016/j.micromeso.2014.08.017
Asencios, Y.J. and Sun-Kou, M.R. (2012) Synthesis of High-Surface-Area γ-Al2O3 from Aluminum Scrap and Its Use for the Adsorption of Metals: Pb (II), Cd (II) and Zn (II). Applied Surface Science, 258, 10002-10011. http://dx.doi.org/10.1016/j.apsusc.2012.06.063
Sen, T.K. and Sarzali, M.V. (2008) Removal of Cadmium Metal Ion (Cd2+) from Its Aqueous Solution by Aluminium Oxide (Al2O3): A Kinetic and Equilibrium Study. Chemical Engineering Journal, 142, 256-262. http://dx.doi.org/10.1016/j.cej.2007.12.001
Li, Y., Cao, L., Li, L. and Yang, C. (2015) In Situ Growing Directional Spindle TiO2 Nanocrystals on Cellulose Fibers for Enhanced Pb2+ Adsorption from Water. Journal of Hazardous Materials, 289, 140-148. http://dx.doi.org/10.1016/j.jhazmat.2015.02.051
Aksu, Z. (2002) Determination of the Equilibrium, Kinetic and Thermodynamic Parameters of the Batch Biosorption of Nickel (II) Ions onto Chlorella vulgaris. Process Biochemistry, 38, 89-99. http://dx.doi.org/10.1016/S0032-9592(02)00051-1
Langmuir, I. (1916) Theconstitution and Fundamental Properties of Solids and Liquids. PART I. SOLIDS. Journal of the American Chemical Society, 38, 2221-2295. http://dx.doi.org/10.1021/ja02268a002
El-Kamash, A.M. (2008) Evaluation of Zeolite A for the Sorptive Removal of Cs+ and Sr2+ Ions from Aqueous Solutions Using Batch and Fixed Bed Column Operations. Journal of Hazardous Materials, 151, 432-445. http://dx.doi.org/10.1016/j.jhazmat.2007.06.009
Shiri-Yekta, Z., Yaftian, M.R. and Nilchi, A. (2013) Silica Nanoparticles Modified with a Schiff Base Ligand: An Efficient Adsorbent for Th(IV), U (VI) and Eu(III) Ions. Korean Journal of Chemical Engineering, 30, 1644-1651. http://dx.doi.org/10.1007/s11814-013-0077-9
Sis, H. and Uysal, T. (2014) Removal of Heavy Metal Ions from Aqueous Medium Using Kuluncak (Malatya) Vermiculites and Effect of Precipitation on Removal. Applied Clay Science, 95, 1-8. http://dx.doi.org/10.1016/j.clay.2014.03.018