Preparation and Application of Polymer Silicate Phosphate Ferric Sulfate Used in High-Viscosity Oil Refining Wastewater Treatment
- 1
- 2
- 3
Abstract
A new kind of flocculants, named Polymer Silicate Phosphate Ferric Sulfate(PSPFS), was synthesized by ferrous sulfate used as the main material and activated silicic acid as additive. In this paper, High-Viscosity Oil Refining wastewater from Liaohe Petrochemical Corporation was the treatment object. Overall, the in-fluencing factors and synthesis technology conditions of PSPFS were determined by experiments. First of all, the conditions of influencing factors were showed as follows: the mass percent concentration of ferrous sulfate 55%,concentration of sodium silicate 15% , the molar ratio of ferrous sulfate and hydrogen peroxide 1.2：1, oxidation temperature 40 degree Celsius, oxidation time 4 hours, polymerization temperature 60 de-gree Celsius and polymerization time 2 hours. Secondly, the optimal ratios of components were determined by uniform design method. The molar ratio of Fe/Si is 5.0：1, Fe/H2SO4 is 3.2：1, and Fe/P is 18.0：1. At last, the optimal experimental condition was determined as follows: the dosing quantity 200mg/L, pH value 5.5～9, temperature 25～45℃, stirring time 2 min, and standing time 3 min, according to the result of floc-culation experiments with PSPFS. Besides, the result of the comparative experiments showed that the effi-ciency of PSPFS was much better than the reference flocculants.
- R. Zhang, “The technology of heavy oil thermal recovery,” Beijing: Petroleum industry press, 1999.
- H. Y. Hao, ZW Cui, and H. Y. Hao, “Studies and applications of flocculants in water treatment,” Journal of North China Institute of Technology, No. 2, pp. 137–140, 1999.
- X. Y. Xu and N. N Gu, “Screening and domestication of microorganism used in oil contaminated wastewater remediation [J],” Journal of Northeastern University: Natural Science, No. 5, pp. 721–724, 2007.
- X. Y. Xu and N. N. Gu, “Chemical embedding immobilization technique of microorganism used in oil contaminated wastewater remediation,” Transaction of NEU, No. 9, pp. 1329–1332, 2007.
- B. Y. Gao, H. H. Hahn, and E. Hoffmann. “Evaluation of aluminum-silicate polymer composite as a coagulant for water treatment,” Water Research, Vol. 36, No. 14, pp. 3573–3581, 2002.
- A. K. Arnold-Smith and R. M. Christie, “Polyaluminum silicate sulfate-A New coagulant for potable and wastewater treatment,” Proc of the 5th Gothenburg Symposium, France, 1992.
- B. Y. Gao, Q. Y. Yue, and B. J. Wang, “Poly-aluminum–silicate-chloride (PASiC)-A new type of composite inorganic polymer coagulant,” Colloids and Surfaces A: PHysicochemical and Engineering Aspects, vol. 229, No. 1–3, pp. 121–127, 2003.
- L. J. Li, “Preparation of polymer silicate phosphate ferrous sulfate and its applicant on high-viscosity oil refining wastewater treatment [D],” Northeastern University, 2004.