Synthesis and Electrical Characterization of BaTiO3 Thin Films on Si(100)
- 1
- 2
- 3
Abstract
BaTiO3 thin film has been deposited on Si(100) substrate using sol-gel process and deposited by using spin – coating technique. The BaTiO3/Si(100) structures were studied by structural and electrical characteristics. The X-ray diffrac-tion of BaTiO3/Si(100) shows that the diffraction peaks become increasing sharp with increasing calcination tempera-tures indicating the enhance crystallinity of the films. Scanning electron microscopy of BaTiO3 thin films shows the crack free and uniform nature. The capacitance-voltage measurement of BaTiO3 thin film deposited on Si(100) an-nealed at 600℃ shows large frequency dispersion in the accumulation region. The current-voltage measurement of BaTiO3/Si shows the ideality factor was approaches to unity at 600℃.
- S. Witanachi, S. Patel, D. T. Shaw and H. S. Kwok, “Effect of buffer layers on low‐temperature growth of mirror‐like su-perconducting thin films on sapphire,” Applied Physics Letters, Vol. 55, No. 3, 1989, pp. 295-297.
- J. S. Lee, Y. H. Bae and Y. H. Lee, “A novel BaTiO3/SiO2-based vol-tage-programmable link applicable to on-chip programmable devices,” Semiconductor Science and Technolology, Vol. 15, No. 3, 2000, pp. 267-269
- Petraru, J. Schubert, M. Schmid and C. Buchal, “Ferroelectric BaTiO3 thin-film optical waveguide modulators,” Applied Physics Letters, Vol. 81, No. 8, 2002, pp. 1375-1377.
- T. García, P. Bartolo-Pérez, E. de Posada, J. L. Pe?a and M. Villagrán-Muniz, “Studies of pulsed laser deposition processes of BaTiO3 thin films,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 3621-3624 .
- T. T. W. Kim, Y. S. Yoon, S. S. Yom and C. O. Kim, “Ferroelectric BaTiO3 films with a high-magnitude dielectric constant grown on p-Si by low-pressure metalorganic chemical vapor deposition,” Applied Surface Science, Vol. 90, No. 1, 1995, pp. 75-80.
- X. D. Wu, A. Inam, M. S. Hegde, B. Wilkens, C. C. Chang, S. Miura, S. Matsubara, Y. Miyasaga and N. Shohata, “High critical currents in epitaxial YBa2Cu3O7?x thin films on silicon with buffer layers,” Ap-plied Physics Letters, Vol. 54,No. 8, 1989, pp. 754-756.
- D. K. Fork, F. A. Ponce, J. C. Tramontana and T. H. Geballe, “Epitaxial MgO on Si(001) for Y‐Ba‐Cu‐O thin‐film growth by pulsed laser deposition,” Applied Physics Letters, Vol. 58, No. 20, 1991, pp. 2294-2296.
- V. Agrawal and M. Liu, “Preparations of Barium cerate- based thin films using a modified pechni process,” Journal of Materials Science, Vol. 32, No. 3, 1997, pp. 619- 625
- V. Bouquet, S. M. Zanetti, C. R. Foschini, E. R. Leite, E. Longo and J. A. Varela, In: N. P. Bansal, K. V. Logan and J. P. Singh, Eds., Innovative Processing and Synthesis of Ceramic, Glasses, and Composites, Ceramic Transactions, The American Ceramic Society Inc., Wes-terville, Vol. 85, 1998, p. 333.
- S. M. ZanettiL, E. R. Eite, E. Longo and J. A. Varela, “Preparation and characterization of SrBi2Nb2O9 thin films made by polymeric precursors,” Journal of Materials Research, Vol. 13, No. 10, 1998, pp. 2932-2935.
- S. M. Zanetti, E. Longo, J. A. Varela and E. R. Leite, “Microstructure and phase evolution of SrTiO3 thin films on Si prepared by the use of polymeric precursors,” Materials Letters, Vol. 31, No. 3-6, 1997, pp. 173-178