Objective of this study was to develope low temperature sol-gel coatings for shape memory metal (NiTi) and evaluate their biocompatibility on NiTi suture material. A series of low temperature TiO2 and TiO2-SiO2 sol-gel coatings were prepared on glass substrates. The silica content of TiO2-SiO2 coatings ranged from 0 to 30 mol%. The coatings were also prepared with polyethyleneglycol (PEG). The contact angle and photocatalytic activity measurements were used to evaluate the surface properties of the coatings. Stability of the coatings was tested in simulated body fluid (SBF). The TiO2-SiO2 90/10 film made with PEG was more hydrophilic, showed photocatalytic activity and was crack-free after the SBF test, thus it was chosen to animal experiment as a new experimental coating. Uncoated NiTi suture and the suture coated with high temperature TiO2 were used as reference materials. NiTi sutures were inserted subcutaneously on the back of rat for four weeks. In routine histological examinations all materials showed good biocompatibility with mild inflammatory cell reaction. No significant differences in the soft tissue response among the materials were observed. Both the high and new low temperature processed sol-gel coatings remained attached on the sutures confirming the suitability of the coating technique on thin NiTi sutures.
D. Pickup, K. Wetherall, J. Knowles, M. Smith and R. Newport, “Sol-Gel Preparation and High-Energy XRD Study of (CaO)x(TiO2)0.5?x(P2O5)0.5 Glasses (x = 0 and 0.25),” Journal of Materials Science: Materials in Medi-cine, Vol. 19, No. 4, April 2008, pp. 1661-1668.
P. Saravanapavan, J. R. Jones, S. Verrier, R. Beilby, V. J. Shirtliff, L. L. Hench and J. M. Polak, “ Binary CaO–SiO2 Gel-Glasses for Biomedical Applications,” Bio-Medical Materials & Engineering, Vol. 14, No. 4, December 2004,pp. 467-486.
S. Areva, H. Paldan, T. Peltola, T. N?rhi, M. Jokinen and M. Lindén, “Use of Sol-Gel-Derived Titania Coating for Direct Soft Tissue Attachment,” Journal of Biomedical Materials Research Part A, Vol. 70A, No. 2, August 2004, pp. 169-178.
C. P. A. T. Klein, P. Li, J. M. A. de Blieck-Hogervorst and K. de Groot, “Effect of Sintering Temperature on Silica Gels and their Bone Bonding Ability,” Biomate- rials, Vol. 16, No. 9, June 1995, pp. 715-719.
L. Meseguer-Olmo, M. Ros-Nicolás, V. Vicente-Ortega, M. Alcaraz-Ba?os, M. Clavel-Sainz, D. Arcos, C. V. Ragel, M. Vallet-Regí and Meseguer-Ortiz C., “A Bioac- tive Sol-Gel Glass Implant for In Vivo Gentamicin Re- lease. Experimental Model in Rabbit,” Journal of Ortho- paedic Research, Vol. 24, No. 3, March 2006, pp. 454- 460.
M. Houmard, D. Riassetto, F. Roussel, A. Bourgeois, G. Berthomé, J. C. Joud and M. Langlet, “Enhanced Persi- Stence of Natural Super-Hydrophilicity in TiO2-SiO2 Composite Thin Films Deposited via a Sol-Gel Route,” Surface Science, Vol. 602, No. 21, November 2008, pp. 3364-3374.
L. L. Hench, I. D. Xynos and J. M. Polak, “Bioactive Glasses for in Situ Tissue Regeneration,” Journal of Biomaterials Science－Polymer Edition, Vol. 15, No. 4, April 2004, pp. 543-562.
E. S. Thian, J. Huang, S. M. Best, Z. H. Barber and W. Bonfield, “Silicon-Substituted Hydroxyapatite: The Next Generation of Bioactive Coatings,” Materials Science and Engineering: C, Vol. 27, No. 2, March 2007, pp. 251- 256.
S. Areva, V. ??ritalo, S. Tuusa, M. Jokinen, M. Lindén and T. Peltola, “Sol-Gel-Derived TiO2-SiO2 Implant Coa- Tings for Direct Tissue Attachment. Part II: Evaluation of Cell Response,” Journal of Materials Science: Materials in Medicine, Vol. 18, No. 8, August 2007, pp. 1633-1642.
D. B?cking, J. Fiedler, R. E. Brenner and R. E. Hüsing. “Cultivation of Human Fibroblasts and Multipotent Mes- enchymal Stromal Cells on Mesoporous Silica and Mixed Metal Oxide Films,” Journal of Materials Science, Vol. 44, No. 24, December 2009, pp. 6786-6794.
A. Ochsenbein, F. Chai, S. Winter, M. Traisnel, J. Breme and H. F. Hildebrand. “Osteoblast Responses to Different Oxide Coatings Produced by the Sol–Gel Process on Ti- tanium Substrates,” Acta Biomaterialia, Vol. 4, No. 5, September 2008, pp. 1506-1517.
V. Muhonen, S. Kujala, A. Vuotikka, V. ??ritalo, T. Pel- tola, S. Areva, T. N?rhi and J. Tuukkanen, “Biocompatib- ility of Sol-Gel-Derived Titania-Silica Coated Intrame- dullary NiTi Nails,” Acta Biomaterialia, Vol. 5, No. 2, February 2009, pp. 785-793.
N. B. Morgan, “Medical Shape Memory Alloy Applica- tions–The Market and its Products,” Materials Science and Engineering A, Vol. 378, No. 1-2, July 2004, pp. 16- 23.
M. Es-Souni, M. Es-Souni and H. Fischer-Brandies, “On the Properties of Two Binary Niti Shape Memory Alloys. Effects of Surface Finish on the Corrosion Behaviour and in Vitro Biocompatibility,” Biomaterials, Vol. 23, No. 14, July 2002, pp. 2887-2894.
W. Jia, M. W. Beatty, R. A. Reinhardt, T. M. Petro, D. M. Cohen, C. R. Maze, E. A. Strom and M. Hoffman, “Nic- kel Release from Orthodontic Arch Wires and Cellular Immune Response to Various Nickel Concentrations,” Journal of Biomedical Materials Research Part B: Ap- plied Biomaterials, Vol. 48, No. 4, July 1999, pp. 488- 495.
C. Shih, S. Lin, Y. Chen, Y. Su, S. Lai, G. J. Wu, C. Kwok and K. Ching, “The Cytotoxicity of Corrosion Products of Nitinol Stent Wire on Cultured Smooth Mus- cle Cells,” Journal of Biomedical Materials Research Part A, Vol. 52, No. 2, November 2000, pp. 395-403.
Y. W. Gu, B. Y. Tay, C. S. Lim and M. S. Yong, “Chara- cterization of Bioactive Surface Oxidation Layer on NiTi Alloy,” Applied Surface Science, Vol. 252, No. 5, Dece- mber 2005, pp. 2038-2049.
C. Y. Li, X. J. Yang, L. Y. Zhang, M. F. Chen and Z. D. Cui, “In vivo Histological Evaluation of Bioactive NiTi Alloy after Two Years Implantation,” Materials Science and Engineering: C, Vol. 27, No. 1, January 2007, pp. 122-126.
N. Shevchenko, M.-T. Pham and M.F. Maitz, “Studies of Surface Modified NiTi Alloy,” Applied Surface Science, Vol. 235, No. 1-2, July 2004, pp. 126-131.
N. Moritz, S. Areva, J. Wolke and T. Peltola, “TF-XRD Examination of Surface-Reactive TiO2 Coatings Pro- duced by Heat Treatment and CO2 Laser Treatment,” Biomaterials, Vol. 26, No. 21, July 2005, pp. 4460-4467.
B. Yang, M. Uchida, H. Kim, X. Zhang and T. Kokubo, “Preparation of Bioactive Titanium Metal via Anodic Oxidation Treatment,” Biomaterials, Vol. 25, No. 6, March 2004, pp. 1003-1010.
T. Peltola, M. P?tsi, H. Rahiala, I. Kangasniemi and A. Yli-Urpo, “Calcium Phosphate Induction by Sol-Gel- Derived Titania Coatings on Titanium Substrates In Vi- tro,” Journal of Biomedical Materials Research Part A, Vol. 41, No. 3, September 1998, pp. 504-510.
J. Yu, X. Zhao and Q. Zhao, “Effect of Surface Structure on Photocatalytic Activity of TiO2 Thin Films Prepared by Sol-Gel Method,” Thin Solid Films, Vol. 379, No. 1-2, December 2000, pp. 7-14.
T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi and T. Ya- mamuro, “Solutions Able to Reproduce in vivo Surface- Structure Changes in Bioactive Glass-Ceramic A-W3,” Journal of Biomedical Materials Research, Vol. 24, No. 6, June 1990, pp. 721-734.
J. A. Jansen, W. J. Dhert, J. P. van der Waerden and A. F. von Recum, “Semi-Quantitative and Qualitative His- tologic Analysis Method for the Evaluation of Implant Biocompatibility,” Journal of Investigative Surgery, Vol. 7, No. 2, March-April 1994, 123-134.
H. Choi, E. Stathatos and D. D. Dionysiou, “Synthesis of Nanocrystalline Photocatalytic TiO2 Thin Films and Par- ticles Using Sol-Gel Method Modified with Nonionic Surfactants,” Thin Solid Films, Vol. 510, No. 1-2, July 2006, pp. 107-114.
M. Langlet, A. Kim, M. Audier and J. M. Herrmann, “Sol-Gel Preparation of Photocatalytic TiO2 Films on Polymer Substrates,” Journal of Sol-Gel Science and Technology, Vol. 25, No. 3, December 2002, pp. 223- 234.
A. Matsuda, Y. Matsuno, M. Tatsumisago and T. Minami, “Changes in Porosity and Amounts of Adsorbed Water in Sol-Gel Derived Porous Silica Films with Heat Treat- ment,” Journal of Sol-Gel Science and Technology, Vol. 20, No. 2, February 2001, pp. 129-134.
Y. Djaoued, S. Badilescu, P. V. Ashrit, D. Bersani, P. P. Lottici and R. Brüning, “Low Temperature Sol-Gel Preparation of Nanocrystalline TiO2 Thin Films,” Journal of Sol-Gel Science and Technology, Vol. 24, No. 3, July 2002, 247-254.
Liu Z, Jin Z, W. Li and J. Qiu, “Preparation of ZnO Porous Thin Films by Sol-Gel Method Using PEG Template,” Materials Letters, Vol. 59, No. 28, December 2005, pp. 3620-3625.
K. Kuraoka, T. Ueda, M. Sato, T, Okamoto and T. E. Yazawa. “Preparation and Properties of Organic-Inorganic Hybrid Flexible Hardcoat Films,” Journal of Materials Science, Vol. 40, No. 13, July 2005, pp. 3577-3579.
B. Guo, Z. Liu, L. Hong and H. Jiang, “Sol-Gel Derived Photocatalytic Porous TiO2 Thin Films,” Surface and Co- atings Technology, Vol. 198, No. 1-3, August 2005, pp. 24-29.
J. Yu, J. C. Yu, B. Cheng, X. Zhao, Z. Zheng and A. S. K. Li, “Atomic Force Microscopic Studies of Porous TiO2 Thin Films Prepared by the Sol-Gel Method,” Journal of Sol-Gel Science and Technology, Vol. 24, No. 3, July 2002, pp. 229-240.
X. Gao and I. E. Wachs, “Titania-Silica as Catalysts: Mo- lecular Structural Characteristics and Physicochemical Properties,” Catalysis Today, No. 51, No. 2, June 1999, pp. 233-254.
D. M. Pickup, F. E. Sowrey, R. J. Newport, P. N. Gun- awidjaja, K. O. Drake and M. E. Smith, “The Structure of TiO2-SiO2 Sol-Gel Glasses from Neutron Diffraction with Isotopic Substitution of Titanium and 17O and 49Ti Solid- state NMR with Isotopic Enrichment,” The Journal of Physical Chemistry B, Vol. 108, No. 30, July 2004, pp. 10872-10880.
V. ??ritalo, S. Areva, M. Jokinen, M. Lindén and T. Pelt- ola, “Sol-Gel-Derived TiO2-SiO2 Implant Coatings for Direct Tissue Attachment. Part I: Design, Preparation and Characterization,” Journal of Materials Science: Materi- als in Medicine, Vol. 18, No. 9, September 2007, pp. 1863-7183.
P. Sepulveda, J. R. Jones and L. L. Hench, “In Vitro Dis- solution of Melt-Derived 45S and Sol-Gel Derived 58S Bioactive Glasses,” Journal of Biomedical Materials Res- earch Part A, Vol. 61, No. 2, August 2002, pp. 301-311.
M. M. Pereira and L. L. Hench, “Mechanisms of Hydr- oxyapatite Formation on Porous Gel-Silica Substrates,” Journal of Sol-Gel Science and Technology, Vol. 7, No. 1-2, August 1996, pp. 59-68.
T. Peltola, M. Jokinen, H. Rahiala, M. P?tsi, J. Heikkil?, I. Kangasniemi and A. Yli-Urpo, “Effect of Aging Time of Sol on Structure and In Vitro Calcium Phosphate Forma- tion of Sol-Gel-Derived Titania Films,” Journal of Bio- medical Materials Research Part A, Vol. 51, No. 2, Au- gust 2000, pp. 200-208.
C. Kang, L. Jing, T. Guo, H. Cui, J. Zhou and H. Fu, “Mesoporous SiO2-Modified Nanocrystalline TiO2 with High Anatase Thermal Stability and Large Surface Area as Efficient Photocatalyst,” The Journal of Physical Chemistry C, Vol. 113, No. 3, January 2009, pp. 1006- 1013.
H. J. Lee, S. H. Hahn, E. J. Kim and Y. Z. You, “Influ- ence of Calcination Temperature on Structural and Opti- cal Properties of TiO2-SiO2 Thin Films Prepared by Sol-Gel Dip Coating,” Journal of Materials Science, No. 39, No. 11, June 2004, pp. 3683-3688.
C. Xie, Z. Xu, Q. Yang, B. Xue, Y. Du and J. Zhang, “Enhanced Photocatalytic Activity of Titania-Silica Mixed Oxide Prepared via Basic Hydrolyzation,” Materi- als Science and Engineering B, Vol. 112, No. 1, Septem- ber 2004, pp. 34-41.
H. Paldan, S. Areva, T. Tirri, T. Peltola, T. Lindholm, L. Lassila, L. Pelliniemi, R.-P. Happonen and T. N?rhi, “Soft Tissue Attachment on Sol-Gel-Treated Titanium Implants In Vivo,” Journal of Materials Science: Materials in Medicine, Vol. 19, No. 3, March 2008, pp. 1283-1290.