Research ArticleOpen AccessGoogle Scholar indexed
Effect of Microstructures and Material Compositions on Blister Formation
- 1
- 2
Materials Sciences and Applications·Volume 01 (2010)·Pages 158–161·Published 25 August 2010·DOI10.4236/msa.2010.13025
Copy link · social · email
Abstract
One of the early failures of coating is blister. Here two different coatings were applied on various materials and microstructures. The formation of the blister, and its microstructural and material dependencies were evaluated. It is concluded that general organic coating forms more severe blisters than that of the metallic effect coating. General organic coating protects the samples by insulation film while metallic coating protects by acting as galvanic protection. Therefore, the failure modes are also different, namely blister and filiform corrosion. The dependencies on the microstructures and on material types also follow the insulation film concept and galvanic protection concept.
KeywordsGeneral Organic CoatingMetallic Effect CoatingCorrosionBlister
- J. R. Davis, “Surface Engineering for Corrosion and Wear Resistance,” American Society for Materials International, Materials Park, 2001.
- K. Stevens, “Surface Engineering to Combat Wear and Corrosion: A Design Guide,” The Institute of Materials, London, 1997.
- Z. W. Wicks, “Organic Coatings: Science and Technolo-gy,” Wiley-Interscience, Haboken, 2007.
- “ASTM Standard: D3359—07,” ASTM Annual Book of Standards, ASTM Publisher, West Conshohocken, 2007.