Chemical Reaction and Crystalline Procedure of Bismuth Titanate Nanoparticles Derived by Metalorganic Decomposition Technique
- 1
- 2
- 3
- 4
- 5
- 6
Abstract
The homogeneous bismuth titanate single-phase nanoscaled ceramic powders have been prepared by means of metalorganic decomposition. The thermal decomposition/oxidation of the preheated precursor, as investigated by differential thermalgravimetric analysis, X-ray powder diffraction, and environment scanning electron microscope, lead to the formation of a well-defined orthorhombic bismuth titanate compound. Formation of the layered perovskite-like bismuth titanate occurs via intermediates with sequential changes in the coordination polyhedron of bismuth. The chemical reactions of precursor powder in heat treatment process have been investigated further by Raman and Fourier transform infrared spectra, and the reaction mechanism was tentatively proposed thereafter.
- P. Siriprapa, A. Watcharapasorn and S. Jiansirisomboon, “Electrical and Mechanical Characteristics of (Bi4-x Lax) Ti3O12 Ceramics,” Ferroelectrics, Vol. 382, No. 1, 2009, pp. 160-165.
- I. L. Trubnikov, S. N. Svirskaya, A. A. Zubkov and I. N. Toguleva, “Possible Ways to Obtain Materials Based on Bismuth Titanate Bi4Ti3O12,” Russian Journal of Applied Chemistry, Vol. 82, No. 11, 2009, pp. 1911-1914.
- A. Moure, A. Castro and L. Pardo, “Aurivillius-Type Ceramics, A Class of High Temperature Piezoelectric Materials: Drawbacks, Advantages and Trends,” Progress in Solid State Chemistry, Vol. 37, No. 1, 2009, pp. 15-39.
- M. Villegas, A. C. Caballero, T. Jardiel, C. Arago and J. Maudes, “Evaluation of Piezoelectric Properties of Bi4Ti3O12 Based Ceramics at High Temperature,” Ferroelectrics, Vol. 393, 2009, pp. 44-53.
- A. Watcharapasorn, P. Siriprapa, and S. Jiansirisomboon, “Grain Growth Behavior in Bismuth Titanate-Based Ceramics,” Journal of the European Ceramic Society, Vol. 30, No. 1, 2010, pp. 87-93.
- P. Pookmanee and S. Phanichphant, “Characterization of Lead-Free Bismuth Titanate (Bi4Ti3O12) Synthe-Sized by a Modified Oxalate Co-Precipitation Method,” Journal of Ceramic Processing Research, Vol. 10, No. 4, 2009, pp. 448-452.
- H. Ke, W. Wang, L. Chen, J. Xu, D. Jia, Z. Lu and Y. Zhou, “Crystallization Process of Lanthanum-Substituted Bismuth Titanate Synthesized by a Facile Sol-Gel Method,” Journal of Sol-Gel Science and Technology, Vol. 53, No. 1, 2010, pp. 135-140.
- Y. Wang, Y. Wen, H. Ding and Y. Shan, “Improved Structural Stability of Titanium-Doped Beta-Bi2O3 during Visible-Light-Activated Photocatalytic Processes,” Journal of Materials Science, Vol. 45, No. 5, 2010, pp. 1385-1392.
- A. Watcharapasorn, P. Siriprapa and S. Jiansirisomboon, “Grain Growth Behavior in Bismuth Titanate-Based Ceramics,” Journal of the European Ceramic Society, Vol. 30, No. 1, 2010, pp. 87-93.
- B. D. Stojanovic, A. Z. Simoes, C. O. Paiva-Santos, C. Quinelato, E. Longo and J. A. Varela, “Effect of Processing Route on the Phase Formation and Properties of Bi4Ti3O12 Ceramics,” Ceramics International, Vol. 32, No. 6, 2006, pp. 707-712.
- H. Idink, V. Srikanth, W. B. White, and E. C. Subbarao “Raman Study of Low Temperature Phase Transitions in Bismuth Titanate, Bi4Ti3O12,” Journal of Applied Physics, Vol .76, No. 3, 1994, pp. 1819-1823.
- P. R. Graves, G. Hua, S. Myhra and J. G. Thompson, “The Raman Modes of the Aurivillius Phases: Temperature and Polarization Dependence,” Journal of Solid State Chemistry, Vol. 114, No. 1, 1995, pp. 112-122.