Lesser-utilised wood species may have the same or even superior performance for certain end-uses compared to the majority of Ghana’s most commonly used wood species. Avodire ( Turraeanthus africanus ) is a Lesser-utilised wood species and is found in large quantities in forests of Ghana, but it is a less durable wood. Thermal treatment is a technique that can be used to enhance the durability of wood. The purpose of this research was to chemically and thermally treat Avodire wood samples to investigate the impact of the modification on its durability for interior applications. The wood samples were chemically modified to a weight percentage gain of 7.78 ± 0.48 and thermally modified between temperatures 150˚C and 240˚C. Thermo-chemically modified samples exhibited resistance to decay and termite degradation. According to the study’s findings, samples that were not thermally treated and those that were thermally treated but not chemically modified had more weight loss and were less resistant to termite damage. Thermo-chemically modified samples at temperatures between 150˚C and 240˚C were effective for increasing the species’ resistance to damage from termites and decay.
KeywordsAvodireDurabilityGraveyardThermal TreatmentWeight Loss
Pétrissans, M., Pétrissans, A. and Gérardin, P. (2003) Pore Size Diameter, Shrinkage and Specific Gravity Evolution during the Heat Treatment of Wood. Journal of Innovation in Forest Industry and Engineering Design , 1, 18-24.
Pétrissans, M., Pétrissans, A. and Gérardin, P. (2007) Check the Durability of Heat-Treated Beech Wood. Tracés , Bulletin Technique Technologie du bois de la Suisse Romande , 17, 12-16.
Allegretti, O., Brunetti, M., Cuccui, I., Ferrari, S., Nocetti, M. and Terziev, N. (2012) Thermo-vacuum Modification of Spruce ( Picea abies Karst.) and Fir ( Abies alba Mill.) Wood. BioResources , 7, 3656-3669. https://doi.org/10.15376/biores.7.3.3656-3669
Kamdem, D.P., Pizzi, A. and Jermannaud, A. (2002) Durability of Heat-Treated Wood. Holz als Roh - und Werkstoff , 60, 1-6. https://doi.org/10.1007/s00107-001-0261-1
Tjeerdsma, B.F. and Militz, H. (2005) Chemical Changes in Hydrothermal Treated Wood: FTIR Analysis of Combined Hydrothermal and Dry Heat-Treated Wood. Holz als Roh - und Werkstoff , 63, 102-111. https://doi.org/10.1007/s00107-004-0532-8
Yildiz, S., Gezer, E.D. and Yildiz, U.C. (2006) Mechanical and Chemical Behavior of Spruce Wood Modified by Heat. Building and Environment , 41, 1762-1766. https://doi.org/10.1016/j.buildenv.2005.07.017
Nguila Inari, G., Petrissans, M. and Gerardin, P. (2006) Chemical Reactivity of Heat-Treated Wood. Wood Science and Technology , 41, 157-168. https://doi.org/10.1007/s00226-006-0092-7
Gunduz, G., Aydemir, D. and Karakas, G. (2009) The Effects of Thermal Treatment on the Mechanical Properties of Wild Pear ( Pyrus elaeagnifolia Pall.) Wood and Changes in Physical Properties. Materials & Design , 30, 4391-4395. https://doi.org/10.1016/j.matdes.2009.04.005
Andersons, B., Chirkova, J., Andersone, I. and Irbe, I. (2012) Prediction of the Properties of Soft Deciduous Wood in Thermal Modification. Proceedings of the 2 nd Workshop Cost Action FP 0904, Nancy, 96-97.
Dilik, T. and Hiziroglu, S. (2012) Bonding Strength of Heat Treated Compressed Eastern Redcedar Wood. Materials & Design , 42, 317-320. https://doi.org/10.1016/j.matdes.2012.05.050
Mburu, F., Dumarcay, S., Huber, F., Petrissans, M. and Gerardin, P. (2007) Evaluation of Thermally Modified Grevillea Robusta Heartwood as an Alternative to Shortage of Wood Resource in Kenya: Characterisation of Physicochemical Properties and Improvement of Bio-Resistance. Bioresource Technology , 98, 3478-3486. https://doi.org/10.1016/j.biortech.2006.11.006
Shi, J.L., Kocaefe, D., Amburgey, T. and Zhang, J. (2007) A Comparative Study on Brown-Rot Fungus Decay and Subterranean Termite Resistance of Thermally-Modified and ACQ-C-Treated Wood. Holz als Roh-und Werkstoff , 65, 353-358. https://doi.org/10.1007/s00107-007-0178-4
Surini, T., Charrier, F., Malvestio, J., Charrier, B., Moubarik, A., Castéra, P., et al. (2011) Physical Properties and Termite Durability of Maritime Pine Pinus pinaster Ait., Heat-Treated under Vacuum Pressure. Wood Science and Technology , 46, 487-501. https://doi.org/10.1007/s00226-011-0421-3
Sivrikaya, H., Can, A., de Troya, T. and Conde, M. (2015) Comparative Biological Resistance of Differently Thermal Modified Wood Species against Decay Fungi, Reticulitermes grassei and Hylotrupes bajulus . Maderas. Ciencia y tecnología , 17, 559-570. https://doi.org/10.4067/s0718-221x2015005000050
Salman, S., Pétrissans, A., Thévenon, M.F., Dumarçay, S., Perrin, D., Pollier, B., et al. (2014) Development of New Wood Treatments Combining Boron Impregnation and Thermo Modification: Effect of Additives on Boron Leachability. European Journal of Wood and Wood Products , 72, 355-365. https://doi.org/10.1007/s00107-014-0787-7
Salman, S., Pétrissans, A., Thévenon, M.F., Dumarçay, S. and Gérardin, P. (2015) Decay and Termite Resistance of Pine Blocks Impregnated with Different Additives and Subjected to Heat Treatment. European Journal of Wood and Wood Products , 74, 37-42. https://doi.org/10.1007/s00107-015-0972-3
Marfo, E.D., Wereko, E.Y. and Larbi, K.O. (2017) Chemical Modification of the Tropical Hardwood Species, Celtis mildbraedii (ESA FUFUO), to Improve Its Durability. Journal of Wood Chemistry and Technology , 38, 51-56. https://doi.org/10.1080/02773813.2017.1372476
Blackham, G., Prado, N., Parke, J. and Bastos, C.T. (2020) Lesser-Known and Less-er-Used Timber Species: Utilising Ghana’s Sustainable Timber Resources. BVRIO, Forestry Commission.
Ratcliffe, L.P.D., Ryan, A.J. and Armes, S.P. (2013) From a Water-Immiscible Monomer to Block Copolymer Nano-Objects via a One-Pot RAFT Aqueous Dispersion Polymerization Formulation. Macromolecules , 46, 769-777. https://doi.org/10.1021/ma301909w
American Society for Testing and Materials (ASTM) D1758 (2006) Standard Test Method of Evaluating Wood Preservatives by Field Stakes. American Society for Testing and Materials, 220-226.
Quartey, G.A., Zuercher, E. and Frimpong Mensah, K. (2014) Durability Investigations of Lesser-Known Ghanaian Wood Species. Journal of Technology , Takoradi Poly technic , 3, 24-30.
Hakkou, M., Pétrissans, M., Gérardin, P. and Zoulalian, A. (2006) Investigations of the Reasons for Fungal Durability of Heat-Treated Beech Wood. Polymer Degradation and Stability , 91, 393-397. https://doi.org/10.1016/j.polymdegradstab.2005.04.042
Chaouch, M., Dumarçay, S., Pétrissans, A., Pétrissans, M. and Gérardin, P. (2013) Effect of Heat Treatment Intensity on Some Conferred Properties of Different European Softwood and Hardwood Species. Wood Science and Technology , 47, 663-673. https://doi.org/10.1007/s00226-013-0533-z
Eaton, R.R. and Hall, M.D.C. (1993) Wood, Decay, Pest and Protection. Chapman and Hall.
Hill, C.A.S. (2002) How Does the Chemical Modification of Wood Provide Protection Against Decay Fungi? School of Agricultural Sciences, University of Wales, Bangor. Presentation for COST E22.