Poly(Vinyl Alcohol)-Infiltrated Carbon Nanotube Carpets
- 1 Department of Materials Science and Engineering, University of Ioannina, Ioannina, Greece
Abstract
Carbon nanotube-polymer interaction is one of the key factors controlling the mechanical properties in composite and hybrid systems of such constituents. The current study reports a series of direct observations of substantial polymer sheathing phenomena on millimeters-high carpets of vertically aligned tubes infiltrated by Poly(vinyl alcohol) (PVA). SEM and TEM images of the composite’s fracture surface revealed that sheathing was extensive and universal over the carpet’s volume and did not influence the morphology, alignment or physical characteristics of the tubes. A significant increase in the tubes’ diameters due to PVA coating was measured. Thermogravimetric analysis results were compatible with a crystallinity increase of the polymer phase due to the presence of CNTs, indicating the potential of CNTs in nucleating polymer crystallinity. Potential applications of the nanocomposite are discussed.
- S. Iijima, “Helical Microtubules of Graphitic Carbon,” Nature, Vol. 354, No. 6348, 1991, pp. 56-58. doi:10.1038/354056a0
- K.-T. Lau and D. Hui, “Effectiveness of Using Carbon Nanotubes as Nano-Reinforcements for Advanced Composite Structures,” Carbon, Vol. 40, No. 9, 2002, pp. 1605-1606. doi:10.1016/S0008-6223(02)00157-4
- V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, “Chemical Oxidation of Multi Walled Carbon Nanotubes,” Carbon, Vol. 46, No. 6, 2008, pp. 833-840. doi:10.1016/j.carbon.2008.02.012
- K. P. Ryan, et al., “Carbon Nanotubes for Reinforcement of Plastics. A Case Study with Poly(Vinyl Alcohol),” Composites Science and Technology, Vol. 67, No. 7-8, 2007, pp. 1640-1649. doi:10.1016/j.compscitech.2006.07.006
- X. Zhang, et al., “Poly(Vinyl Alcohol)/SWNT Composite Film,” Nano Letters, Vol. 3, No. 9, 2003, pp. 1285-1288.doi:10.1021/nl034336t
- X. Zhang, et al., “Gel Spinning of PVA/SWNT Composite Fiber,” Polymer, Vol. 45, No. 26, 2004, pp. 8801-8807.doi:10.1016/j.polymer.2004.10.048
- B. Vigolo, et al., “Improved Structure and Properties of Single-Wall Carbon Nanotube Spun Fibers,” Applied Physics Letters, Vol. 81, 2002, pp. 1210-1212. doi:10.1063/1.1497706
- K. P. Ryan, et al., “Multiwalled Carbon Nanotube Nucleated Crystallization and Reinforcement in Poly(Vinyl Alcohol) Composites,” Synthetic Metals, Vol. 156, No. 2- 4, 2006, pp. 332-335. doi:10.1016/j.synthmet.2005.12.015
- P. Xue, et al., “Electrically Conductive Yarns Based on PVA/Carbon Nanotubes,” Composites Structures, Vol. 78, No. 2, 2007, pp. 271-277.
- A. B. Dalton, et al., “Super-Tough Carbon-Nanotube Fibres,” Nature, Vol. 423, 2003, p. 703. doi:10.1038/423703a
- O. Probst, E. M. Moore, D. E. Resasco and B. P. Grady, “Nucleation of Polyvinyl Alcohol Crystallization by Single-Walled Carbon Nanotubes,” Polymer, Vol. 45, No. 13, 2004, pp. 4437-4443. doi:10.1016/j.polymer.2004.04.031
- M. Cadek, et al., “Morphological and Mechanical Properties of Carbon-Nanotube-Reinforced Semicrystalline and Amorphous Polymer Composites,” Journal of Applied Physics Letters, Vol. 81, No. 27, 2003, p. 5123.doi:10.1063/1.1533118
- A. R. Bhattacharyya, et al., “Crystallization and Orientation Studies in Polypropylene/Single Wall Carbon Nanotube Composite,” Polymer, Vol. 44, No. 8, 2003, pp. 2373-2377. doi:10.1016/S0032-3861(03)00073-9