The criticisms regularly formulated towards clay or soil, in general, are its weak mechanical qualities and low water quality. Therefore, it is necessary to find techniques to improve the properties of this material, which is widely used worldwide. Here, we propose stabilizing clay with coconut fiber as a solution to enhance its mechanical properties. To do this, we used an experimental method, first determining the geotechnical properties of the clay and then its mechanical properties. The geotechnical study using the Proctor Test revealed that the dry density of the clay is γ b = 1.42 g/cm 3 , and its water content is W = 22.3%. By applying the rolling method, the Atterberg limits were determined: liquid limit W l = 63.6, plastic limit Wp = 27.9, plasticity index Ip = 35.7, and consistency index Ic = 1.46. With 25 < I P = 35.7 < 40, the material falls into class A3, a marly clay. Additionally, Ic = 1.45 > 1.3, according to the water classification, it falls into class A3ts. The mechanical part focused on compression and flexural strengths obtained using a PROETI hydraulic press. We obtained a flexural strength of 0.63 MPa for simple clay (BA); 0.89 MPa for clay + 0.25% fiber (BAF1/4); 1.68 MPa for clay + 0.5% fiber (BAF1/2); 1.87 MPa for clay + 0.75% fiber (BAF3/4); and 3.91 MPa for clay + 1% fiber (BAF1). As for the compression strength, BA = 5.90 MPa, BAF1/4 = 6.395 MPa, BAF1/2 = 6.292 MPa, BAF3/4 = 6.065 MPa, and BAF1 = 5.423 MPa. The addition of fiber has thus improved the mechanical qualities of the simple clay. These stabilized bricks can be used for sustainable and bioclimatic construction, providing higher durability and good comfort.
Meunier, A. (2008) Annuaire des minéraux du canada, Argiles. http://books.google.fr/books?id=vQvAAAAACAA
Moronta, A. (2004) Catalytic and Adsorption Properties of Modified Clay Surfaces. Interface Science and Technology , 1, 321-344. https://doi.org/10.1016/s1573-4285(04)80046-2
Majid, A.E., Baba, K. and Razzouk, Y. (2023) Assessing the Impact of Plant Fibers on Swelling Parameters of Two Varieties of Expansive Soil. Case Studies in Chem i cal and Environmental Engineering , 8, Article ID: 100408. https://doi.org/10.1016/j.cscee.2023.100408
Bo, M.W., Arulrajah, A., Sukmak, P. and Horpibulsuk, S. (2015) Mineralogy and Geotechnical Properties of Singapore Marine Clay at Changi. Soils and Found a tions , 55, 600-613. https://doi.org/10.1016/j.sandf.2015.04.011
Proust, C., Jullien, A. and Le Forestier, L. (2004) Détermination indirecte des limites d’Atterberg par gravimétrie dynamique. Comptes Rendus . Géoscience , 336, 1233-1238. https://doi.org/10.1016/j.crte.2004.06.003
Galvín, A.P., López-Uceda, A., Cabrera, M., Rosales, J. and Ayuso, J. (2020) Stabilization of Expansive Soils with Biomass Bottom Ashes for an Eco-Efficient Construction. Environmental Science and Pollution Research , 28, 24441-24454. https://doi.org/10.1007/s11356-020-08768-3
Malatrait, A.M. (1980) Inventaire des ressources en matériaux argileux de la région de Rhome-Aples. 1981st Edition, No. 7. Lion.
Ural, Z. and Ural, N. (2018) The Importance of Clay in Geotechnical Engineering. In: Editor, Built by Scientists , for Scientists , publisher, 83-101.
Sujatha, E.R. and Selsia Devi, S. (2018) Reinforced Soil Blocks: Viable Option for Low Cost Building Units. Construction and Building Materials , 189, 1124-1133. https://doi.org/10.1016/j.conbuildmat.2018.09.077
Mendoza, R. (2021) Shear Strength and Elastic Modulus Behavior of Coconut Fiber-Reinforced Expansive Soil. IOP Conference Series : Materials Science and Eng i neering , 1144, Article ID: 012043.
Huyen, B.T., Nguyen, D.H. and Sebaibi, N. (2018) A Simple Review of Using Coconut Fiber as Reinforcement in Composite. The 8 th International Conference of Asian Concrete Federation , Fuzhou, 4-7 November 2018, 307-319.
Estabragh, A.R., Bordbar, A.T. and Javadi, A.A. (2012) A Study on the Mechanical Behavior of a Fiber-Clay Composite with Natural Fiber. Geotechnical and Geolog i cal Engineering , 31, 501-510. https://doi.org/10.1007/s10706-012-9602-6
Bui, H., Sebaibi, N., Boutouil, M. and Levacher, D. (2020) Determination and Review of Physical and Mechanical Properties of Raw and Treated Coconut Fibers for Their Recycling in Construction Materials. Fibers , 8, Article No. 37. https://doi.org/10.3390/fib8060037
Attom, M.F., Al-Akhras, N.M. and Malkawi, A.I.H. (2009) Effect of Fibres on the Mechanical Properties of Clayey Soil. Proceedings of the Institution of Civil Eng i neers - Geotechnical Engineering , 162, 277-282. https://doi.org/10.1680/geng.2009.162.5.277
Obsharova, A.V. and Grishina, A.S. (2021) Effect of the Fiber Reinforcement on the Mechanical Properties of Clay Soils, Including Properties under Conditions of Seasonal Freezing and Thawing. Journal of Physics : Conference Series , 1928, Article ID: 012067. https://doi.org/10.1088/1742-6596/1928/1/012067
Regina, C., Baldin, B., Maiky, K.Y. and Gustavo, W. (2023) Mechanical Properties of a Clay Soil Reinforced with Rice Husk under Drained and Undrained Conditions. Journal of Rock Mechanics and Geotechnical Engineering , 15, 2676-2686.
Lal, D., Reddy, P., Kumar, R.S. and Rao, V.G. (2020) Stabilization of Expansive Soil by Using Jute Fiber. IOP Conference Series : Materials Science and Engineering , 998, Article ID: 012045. https://doi.org/10.1088/1757-899x/998/1/012045
Carmel, V.A. and Vinu, T. (2015) Stabilization of Soft Clay Using Lime and Jute Fibres. International Journal of Engineering Research and Technology , 3, 1-5.
Qu, J. and Zhu, H. (2021) Function of Palm Fiber in Stabilization of Alluvial Clayey Soil in Yangtze River Estuary. Journal of Renewable Materials , 9, 767-787. https://doi.org/10.32604/jrm.2021.013816
Chompoorat, T., Likitlersuang, S., Buathong, P., Jongpradist, P. and Jamsawang, P. (2023) Flexural Performance and Microstructural Characterization of Cement-Treated Sand Reinforced with Palm Fiber. Journal of Materials Research and Technology , 25, 1570-1584. https://doi.org/10.1016/j.jmrt.2023.06.036
Thennarasan Latha, A., Murugesan, B. and Skariah Thomas, B. (2023) Compressed Earth Block Reinforced with Sisal Fiber and Stabilized with Cement: Manual Compaction Procedure and Influence of Addition on Mechanical Properties. Materials Today : Proceedings . https://doi.org/10.1016/j.matpr.2023.04.373
Wu, Y., Li, Y. and Niu, B. (2014) Assessment of the Mechanical Properties of Sisal Fiber-Reinforced Silty Clay Using Triaxial Shear Tests. The Scientific World Jou r nal , 2014, Article ID: 436231. https://doi.org/10.1155/2014/436231
Tong, F., Ma, Q. and Xing, W. (2019) Improvement of Clayey Soils by Combined Bamboo Strip and Flax Fiber Reinforcement. Advances in Civil Engineering , 2019, Article ID: 7274161. https://doi.org/10.1155/2019/7274161
Anglade, E., Aubert, J., Sellier, A. and Papon, A. (2022) Physical and Mechanical Properties of Clay-Sand Mixes to Assess the Performance of Earth Construction Materials. Journal of Building Engineering , 51, Article ID: 104229. https://doi.org/10.1016/j.jobe.2022.104229
Khorram, N. and Rajabi, A.M. (2022) Strength Properties and Microstructural Characteristics of Clay Treated with Alkali Activated Mortar and Fiber. Constru c tion and Building Materials , 341, Article ID: 127486. https://doi.org/10.1016/j.conbuildmat.2022.127486
Widianti, A., Diana, W. and Fikriyah, Z.S. (2021). Unconfined Compressive Strength of Clay Strengthened by Coconut Fiber Waste. Proceedings of the 4 th I n ternational Conference on Sustainable Innovation 2020- Technology , Engineering and Agriculture ( ICoSITEA 2020), 199, 47-50. https://doi.org/10.2991/aer.k.210204.010
Sun, Z., Zhang, L., Liang, D., Xiao, W. and Lin, J. (2017) Mechanical and Thermal Properties of PLA Biocomposites Reinforced by Coir Fibers. International Journal of Polymer Science , 2017, Article ID: 2178329. https://doi.org/10.1155/2017/2178329
Kaushik, D. and Singh, S.K. (2021) Use of Coir Fiber and Analysis of Geotechnical Properties of Soil. Materials Today : Proceedings , 47, 4418-4422. https://doi.org/10.1016/j.matpr.2021.05.255
Gaspar, F., Bakatovich, A., Davydenko, N. and Joshi, A. (2020) Building Insulation Materials Based on Agricultural Wastes. In: Pacheco-Torgal, F., Ivanov, V. and Tsang, D.C.W., Eds., Bio - Based Materials and Biotechnologies for Eco - Efficient Construction , Elsevier, 149-170. https://doi.org/10.1016/b978-0-12-819481-2.00008-8
de Normalisation, A.F. (1993) Norme française NF P 94-051: Détermination des limites d’Atterberg.
AFNOR (2014) NF P94-093 Standard. 1-30.
LCPC (2000) Réalisation des remblais et des couches de forme. 2ème Edition.
Laibi, A.B., Gomina, M., Sorgho, B., Sagbo, E., Blanchart, P., Boutouil, M., et al . (2017) Caractérisation physico-chimique et géotechnique de deux sites argileux du Bénin en vue de leur valorisation dans l’éco-construction. International Journal of Biological and Chemical Sciences , 11, 499. https://doi.org/10.4314/ijbcs.v11i1.40
Zoma, F., Yonli, F.H., Malbila, E., Toguyeni, D.Y.K. and Hassel, I.B. (2020) Adding Hydrated Lime in a Material Made of Clayey Soil and Fibres: Formulation and Effects on Thermo-Mechanical Properties. Journal of Minerals and Materials Chara c terization and Engineering , 8, 149-161. https://doi.org/10.4236/jmmce.2020.83010
Miller, C.J. and Rifai, S. (2004) Fiber Reinforcement for Waste Containment Soil Liners. Journal of Environmental Engineering , 130, 891-895. https://doi.org/10.1061/(asce)0733-9372(2004)130:8(891)
Tang, C., Shi, B. and Zhao, L. (2010) Interfacial Shear Strength of Fiber Reinforced Soil. Geotextiles and Geomembranes , 28, 54-62. https://doi.org/10.1016/j.geotexmem.2009.10.001