Investigation of Hot Formability of AZ61 Mg Alloy
- 1 Department of Mechanical Engineering, Auckland University of Technology, Auckland, New Zealand
- 2 Department of Mechanical Engineering, Auckland University of Technology, Auckland, New Zealand
Abstract
High temperature mechanical properties and formability of the AZ61 magnesium alloy are evalu-ated in this paper. Tensile tests were conducted to obtain the formability parameters at elevated temperatures of up to 400 ℃ . The results showed that at higher temperature, yield strength and ultimate tensile strength of the material decrease significantly, while the material experiences an increase in ductility (maximum elongation before break). A model has been created in finite ele-ment software Abaqus to further study the deep drawability of the AZ61 Mg alloy. Effects of dif-ferent process parameters such as punch and die geometry, forming speed and temperature as well as blank-holder force on square cup drawing of the AZ61 alloy were investigated and optimum process parameters are obtained which can be used as a design guide in sheet metal forming industry.
- Jiang, M.G., Yan, H. and Chen, R.S. (2015) Enhanced Mechanical Properties Due to Grain Refinement and Texture Modification in an AZ61 Mg Alloy Processed by Small Strain Impact Forging. Materials Science and Engineering A, 621, 204-211. http://dx.doi.org/10.1016/j.msea.2014.10.075
- Li, J.T., Xu, G.M., Yu, H.L., Deng, G.Y., Su, L.H., Lu, C., He, L.Z., Godbole, A. and Li, H.J. (2014) Optimization of Process Parameters in Twin-Roll Strip Casting of an AZ61 Alloy by Experiments and Simulations. International Journal of Advanced Manufacturing Technology, 76, 1769-1781. http://dx.doi.org/10.1007/s00170-014-6312-7
- Hlavácová, I., Palcek, P., Chalupová, M. and Dresslerová, Z. (2013) Plastic Deformation Properties of Magnesium Alloy AZ61. Manufacturing Technology, 13, 313-319.
- Park, J.S. and Kim, J.M. (2013) Texture Development and Mechanical Behaviors of Extruded AZ61 Magnesium Alloys. Advanced Science Letters, 19, 705-709.
- Wu, H.-Y., Wu, C.-T., Yang, J.-C. and Lin, M.-J. (2014) Hot Workability Analysis of AZ61 Mg Alloys with Processing Maps. Materials Science and Engineering A, 607, 261-268. http://dx.doi.org/10.1016/j.msea.2014.04.017
- Liao, C., Wu, H., Wu, C., Zhu, F. and Lee, S. (2014) Hot Deformation Behavior and Flow Stress Modeling of Annealed AZ61 mg Alloys. Progress in Natural Science: Materials International, 24, 253-265. http://dx.doi.org/10.1016/j.pnsc.2014.04.006
- Olguín-González, M.L., Hernández-Silva, D., García-Bernal, M.A. and Sauce-Rangel, V.M. (2014) Hot Deformation Behavior of Hot-Rolled AZ31 and AZ61 Magnesium Alloys. Materials Science and Engineering A, 597, 82-88. http://dx.doi.org/10.1016/j.msea.2013.12.027
- Tsao, L.C., Huang, Y.-T. and Fan, K.-H. (2014) Flow Stress Behavior of AZ61 Magnesium Alloy during Hot Compression Deformation. Materials and Design, 53, 865-869. http://dx.doi.org/10.1016/j.matdes.2013.07.023
- Shin, K.-H., Lee, Y.-S. and Kim, H.S. (2014) The Flow Behavior Modeling of AZ61 Magnesium Alloy at Elevated Temperatures Considering the Effects of Strain Rate and Grain Size. International Journal of Precision Engineering and Manufacturing, 15, 745-751. http://dx.doi.org/10.1007/s12541-014-0395-9
- Liao, C.-H., Wu, H.-Y., Lee, S., Wu, C.-T. and Chiu, C.-H. (2013) Processing Map for Hot Deformation of Homogenized AZ61 Mg Alloy. Advanced Materials Research, 716, 240-243. http://dx.doi.org/10.4028/www.scientific.net/AMR.716.240
- Geranmayeh, A.R., Mahmudi, R., Movahedi-Rad, A. and Malekoshoaraei, M.H. (2012) High-Temperature Mechanical Properties of AZ61 and AZ61-0.7Si Magnesium Alloys. Kovove Materialy, 50, 393-397.