Production of Ca<sub>2</sub>AlNbO<sub>6</sub> Ceramics and Study of Their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements used in Petroleum Extraction
- 1 Departamento de Engenharia Mecanica, Universidade Federal de Pernambuco, Recife, Brasil
- 2 Departamento de Engenharia Mecanica, Universidade Federal de Pernambuco, Recife, Brasil
- 3 Departamento de Engenharia Mecanica, Universidade Federal de Pernambuco, Recife, Brasil
- 4 Departamento de Engenharia Mecanica, Universidade Federal de Pernambuco, Recife, Brasil
Abstract
In the present work a niobium based complex cubic perovskite oxide Ca 2 AlNbO 6 ceramic was produced, characterized and studied its stability in crude petroleum environment for inert ceramic embedding for temperature sensors used in petroleum extraction. Ca 2 AlNbO 6 ceramic powder was prepared through thermo-mechanical processing. Structural characteristics of calcined material was investigated by powder X-ray diffarctometry, which presented a single phase complex cubic perovskite structure with lattice parameter a = 7.6599 ?. Compacted discs of Ca 2 AlNbO 6 ceramics were sintered in the temperature range 1250°C - 1350°C during 24 hours in ambient atmosphere. Microstructure of the sintered ceramics was studied by scanning electron microscopy and mechanical behavior was studied by Vicker’s microhardness testing. Ca 2 AlNbO 6 ceramics sintered at 1350°C presented best results in terms of microstructural homogeneity and mechanical hardness. Therefore these sintered ceramics were submerged in crude petroleum for 60 days. Ceramics were taken out from the petroleum periodically and subjected to structural, microstructural and mechanical characterizations. Results showed that ceramics submerged in crude petroleum did not suffer any change at any stage of submersion. These characteristics make this material suitable for inert ceramic embedding for sensors used in petroleum extraction.
- M. Chandler, “Ceramics in the Modern World,” Double Day & Co. Inc., New York, 1967.
- J. J. Reed, “Principles of Ceramic Processing,” John Wiley and Sons, New York, 1988.
- D. W. Richardson, “Modern Ceramic Engineering,” Marcel Dekker Inc., New York, 1982.
- L. G. Tejuca and J. L. G. Fierrro, “Properties and Applications of Perovskite Type Oxides,” Marcel Decker Inc., New York, 1993
- M. H. Lewis, “Engineering Ceramics: Twentieth Century Developments and Prospects for the New Millennium,” Proceedings of International Symposium on Materials for the Third Millennium, Kanpur, 2001, pp. 47-73.
- F. Galasso, L. Katz and R. Ward, “Substitution in the Octahedrally Coordinated Cation Positions in Compounds of the Perovskite Type,” Journal of the American Ceramic Society, Vol. 81, 1959, p. 820.
- F. Galaso, J. R. Barrante and L. Katz, “Alkaline Earth Tantalum-Oxygen Phases Including Crystal Structure of an Ordered Perovskite Compound Ba3SrTa2O9,” Journal of the American Chemical Society, Vol. 83, No. 13, 1961, pp. 2830-2832. doi:10.1021/ja01474a010
- C. D. Brandle and V. J. Fratello, “Preparation of Perovskite Oxides for High Tc Superconductor Substrates,” Journal of Materials Research, Vol. 5, No. 10, 1990, pp. 2160-2164. doi:10.1557/JMR.1990.2160
- V. J. Fratello, C. W. Berkstresser, C. D. Brandle and A. J. Van Graitis, “Nickel containing Perovskites,” Journal of Crystal Growth, Vol. 166, No. 1-4, 1996, pp. 878-882. doi:10.1016/0022-0248(95)00474-2
- J. E. Hove and W. C. Riley, “Modern Ceramics,” John Wiley and Sons, New York, 1965.
- S. Y. Istomin, G. Svensson and J. Kohler, ‘Structures and Properties of the Perovskite-Type Compounds Na1-xSrxNbO3 (0.1 ≤ x ≤ 0.9)—From Insulating to Metallic Conductivity,” Journal of Solid State Chemistry, Vol. 167, No. 1, 2002, pp. 7-16. doi:10.1006/jssc.2002.9603
- C. M. Lapa, R. A. S. Ferreira, J. A. Aguiar, C. L. Silva, D. P. F. Souza and Y. P. Yadava, “Sintering, Microstructure and Mechanical Properties of Ba2HoWO5.5 Ceramics,” Materials Science Forum, Vol. 498-499, 2005, pp. 529-534. doi:10.4028/www.scientific.net/MSF.498-499.529
- Y. P. Yadava and R. A. S. Ferreira, ‘Study of Sintering Behavior of Ba2AlSn5.5 Ceramic Powder Compacts as Substrate for Temperature Sensing Devices,” Materials Science Forum, Vol. 591-593, 2008, pp. 661-666. doi:10.4028/www.scientific.net/MSF.591-593.661