The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
- 1 Department of Mechanical Engineering, Faculty of Engineering, Edo University, Iyamho, Nigeria
- 2 Department of Mechanical Engineering, College of Technology, Federal University of Petroleum Resources, Effurun (FUPRE), Effurun, Nigeria
- 3 Department of Mechanical Engineering, College of Technology, Federal University of Petroleum Resources, Effurun (FUPRE), Effurun, Nigeria
Abstract
3D printing can spur manufacturing rebirth in Nigeria and the World in general. There are many areas where 3D printing is creating significant change, particularly in designing and prototyping of new products, in the arts, and in visualizing abstract concepts. This is a step change from conventional manufacturing processes to rapid prototyping and layer manufacturing. This report has defined rapid prototyping, rapid manufacturing and the current technologies available to fabricate 3D components. In addition to this, it provides a brief overview of the current contributions of the Edo University Iyamho (EUI) in collaboration with the Federal University of Petroleum Resources, to sustain manufacturing research initiatives towards the development of locally fabricated 3D printer and the possible future Additive Manufacturing in Nigeria. It is anticipated that this work will benefit the Nigerian academic, research institutes, industries, thus, enhance the GDP contribution of the manufacturing sector in Nigeria.
- Page, T. (2011) Design for Additive Manufacturing.
- Bayley, C., et al. (2014) Understanding Error Generation in Fused Deposition Modeling. Proceedings of the ASPE Spring Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing, Berkeley, 13-16 April 2014.
- Levy, G.N., Schindel, R. and Kruth, J.-P. (2003) Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives. Cirp Annals-Manufacturing Technology, 52, 589-609. https://doi.org/10.1016/S0007-8506(07)60206-6
- Schmid, R. and Kalpakjian, S. (2006) Manufacturing Engineering and Technology. Pearson Prentice Hall, Upper Saddle River.
- Udroiu, R. and Ivan, N. (2008) Rapid-X Using 3D Printers. Supplement of Academic Journal of Manufacturing Engineering, 2, 199-205.
- Horvath, J. (2014) A Brief History of 3D Printing, in Mastering 3D Printing. Springer, 3-10. https://doi.org/10.1007/978-1-4842-0025-4_1
- Mironov, V., et al. (2003) Organ Printing: Computer-Aided Jet-Based 3D Tissue Engineering. TRENDS in Biotechnology, 21, 157-161. https://doi.org/10.1016/S0167-7799(03)00033-7
- Bose, S., Vahabzadeh, S. and Bandyopadhyay, A. (2013) Bone Tissue Engineering Using 3D Printing. Materials Today, 16, 496-504. https://doi.org/10.1016/j.mattod.2013.11.017
- Campbell, T., et al. (2011) Could 3D Printing Change the World. Technologies, Potential, and Implications of Additive Manufacturing, Atlantic Council, Washington DC.
- Kruth, J.P., Leu, M.C. and Nakagawa, T. (1998) Progress in Additive Manufacturing and Rapid Prototyping. CIRP Annals-Manufacturing Technology, 47, 525-540. https://doi.org/10.1016/S0007-8506(07)63240-5
- Wohlers, T. (2010) Additive Manufacturing State of the Industry. Wohlers Report.
- Schroder, M., Falk, B. and Schmitt, R. (2015) Evaluation of Cost Structures of Additive Manufacturing Processes Using a New Business Model. Procedia CIRP, 30, 311-316. https://doi.org/10.1016/j.procir.2015.02.144
- Statistics, N.B. (2009) Annual Abstract of Statistic. National Bureau of Statistics (NBS), Abuja.
- Statistics, N.B.O., GDP 2015 (2015) Formal and Informal Sector Estimated Split: Sectorial Report. In: Statistics, N.B.O., Ed., National Bureau of Statistics (NBS), Abuja.
- Post, M.J. (2014) Cultured Beef: Medical Technology to Produce Food. Journal of the Science of Food and Agriculture, 94, 1039-1041. https://doi.org/10.1002/jsfa.6474