The underactuated fingers used in numerous robotic systems are evaluated by grasping force, configuration space, actuation method, precision of operation, compactness and weight. In consideration of all such factors a novel linkage based underactuated finger with a self-adaptive actuation mechanism is proposed to be used in prosthetics hands, where the finger can accomplish flexion and extension. Notably, the proposed mechanism can be characterized as a combination of parallel and series links. The mobility of the system has been analyzed according to the Chebychev-Grübler-Kutzbach criterion for a planar mechanism. With the intention of verifying the effectiveness of the mechanism, kinematics analysis has been carried out, by means of the geometric representation and Denavit-Hartenberg (D-H) parameter approach. The presented two-step analysis followed by a numerical study, eliminates the limitations of the D-H conversion method to analyze the robotics systems with both series and parallel links. In addition, the trajectories and configuration space of the proposed finger mechanism have been determined by the motion simulations. A prototype of the proposed finger mechanism has been fabricated using 3D printing and it has been experimentally tested to validate its functionality. The kinematic analysis, motion simulations, experimental investigations and finite element analysis have demonstrated the effectiveness of the proposed mechanism to gain the expected motions.
Wu, L.C., Kong, Y.X. and Li, X.L. (2016) A Fully Rotational Joint Underactuated Finger Mechanism and its Kinematics Analysis. International Journal of Advanced Robotic Systems, 13, 1-9. https://doi.org/10.1177/1729881416663373
Phlernjai, M., Takayama, T. and Omata, T. (2016) Passively Switched Cable-Driven Transmission for High-Speed/High-Force Robot Finger. Advanced Robotics, 30, 1559-1570. https://doi.org/10.1080/01691864.2016.1251336
Rossi, C. and Savino, S. (2013) Mechanical Model of A Single Tendon Finger. AIP Conference Proceedings, 1558, 1286-1292. https://doi.org/10.1063/1.4825746
Bandara, D.S.V., Gopura, R.A.R.C., Brunthavan, G.K.M. and Abeynayake, H.I.M.M. (2014) An Under-Actuated Mechanism for A Robotic Finger. Proceedings of the 4th Annual IEEE International Conference on Cyber Technology in Automation Control and Intelligent Systems, Hong Kong, 407-412. https://doi.org/10.1109/CYBER.2014.6917498
Liu, H., Meusel, P., Hirzinger, G., Jin, M., Liu, Y. and Xie, Z. (2008) The Modular Multisensory DLR-HIT-Hand: Hardware and Software Architecture. IEEE/ASME Transactions on Mechatronics, 13, 461-469. https://doi.org/10.1109/TMECH.2008.2000826
Koganezawa, K. and Ishizuka, Y. (2008) Novel Mechanism of Artificial Finger Using Double Planetary Gear System. Proceedings of the 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, Nice, 3184-3191. https://doi.org/10.1109/IROS.2008.4650589
Kamikawa, Y. and Maeno, T. (2008) Underactuated Five-Finger Prosthetic Hand Inspired by Grasping Force Distribution of Humans. Proceedings of the 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, Nice, 717-722. https://doi.org/10.1109/IROS.2008.4650628
Gaiser, I.N., Pylatiuk, C., Schulz, S., Kargov, A., Oberle, R. and Werner, T. (2009) The FLUIDHAND III: A Multifunctional Prosthetic Hand. Journal of Prosthetics and Orthotics, 21, 91-96. https://doi.org/10.1097/JPO.0b013e3181a1ca54
Wu, L., Carbone, G. and Ceccarelli, M. (2009) Designing an Underactuated Mechanism for a 1 Active DOF Finger Operation. Mechanism and Machine Theory, 44, 336-348. https://doi.org/10.1016/j.mechmachtheory.2008.03.011
Dalley, S.A., Bennett, D.A. and Goldfarb, M. (2014) Functional Assessment of the Vanderbilt Multigrasp Myoelectric Hand: A Continuing Case Study. Proceedings of the 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Chicago, 6195-6198. https://doi.org/10.1109/EMBC.2014.6945044
Choi, K.Y., Akhtar, A. and Bretl, T. (2017) A Compliant Four-Bar Linkage Mechanism that Makes the Fingers of a Prosthetic Hand More Impact Resistant. Proceedings of the 2017 IEEE International Conference on Robotics and Automation, Singapore, 6694-6699. https://doi.org/10.1109/ICRA.2017.7989791
Resnik, L., Klinger, S.L. and Etter, K. (2014) The DEKA Arm: Its Features, Functionality, and Evolution during the Veterans Affairs Study to Optimize the DEKA Arm. Prosthetics and Orthotics International, 38, 492-504. https://doi.org/10.1177/0309364613506913
Ceccarelli, M. (2004) Fundamentals of Mechanics of Robotic Manipulation. Springer Science & Business Media, Berlin. https://doi.org/10.1007/978-1-4020-2110-7
Li, G., Zhang, C., Zhang, W., Sun, Z. and Chen, Q. (2014) Coupled and Self-Adaptive Under-Actuated Finger with a Novel S-Coupled and Secondly Self-Adaptive Mechanism. Journal of Mechanisms and Robotics, 6, 1-10. https://doi.org/10.1115/1.4027704
Belzile, B. and Birglen, L. (2017) Optimal Design of Self-Adaptive Fingers for Proprioceptive Tactile Sensing. Journal of Mechanisms and Robotics, 9, 1-11. https://doi.org/10.1115/1.4037113
Yang, Y., Chen, Y., Wei, Y. and Li, Y. (2016) Novel Design and Three-Dimensional Printing of Variable Stiffness Robotic Grippers. Journal of Mechanisms and Robotics, 8, 1-15. https://doi.org/10.1115/1.4033728
Gogu, G. (2005) Chebychev-Grübler-Kutzbach’s Criterion for Mobility Calculation of Multi-Loop Mechanisms Revisited via Theory of Linear Transformations. European Journal of Mechanics—A/Solids, 24, 427-441. https://doi.org/10.1016/j.euromechsol.2004.12.003
Dai, J.S., Huang, Z. and Lipkin, H. (2004) Mobility of Overconstrained Parallel Mechanisms. Journal of Mechanical Design, 128, 220-229. https://doi.org/10.1115/1.1901708
Chen, F.C., Appendino, S., Battezzato, A., Favetto, A., Mousavi, M. and Pescarmona, F. (2014) Human Finger Kinematics and Dynamics. New Advances in Mechanisms Transmissions and Applications, Springer, Berlin, 115-122. https://doi.org/10.1007/978-94-007-7485-8_15
Hunt, K.H., Samuel, A.E. and McAree, P.R. (1991) Special Configurations of Multi-Finger Multi-Freedom Grippers-A Kinematic Study. The International Journal of Robotics Research, 10, 123-134. https://doi.org/10.1177/027836499101000204
Rocha, C., Tonetto, C. and Dias, A. (2011) A Comparison between the Denavit-Hartenberg and the Screw-Based Methods Used in Kinematic Modeling of Robot Manipulators. Robotics and Computer-Integrated Manufacturing, 27, 723-728. https://doi.org/10.1016/j.rcim.2010.12.009
Corke, P.I. (2007) A Simple and Systematic Approach to Assigning Denavit-Hartenberg Parameters. IEEE Transactions on Robotics, 23, 590-594. https://doi.org/10.1109/TRO.2007.896765
Singh, S., Singla, A., Singh, A., Soni, S. and Verma, S. (2016) Kinematic Modelling of a Five-DoFs Spatial Manipulator Used in Robot-Assisted Surgery. Perspectives in Science, 8, 550-553. https://doi.org/10.1016/j.pisc.2016.06.017
Dupuis, J., Holst, C. and Kuhlmann, H. (2017) Improving The Kinematic Calibration of a Coordinate Measuring Arm Using Configuration Analysis. Precision Engineering, 50, 171-182. https://doi.org/10.1016/j.precisioneng.2017.05.004
Du, Z., Yang, W. and Dong, W. (2015) Kinematics Modeling of a Notched Continuum Manipulator. Journal of Mechanisms and Robotics, 7, 1-9. https://doi.org/10.1115/1.4028935
Boscariol, P., Gasparetto, A., Scalera, L. and Vidoni, R. (2017) Efficient Closed-Form Solution of the Kinematics of a Tunnel Digging Machine. Journal of Mechanisms and Robotics, 9, 1-13. https://doi.org/10.1115/1.4035797
Li, J., Yu, L.D., Sun, J.Q. and Xia, H.J. (2013) A Kinematic Model for Parallel-Joint Coordinate Measuring Machine. Journal of Mechanisms and Robotics, 5, 1-4. https://doi.org/10.1115/1.4025121
Lipkin, H. (2005) A Note on Denavit-Hartenberg Notation in Robotics. Proc. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Long Beach, 24-28 September 2005, 921-926. https://doi.org/10.1115/DETC2005-85460
Herath, H.M.C.M., Gopura, R.A.R.C. and Lalitharatne, T.D. (2017) Prosthetic Hand with a Linkage Finger Mechanism for Power Grasping Applications. IEEE Life Sciences Conference, Sydney, 304-307. https://doi.org/10.1109/LSC.2017.8268203
Gopura, R.A.R.C., Bandara, D.S.V., Gunasekera, N.P.A., Hapuarachchi, V.H and Ariyarathna, B.S. (2017) A Prosthetic Hand with Self-Adaptive Fingers. 3rd International Conference on Control, Automation and Robotics, Nagoya, 269-274. https://doi.org/10.1109/ICCAR.2017.7942701
Abeysekera, J. and Sha, H. (1987) Body Size Data of Sri Lankan Workers and Their Variability with Other Populations in the World: Its Impact on the Use of Imported Goods. Journal of Human Ergology, 16, 193-208.
Tomancak, P., Rueden, C. and Tinevez, J. (2007) Fiji ImageJ Open Source Java Image Processing Program. http://imagej.net