Alginate Reinforced Chitosan and Starch Beads in Slow Release Formulation of Imazaquin Herbicide—Preparation and Characterization
- 1 Department of Chemistry, University of Agriculture, Makurdi, Nigeria
- 2 Department of Chemistry, University of Agriculture, Makurdi, Nigeria
- 3 Department of Chemistry, Nnamdi Azikiwe University, Awka, Nigeria
Abstract
In a bid to make slow release formulations of imazaquin, the herbicide was encapsulated in starch and chitosan beads reinforced with alginate. The beads were characterized using SEM, DSC and FTIR. Two types of formulations were made by extrusion into 0.25 M calcium chloride solution: chitosan/alginate (LNCI) and starch/alginate (LNSI) beads, and the third was by gelatinization of starch at 75?C (LNSI2). Findings showed highly porous spherical beads, the starch/alginate beads bigger and less porous than the chitosan/alginate beads with diameters of 2.53 ± 0.01 and 2.31 ± 0.01 mm; porosity of 57.58% ± 0.2% and 81.28% ± 0.2% and swelling of 34.91% ± 0.2% and 80.35% ± 0.2%, respectively. FTIR revealed a reduction in intensity of the carboxylate peaks of alginate and the peak at 1058 cm?1, present in the FTIR of the matrices, is shifted to lower wave-numbers in the formulations, signifying interactions between the formulation components that make for good slow release. The DSC thermograms of all formulations showed evidence of interaction of imazaquin carboxylate group with the N-atoms of the macromolecules, which is indicative of reduced crystallinity of imazaquin.
- T. Roberts, “Metabolic Pathways of Agrochemicals Part 1: Herbicides and Plant Growth Regulators,” The RSC, Cambridge, 1998.
- H. E. Quicke, E. Hoien and L. Beaudrot, “Imazaquin, Imazapic and Pendimethalin for Weed Control in Hybrid Poplar: The 1998 Clatskanie, Oregon Study,” American Cyanamid Forestry Technical Service Research Report, 1999, pp. 99-101.
- A. Borzacchielo, L. Ambrosias, P. Netter, L. Nicholais, A. Balard and P. Sam, “Chitosan—Based Hydrogels: Synthesis and Characterization,” Journal of Material Sciences: Materials in Medicine, Vol. 12, No. 10-12, 2001, pp. 861-864. doi:10.1023/A:1012851402759
- X. Z. Shu and K. J. Zhu, “A Novel Approach to Prepare Tripolyphosphate/Chitosan Complex Beads for Controlled Release Drug Delivery,” International Journal of Pharmaceutics, Vol. 201, No. 1, 2000, pp. 51-58. doi:10.1016/S0378-5173(00)00403-8
- L. Wu and M. Lin, “Preparation and Properties of Chitosan-Coated NPK Compound Fertilizer with Controlled Release and Water Retention,” Carbohydrate Polymers, Vol. 72, No. 2, 2008, pp. 240-247. doi:10.1016/j.carbpol.2007.08.020
- M. A. Teixeira, W. J. Paterson, Q. Li, E. J. Dum, B. K. Hunter and M. F. A. Goosen, “Assessment of Chitosan Gels for the Controlled Release of Agrochemicals,” In- dustrial & Engineering Chemistry Research, Vol. 29, No. 7, 1990, pp. 1205-1209. doi:10.1021/ie00103a019
- P. R. F. Barret, “Some Studies on the Use of Alginates for the Placement and Controlled Release of Diquat on Submerged Aquatic Plants,” Pesticide Science, Vol. 9, No. 5, 1978, pp. 425-433. doi:10.1002/ps.2780090507
- W. J. Connick Jr., “Controlled Release of the Herbicides 2,4-D and Dichlobenil from Alginate Gels,” Journal of Applied Polymer Science, Vol. 27, No. 9, 1982, pp. 3341- 3348. doi:10.1002/app.1982.070270912
- L. Vollner, “Agrochemical Formulations for Improved Efficacy and Reduced Environmental Impacts: Slow Release Formulations with Natural Polymers,” In: M. Mansour, Ed., Study and Prediction of Pesticides Behaviour in Soils, Plants and Aquatic Systems, Neuherberg GSF, 1990, pp. 136-145.
- J. Gan, M. Hussaina and M. N. Rathor, “Behaviour of Alginate Kaolin Based Controlled-Release Formulations of the Herbicide Thiobencarb in a Simulated Ecosystem,” Pesticide Science, Vol. 42, No. 4, 1994, pp. 261-272. doi:10.1002/ps.2780420403
- A. B. Pepperman and J. W. Kuan, “Slow Release Formulations of Metribuzin Based on Alginate-Kaolin-Linseed Oil,” Journal of Controlled Release, Vol. 26, No. 1, 1993, pp. 21-30. doi:10.1016/0168-3659(93)90205-J