The electrochemical behaviour of three duplex stainless steels, (SAF 2101, SAF 2304, SAF 2205) was investigated. Open circuit potential, E OC , measurements, and electrochemical impedance spectroscopy (EIS) were employed both in phosphate-buffered saline solution (PBS, pH = 7.2) and in PBS simulating in vitro inflammatory conditions (PBS + H 2 O 2 , pH = 5.0). It has been established that the tendency of the investigated steel materials towards corrosion decreases in the following order: SAF 2101 < SAF 2304 < SAF 2205 in both aggressive environments. The superior corrosion resistance exhibited by SAF 2205 is ascribed to the formation of a passive film with enhanced protective effectiveness than the one formed on SAF 2101 and SAF 2304, and this improvement is ascribed to a synergistic effect of Mo + N owing to the high molybdenum content in the alloy.
Gudić, S., Nagode, A., Šimic, K., Vrsalović, L. and Jozić, S. (2022) Corrosion Behaviour of Different Types of Stainless Steel in PBS Solution. Sustainability , 14, Article 8935. https://doi.org/10.3390/su14148935
Blackwood, D.J. (2003) Biomaterials: Past Successes and Future Problems. Corrosion Reviews , 21, 97-124. https://doi.org/10.1515/CORRREV.2003.21.2-3.97
Hansen, D. (2008) Metal Corrosion in the Human Body the Ultimate Biocorrosion Scenario. The Electrochemical Society Interface , 17, 31-34. https://doi.org/10.1149/2.F04082IF
Lopez, D.A., Duran, L. and Cere, S. (2001) Electrochemical Characterization of AISI 316L Stainless Steel in Contact with Simulated Body Fluid under Infection Conditions. Journal of Materials Science : Materials in Medicine , 19, 2137-2144. https://doi.org/10.1007/s10856-007-3138-y
Solar, R.J. (1979) Corrosion and Degradation of Implant Materials. American Society for Testing and Materials, 259.
Marshall, P.J. and Burstein, G.T. (1983) The Effects of pH on the Repassivation of 304L Stainless Steel. Corrosion Science , 23, 1219-1228. https://doi.org/10.1016/0010-938X(83)90049-5
Köse, C., Kacar, R., Zorba, A.P., Bağirova, M., Abramor, E.S. and Allahverdiyev, A.M. (2018) Interactions between Fibroblast Cells and Laser Beam in AISI 2205 Duplex Stainless Steel. Materials Science ( Medžiagotyra ), 24, 159-165. https://doi.org/10.5755/j01.ms.24.2.18006
Beloti, M.M., Rollo, J.M.D.A., Itman Filho, A. and Rosa, A.L. (2004) In Vitro Biocompatibility of Duplex Stainless Steel with and without 0.2% Niobium. Journal of Applied Biomaterials & Biomechanics , 2, 162-168.
Kocijan, A. and Conradi, M. (2010) The Corrosion Behaviour of Austenitic and Duplex Stainless Steel in Artificial Body Fluids. Materials and Technologies , 44, 21-24.
Hammood, A.S., Noor, A.F. and Alkhafagy, M.T. (2017) Effect of Heat Tretament on Corrosion Behaviour of Duplex Stainless Steel in Orthodontic Applications. Materials Research Express , 4, Article 126506. https://doi.org/10.1088/2053-1591/aa9c02
Brooks, E.K., Brooks, R.P. and Ehrensberger, M.T. (2017) Effects of Simulated Inflammation on the Corrosion of 316L Stainless Steel. Materials Science and Engineering : C , 71, 200-205. https://doi.org/10.1016/j.msec.2016.10.012
Fonseca, C. and Barbosa, M.A. (2001) Corrosion Behaviour of Titanium in Biofluids Containing H 2 O 2 Studied by Electrochemical Impedance Spectroscopy. Corrosion Science , 43, 547-559. https://doi.org/10.1016/S0010-938X(00)00107-4
Assis, S.L., Rogero, S.O., Antunes, R.A., Padilha, A.F. and Costa, I. (2005) A Comparative Study of the In Vitro Corrosion Behaviour and Cytotoxicity of a Superferritic Stainless Steel, a Ti-13Nb-13Zr Alloy, and an Austenitic Stainless Steel in Hank’s Solution. Journal of Biomedical Materials Research Part B : Applied Biomaterials , 73B, 109-116. https://doi.org/10.1002/jbm.b.30205
Yu, S.Y. and Scully, J.R. (1997) Corrosion and Passivity of Ti-13% Nb-13% Zr in Comparison to Other Biomedical Implant Alloys. Corrosion , 53, 965-976. https://doi.org/10.5006/1.3290281
Quin, P., Lui, Y., Sercombe, T.B., Li, Y., Zhang, C., Cao, C., Sun, H. and Zhang, L.C. (2018) Improved Corrosion Resistance on Selective Laser Melting Procedure Ti-5Cu Alloy after Heat Treatment. ACS Biomaterials Science & Engineering , 4, 2633-2642. https://doi.org/10.1021/acsbiomaterials.8b00319
El-Taib-Heakal, F., Shebata, O.S. and Tantawy, N.S. (2014) Integrity of Metallic Medical Implants in Physiological Solutions. International Journal of Electrochemical Science , 9, 1986-2004. https://doi.org/10.1016/S1452-3981(23)07905-1
Rondelli, G., Torricelli, P. and Giardino, M. (2005) In Vitro Corrosion Study by EIS of a Nickel-Free Stainless Steel for Orthopedic Applications. Biomaterials , 26, 739-744. https://doi.org/10.1016/j.biomaterials.2004.03.012
Tudose, A.E., Demetrescu, I., Golgovici, F. and Fulger, M. (2021) Oxidation Behaviour of an Austenitic Steel (Fe, Cr and Ni), the 310 H, in a Deaerated Supercritical Water System. Metals , 11, Article 571. https://doi.org/10.3390/met11040571
Antunes, A., De Oliveira, M.C.L. and Costa, I. (2012) Study of the Correlation Between Corrosion Resistance and Semi-Conducting Properties of the Passive Film of AISI 316L Stainless Steel in Physiological Solution. Materials and Corrosion , 63, 586-592. https://doi.org/10.1002/maco.201006052
Valero Vidal, C. and Igual Munoz, A. (2008) Electrochemical Characterization of Biomedical Alloys for Surgical Implants in Simulated Body Fluids. Corrosion Science , 50, 1954-1961. https://doi.org/10.1016/j.corsci.2008.04.002
Hakiki, N.E., Boudin, S., Rondot, B. and Da Cunha Belo, M. (1995) The Electronic Structure of Passive Films Formed on Stainless Steels. Corrosion Science , 37, 1809-1822. https://doi.org/10.1016/0010-938X(95)00084-W
Macdonald, J.R. (1987) Impedance Spectroscopy. John Wiley & Sons.
Wegrelius, L., Falkenberg, F. and Olefjord, I. (1999) Passivation of Stainless Steels in Hydrochloric Acid. Journal of the Electrochemical Society , 146, Article 1397. https://doi.org/10.1149/1.1391777
Abreu, C.M., Cristobal, M.J., Losada, R., Novoa, X.R., Pena, G. and Perez, M.C. (2004) Comparative Study of Passive Films of Different Stainless Steels Developed on Alkaline Medium. Electrochimica Acta , 49, 3049-3056. https://doi.org/10.1016/j.electacta.2004.01.064
Boudalia, M., Guenbour, A., Bellaouchou, A., Fernandez-Domene, R.M. and Garcia-Anton, J. (2013) Corrosion Behaviour of a Highly Alloyed Austenitic Alloy UB6 in Contaminated Phosphoric Acid. International Journal of Corrosion , 20, Article 363826. https://doi.org/10.1155/2013/363826
Anderson, J.M., Rodriguez, A. and Chang, D.T. (2008) Foreign Body Reaction on Biomaterials. Seminars in Immunology , 20, 86-100. https://doi.org/10.1016/j.smim.2007.11.004
Babior, B., Kipnes, R. and Curnutte, J. (1973) The Production by Leukocytes of Superoxide, a Potential Bactericidal Agent. Journal of Clinical Investigation , 52, 741-744. https://doi.org/10.1172/JCI107236
Bennet, D. (1984) Effects of pH and Peroxide Addition on Corrosion of Type 316L Stainless Steel in Chloride Dioxide Bleaching Stage Washer Environment. Corrosion , 40, 1-5. https://doi.org/10.5006/1.3579290
Bellanger, G. (1994) Effect of the Hydrogen Peroxide Formed in Tritiated Water on the Behaviour of 316L Stainless Steel. Journal of Nuclear Materials , 210, 63-72. https://doi.org/10.1016/0022-3115(94)90223-2
Gardin, E., Zanna, S., Seyoux, A., Allion-Maurer, A. and Marcus, P. (2018) Comparative Study of the Surface Oxide Films on Lean Duplex and Corresponding Single Phase Stainless Steels by XPS and ToF-SIMS. Corrosion Science , 143, 403-413. https://doi.org/10.1016/j.corsci.2018.08.009
Olefjord, I. and Wegrelius, L. (1990) Surface Analysis of Passive State. Corrosion Science , 31, 89-98. https://doi.org/10.1016/0010-938X(90)90095-M
De Vito, E. and Marcus, P. (1992) XPS Study of Passive Films Formed on Molybdenum-Implanted Austenitic Stainless Steels. Surface and Interface Analysis , 19, 403-408. https://doi.org/10.1002/sia.740190175
Olefjord, I. and Wegrelius, L. (1996) The Influence of Nitrogen on the Passivation of Stainless Steels. Corrosion Science , 38, 1203-1220. https://doi.org/10.1016/0010-938X(96)00018-2
Sedriks, A.J. (1986) Effects of Alloy Composition and Microstructure on the Passivity of Stainless Steels. Corrosion , 42, 376-389. https://doi.org/10.5006/1.3584918
Oh, K.-T., Kim, Y.-S., Park, Y.-S. and Kim, K.-N. (2004) Properties of Super Stainless Steels for Orthodontic Applications. Journal of Biomedical Materials Research Part B : Applied Biomaterials , 69B, 183-194. https://doi.org/10.1002/jbm.b.30002
Feng, H., Dai, J., Li, H., Cao, X., Zhu, H., Zhang, S., He, T., Jiang, Z. and Zhang, T. (2024) Visualizing and Quantifying the Influence of N-Mo Synergy on Corrosion Resistance of Stainless Steel by Dissolution-Diffusion-Deposition Model. Corrosion Science , 235, Article 112162. https://doi.org/10.1016/j.corsci.2024.112162
Kim, D. (1992) A Study of the Effect of Nitrogen and Molybdenum in the Corrosion Inhibition of Austenitic Stainless Steels. State University of New York.
Olsson, C.O.A. (1995) The Influence of Nitrogen and Molybdenum on Passive Films Formed on the Austenoferritic Stainless Steel 2205 Studied by AES and XPS. Corrosion Science , 37, 467-479. https://doi.org/10.1016/0010-938X(94)00148-Y
Loable, C., Vicosa, I.N., Mesquita, T.J., Mantel, M., Nogueira, R.P., Brthonnè, G., Chauveau, E. and Roche, V. (2017) Synergy between Molybdenum and Nitrogen on the Pitting Corrosion and Passive Film Resistance of Austenitic Stainless Steels as a pH-Dependent Effect. Materials Chemistry and Physics , 186, 237-245. https://doi.org/10.1016/j.matchemphys.2016.10.049
Willenbruch, R.D., Clayton, C.R., Overslulzen, M., Kim, D. and Lu, Y. (1990) An XPS and Electrochemical Study of the Influence of Molybdenum and Nitrogen on the Passivity of Austenitic Stainless Steels. Corrosion Science , 31, 179-190. https://doi.org/10.1016/0010-938X(90)90106-F
Clayton, C.R., Halada, G.P. and Kearns, J.R. (1995) Passivity of High-Nitrogen Stainless Alloys: The Role Metal Oxyanions and Salt Films. Materials Science and Engineering : A , 198, 135-144. https://doi.org/10.1016/0921-5093(95)80068-6
Tsai, W.-T. and Chen, J.-R. (2007) Galvanic Corrosion between the Constituent Phases in Duplex Stainless Steels. Corrosion Science , 49, 3659-3668. https://doi.org/10.1016/j.corsci.2007.03.035