The aim of this research was to develop an intrarradicular dental post based on epoxy resin/nano zirconium phosphate composite with potential appli-cation in prosthetic dentistry. Zirconium phosphate (ZrP) nanoparticle was synthesized by a reaction between phosphoric acid (H 3 PO 4 ) and zirconium (IV) oxide chloride 8-hydrate (ZrOCl 2 ·8H 2 O) and applied as filler. Commer-cial epoxy resin and hardener were used as polymer matrix. The composites were prepared at different proportions of epoxy resin/hardener, filler amount, reaction time and temperature. Infrared revealed that degree of conversion decreased with amount of ZrP. Insoluble matter was upper than 97%. Thermogravimetry indicated two steps of degradation. The best values of flexural modulus and flexural strength were achieved for the post desig-nated as 1:0.25:0.25. Laser scanning confocal microscopy suggested that the morphology of the posts fractured surface varied according to epoxy-resin:hardener ratio and the ZrP amount. From atomic force micros-copy, the topographic view exposed the shape and size of ZrP particles. Field emission scanning electron microscopy and energy dispersive spectroscopy indicated good adhesion between epoxy resin matrix-ZrP and that the pres-ence of phosphate rendered brittle the fracture surface.
Silva, M.A.D.L., Aguiar, G.A., Boaventura, R.S.N., Santos, K.Z.S.D.S., Bastos, E.D., Adriano, G.B., et al. (2020) Reabilitacao Estetica e Funcional com Pino de Fibra de Vidro [Aesthetic and Functional Rehabilitation with Fiberglass Pin]. Brazilian Journal of Health Review, 3, 17259-17267. https://doi.org/10.34119/bjhrv3n6-147
Meric, G., Dahl, J.E. and Ruyter, I.E. (2008) Cytotoxicity of Silica-Glass Fiber Reinforced Composites. Dental Materials, 24, 1201-1206. https://doi.org/10.1016/j.dental.2008.01.010
Martins, M.D., Junqueira, R.B., de Carvalho, R.F., Lacerda, M.F.L.S., Fae, D.S. and Lemos, C.A.A. (2021) Is a Fiber Post Better than a Metal Post for the Restoration of Endodontically Treated Teeth? A Systematic Review and Meta-Analysis. Journal of Dentistry, 112, Article ID: 103750. https://doi.org/10.1016/j.jdent.2021.103750
Figueiredo, F.E.D., Martins-Filho, P.R.S. and Faria-e-Silva, A.L. (2015) Do Metal Post-Retained Restorations Result in More Root Fractures than Fiber Post-Retained Restorations? A Systematic Review and Meta-Analysis. Journal of endodontics, 41, 309-316.
Zhou, L. and Wang, Q. (2013) Comparison of Fracture Resistance between Cast Posts and Fiber Posts: A Meta-Analysis of Literature. Journal of Endodontics, 39, 11-15. https://doi.org/10.1016/j.joen.2012.09.026
Lima, D.D.S., Lima, D.C., Gomes Junior, R.D.C., Costa, K.B., Vasconcelos, O.F. and Lima, T.M.d. (2020) Comportamento biomimético dos pinos de fibra de vidro: Relato de caso. Archives of Health Investigation, 10, 296-300. https://doi.org/10.21270/archi.v10i2.4880
Corazza, P.H., Domenico, M.B.D., Facenda, J.C., Merlo, E.G., Borba, M. and Ozcan, M. (2022) Fiberglass versus Cast Metal Posts: A Practical Review Based on Mechanical Properties. Brazilian Dental Science, 25, e3442. https://doi.org/10.4322/bds.2022.e3442
Oliveira, L.K.B.F., Silva, S.R.C.D., Moura, V.S.D., Andrade, A.M.D.C., Torres, L.M.D.M., Silva, M.D.A.F.D., et al. (2021) Comparative Analysis between Fiberglass Post and Cast Metal Core: An Integrative Review. Research, Society and Development, 10, e51610515236. https://doi.org/10.33448/rsd-v10i5.15236
Zavanelli, A.C., Burlim, J.M., Silva, M.A.A., Souza, J.P.D.V. and Mazaro, J.V.Q. (2020) Pino de quartzo personalizado: Descricao da técnica e protocolo de cimentacao. Revista Odontologica de Aracatuba, 41, 47-52.
Ruschel, G.H., Gomes, E.A., Silva-Sousa, Y.T., Pinelli, R.G.P., Sousa-Neto, M.D., Pereira, G.K.R., et al. (2018) Mechanical Properties and Superficial Characterization of a Milled CAD-CAM Glass Fiber Post. Journal of the Mechanical Behavior of Biomedical Materials, 82, 187-192. https://doi.org/10.1016/j.jmbbm.2018.03.035
Alcantara, R.Q.M. (2020) Fastening Element and System for Introduction in the Tooth Canal and Use of the Fastening Element for Introduction in the Tooth Canal. U.S. Patent Application No. 16/964, 705.
Matos, L.E.F., Pacheco, E.A.M. and Guerrero, D.C.P. (2021) Intraradicular Anchor Pin ANCLA Post. US Patent Application No 10, 987, 197 B2.
Barbosa Kasuya, A.V., Favarao, I.N., Machado, A.C., Rezende Spini, P.H., Soares, P.V. and Fonseca, R.B. (2020) Development of a Fiber-Reinforced Material for Fiber Posts: Evaluation of Stress Distribution, Fracture Load, and Failure Mode of Restored Roots. The Journal of Prosthetic Dentistry, 123, 829-838. https://doi.org/10.1016/j.prosdent.2019.04.026
Ramos Júnior, S., Felizardo, K.R., Guiraldo, R.D., Berger, S.B., Ramos, N.B.P., Assis, A.C.M.D., et al. (2021) CAD-CAM Endodontic Posts: Literature Review. Research, Society and Development, 10, e3210111314. https://doi.org/10.33448/rsd-v10i1.11314
Azizi, H. and Eslami-Farsani, R. (2019) Study of Mechanical Properties of Basalt Fibers/epoxy Composites Containing Silane-Modified Nanozirconia. Journal of Industrial Textiles, 51, 649-663. https://doi.org/10.1177/1528083719887530
Widodo, P., Mulyawan, W., Djustiana, N. and Joni, I.M. (2023) Synthesis and Characterization of Zirconia-Silica PMMA Nanocomposite for Endodontic Implants. Dentistry Journal, 11, Article 57. https://doi.org/10.3390/dj11030057
Baghdadi, Y.N., Youssef, L., Bouhadir, K., Harb, M., Mustapha, S., Patra, D., et al. (2020) The Effects of Modified Zinc Oxide Nanoparticles on the Mechanical/Thermal Properties of Epoxy Resin. Journal of Applied Polymer Science, 137, Article ID: 49330. https://doi.org/10.1002/app.49330
Soares, C.J., Santana, F.R., Pereira, J.C., Araujo, T.S. and Menezes, M.S. (2008) Influence of Airborne-Particle Abrasion on Mechanical Properties and Bond Strength of Carbon/Epoxy and Glass/Bis-GMA Fiber-Reinforced Resin Posts. The Journal of Prosthetic Dentistry, 99, 444-454. https://doi.org/10.1016/s0022-3913(08)60106-7
Zhang, X., Bai, T., Zhou, P., Yan, J., Yu, B., Huo, S., et al. (2024) Non-Phosphorus Glucosyl Schiff Bases for Smoke Inhibition and Mechanical Enhancement of Epoxy Resin Composites. Polymer Degradation and Stability, 223, Article ID: 110715. https://doi.org/10.1016/j.polymdegradstab.2024.110715
Guo, F., Xue, K., You, T., Hua, Z., Liu, L., Li, J., et al. (2024) Magnetically Assisted Construction of Al2O3 Platelets Dual Network and Its Excellent Thermal Conductivity in Epoxy Resin Composites. Composites Part A: Applied Science and Manufacturing, 179, Article ID: 107988. https://doi.org/10.1016/j.compositesa.2023.107988
Albitres, G., Garcia, E., Soares, C., Freitas, D., Neto, R.C. and Mendes, L. (2024) Post-consumer High Density Polyethylene/zirconium Phosphate and Aluminum Hydroxide Composites: Assessment of Physico-Mechanical and Flame Retardancy Properties. Journal of Composite Materials, 58, 489-503. https://doi.org/10.1177/00219983231226278
Garcia, E.E., Araujo, A.M.C.F., Albitres, G.A.V., Freitas, D.D.F.D.S., Mariano, D.M., Soares, C.M.F., et al. (2024) Antimicrobial Activity, Structural, Crystallographic and Thermal Characteristics of α-Titanium Phosphate Promoted by Silver Ions. Materials Sciences and Applications, 15, 253-269. https://doi.org/10.4236/msa.2024.158018
Kojima, S., Lee, S., Nagata, F., Kugimiya, S. and Kato, K. (2020) Protein Immobilisation onto Zirconium Phosphate with the Enhancement of the Adsorption Amount and Catalytic Activity. Materials Today Communications, 25, Article ID: 101310. https://doi.org/10.1016/j.mtcomm.2020.101310
Xu, L., Lei, C., Xu, R., Zhang, X. and Zhang, F. (2016) Hybridization of α-Zirconium Phosphate with Hexachlorocyclotriphosphazene and Its Application in the Flame Retardant Poly(Vinyl Alcohol) Composites. Polymer Degradation and Stability, 133, 378-388. https://doi.org/10.1016/j.polymdegradstab.2016.09.025
Xiao, Y., Xu, J., Huang, S. and Deng, H. (2017) Effects of α-ZrP on Crystallinity and Flame-Retardant Behaviors of PA6/MCA Composites. International Journal of Polymer Science, 2017, Article ID: 6034741. https://doi.org/10.1155/2017/6034741
Freitas, D.D.F.D.S., Albitres, G.A.V., Mariano, D.D.M., Cestari, S.P. and Mendes, L.C. (2022) Mechanical, Thermal, Rheological Assessment of Polyamide-6 Reinforced Composites by Addition of Lamellar Zirconium Phosphate. Journal of Thermoplastic Composite Materials, 36, 2600-2622. https://doi.org/10.1177/08927057221102858
Sabu, M., Bementa, E., Jaya Vinse Ruban, Y. and Ginil Mon, S. (2020) A Novel Analysis of the Dielectric Properties of Hybrid Epoxy Composites. Advanced Composites and Hybrid Materials, 3, 325-335. https://doi.org/10.1007/s42114-020-00166-0
Sukanto, H., Raharjo, W.W., Ariawan, D. and Triyono, J. (2023) Investigation of Cycloaliphatic Amine-Cured Bisphenol-A Epoxy Resin under Quenching Treatment and the Effect on Its Carbon Fiber Composite Lamination Strength. Journal of the Mechanical Behavior of Materials, 32, Article ID: 20220266. https://doi.org/10.1515/jmbm-2022-0266
Kang, D., Yu, X., Tong, S., Ge, M., Zuo, J., Cao, C., et al. (2013) Performance and Mechanism of Mg/Fe Layered Double Hydroxides for Fluoride and Arsenate Removal from Aqueous Solution. Chemical Engineering Journal, 228, 731-740. https://doi.org/10.1016/j.cej.2013.05.041
Jiang, F., Sun, H., Chen, L., Lei, F. and Sun, D. (2019) Dispersion-tribological Property Relationship in Mineral Oils Containing 2D Layered α-Zirconium Phosphate Nanoplatelets. Friction, 8, 695-707. https://doi.org/10.1007/s40544-019-0294-2
Ullah, R., Ahmad, I. and Zheng, Y. (2016) Fourier Transform Infrared Spectroscopy of “Bisphenol A”. Journal of Spectroscopy, 2016, Article ID: 2073613. https://doi.org/10.1155/2016/2073613
Mendes, L.C., Silva, D.F., Araujo, L.J.F. and Lino, A.S. (2014) Zirconium Phosphate Organically Intercalated/Exfoliated with Long Chain Amine. Journal of Thermal Analysis and Calorimetry, 118, 1461-1469. https://doi.org/10.1007/s10973-014-4056-0
Zhang, H., Li, K., Wang, M. and Zhang, J. (2021) The Preparation of a Composite Flame Retardant of Layered Double Hydroxides and α-Zirconium Phosphate and Its Modification for Epoxy Resin. Materials Today Communications, 28, Article ID: 102711. https://doi.org/10.1016/j.mtcomm.2021.102711
Plotino, G., Grande, N.M., Bedini, R., Pameijer, C.H. and Somma, F. (2007) Flexural Properties of Endodontic Posts and Human Root Dentin. Dental Materials, 23, 1129-1135. https://doi.org/10.1016/j.dental.2006.06.047
Tunca Taskiran, S., Tanoglu, M., Cerci, N., Cevahir, A., Turkdogan Damar, C., Unver, E., et al. (2024) Development of Resin-Based Dental Composites Containing Hydroxyapatite and Zirconia Nanoparticles. Polymer Composites, 45, 10470-10485. https://doi.org/10.1002/pc.28488
Mustafa, B.S., Jamal, G.M. and Gh. Abdullah, O. (2022) Improving the Tensile, Toughness, and Flexural Properties of Epoxy Resin Based Nanocomposites Filled with ZrO2 and Y2O3 Nanoparticles. Results in Physics, 38, Article ID: 105662. https://doi.org/10.1016/j.rinp.2022.105662
Qian, Y., Zheng, W., Chen, W., Feng, T., Liu, T.X. and Fu, Y.Q. (2021) Enhanced Functional Properties of CeO2 Modified Graphene/Epoxy Nanocomposite Coating through Interface Engineering. Surface and Coatings Technology, 409, Article ID: 126819. https://doi.org/10.1016/j.surfcoat.2020.126819
Zhou, Z., Pourhashem, S., Wang, Z., Duan, J., Zhang, R. and Hou, B. (2022) Distinctive Roles of Graphene Oxide, ZnO Quantum Dots, and Their Nanohybrids in Anti-Corrosion and Anti-Fouling Performance of Waterborne Epoxy Coatings. Chemical Engineering Journal, 439, Article ID: 135765. https://doi.org/10.1016/j.cej.2022.135765
khan, M.Z., Wang, F., Waleed, A., Huang, Z., Hassan, M.A.S. and Khan, A. (2020) Filler Concentration Effect on Breakdown Strength and Trap Level of Epoxy Resin-Al2O3 Nanocomposites. Polymer Bulletin, 78, 5891-5903. https://doi.org/10.1007/s00289-020-03411-0
Zhu, Z., Baker, J., Liu, C., Zhao, M., Kotaki, M. and Sue, H. (2021) High Performance Epoxy Nanocomposites Based on Dual Epoxide Modified α-Zirconium Phosphate Nanoplatelets. Polymer, 212, Article ID: 123154. https://doi.org/10.1016/j.polymer.2020.123154
Jiang, J., Shen, J., Yang, X., Zhao, D. and Feng, Y. (2023) Epoxy-functionalized POSS and Glass Fiber for Improving Thermal and Mechanical Properties of Epoxy Resins. Applied Sciences, 13, Article 2461. https://doi.org/10.3390/app13042461