Study of the Diffusion Behavior of Seawater Absorption in Multi-Walled Carbon Nanotubes/Halloysite Nanotubes Hybrid Nanofillers Modified Epoxy-Based Glass/Carbon Fiber Composites
- 1 Department of Mechanical Engineering, Sanjay Ghodawat University, Atigre, Kolhapur, Maharashtra, India
- 2 Department of Mechanical Engineering, Sanjay Ghodawat University, Atigre, Kolhapur, Maharashtra, India
- 3 Department of Mechanical Engineering, Sanjay Ghodawat University, Atigre, Kolhapur, Maharashtra, India
Abstract
In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.
- Selvaraju, S. and Ilaiyavel, S. (2011) Applications of Composites in Marine Industry. Journal of Engineering Research, No. 2, 89-91.
- Rubino, F., Nisticò, A., Tucci, F. and Carlone, P. (2020) Marine Application of Fiber Reinforced Composites: A Review. Journal of Marine Science and Engineering, 8, Article 26. https://doi.org/10.3390/jmse8010026
- Rajak, D., Pagar, D., Menezes, P. and Linul, E. (2019) Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers, 11, Article 1667. https://doi.org/10.3390/polym11101667
- Rodríguez-González, J.A. and Rubio-González, C. (2021) Seawater Effects on Interlaminar Fracture Toughness of Glass Fiber/Epoxy Laminates Modified with Multiwall Carbon Nanotubes. Journal of Composite Materials, 55, 387-400. https://doi.org/10.1177/0021998320950788
- Mansouri, L., Djebbar, A., Khatir, S. and Abdel Wahab, M. (2019) Effect of Hygrothermal Aging in Distilled and Saline Water on the Mechanical Behaviour of Mixed Short Fibre/Woven Composites. Composite Structures, 207, 816-825. https://doi.org/10.1016/j.compstruct.2018.09.067
- Ulus, H., Kaybal, H.B., Eskizeybek, V. and Avcı, A. (2020) Halloysite Nanotube Reinforcement Endows Ameliorated Fracture Resistance of Seawater Aged Basalt/Epoxy Composites. Journal of Composite Materials, 54, 2761-2779. https://doi.org/10.1177/0021998320902821
- Jesthi, D.K. and Nayak, R.K. (2019) Improvement of Mechanical Properties of Hybrid Composites through Interply Rearrangement of Glass and Carbon Woven Fabrics for Marine Application. Composites Part B: Engineering, 168, 467-475. https://doi.org/10.1016/j.compositesb.2019.03.042
- Coleman, J.N., Khan, U., Blau, W.J. and Gun’Ko, Y.K. (2006) Small But Strong: A Review of the Mechanical Properties of Carbon Nanotube-Polymer Composites. Carbon, 44, 1624-1652. https://doi.org/10.1016/j.carbon.2006.02.038
- Nurazzi, N.M., et al. (2021) Mechanical Performance and Applications of CNTs Reinforced Polymer Composites—A Review. Nanomaterials, 11, Article 2186. https://doi.org/10.3390/nano11092186
- Viet, N.V., Wang, Q. and Kuo, W.S. (2016) Effective Young’s Modulus of Carbon Nanotube/Epoxy Composites. Composites Part B: Engineering, 94, 160-166. https://doi.org/10.1016/j.compositesb.2016.03.060
- Sasidharan, S. and Anand, A. (2020) Epoxy-Based Hybrid Structural Composites with Nanofillers: A Review. Industrial & Engineering Chemistry Research, 59, 12617-12631. https://doi.org/10.1021/acs.iecr.0c01711