Determination of Residual Stresses Numerically Obtained in ASTM AH36 Steel Welded by TIG Process
- 1 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
- 2 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
- 3 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
- 4 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
- 5 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
- 6 Universidade Federal de Pernambuco; Departamento de Engenharia Mecanica, Cidade Universitária, Recife-PE, Brazil
Abstract
Residual stresses have been numerically determined in welded joints. In this study, the numerical model is based on the coupling of different physical phenomena considering the thermal, mechanical and metallurgical nature of a welding process. The ABAQUS software program was used to perform the numerical simulations, based on the finite element method (FEM). The aspects related to the mathematical modeling of complex welding procedures were pondered with the FEM: variations in the physical and mechanical properties of the materials as a function of the temperature; the transience and the speed of the welding process, the material phase transformations; the different mechanisms of heat exchange with the environment (convection and radiation); all them associated with a high level of nonlinearity. The heat source used in this analytical model for heat supply was the double ellipsoid model proposed by Goldak, in which a 60 mm × 50 mm and 3 mm rectangular ASTM AH36 steel plate was used for the TIG process simulations. Throughout this work, the optimization of the welding procedures currently practiced in petrochemical and ship building industries can be applied to reduce the levels of residual stresses.
- D. Gery, H. Long and P. Maropoulos, “Effects of Welding Speed Energy Input and Heat Source Distribution on Temperature Variations in Butt Joint Welding,” Journal of Materials Processing Technology, Vol. 167, No. 2-3, 2005, pp. 393-401. doi:10.1016/j.jmatprotec.2005.06.018
- S. A. Tsirkas, P. Papanikos and T. H. Termanidis, “Numerical Simulation of the Laser Welding Process in Butt-Joint Specimens,” Journal of Materials Processing Technology, Vol. 134, No. 1, 2003, pp. 59-69. doi:10.1016/S0924-0136(02)00921-4
- V. I. Monin, J. R.Teodosio and T. Gurova, “A Portable X-ray Apparatus for Both Stress Measurements and Phase Analysis under Field Conditions,” Advances in X-ray Analysis, Vol. 43, 2000, pp. 66-71
- K. Masubuchi, “Analysis of Welded Structures: Residual Stress, Distortion and Their Consequences,” Pergamon Press, Oxford, 1980.
- H. K. D. H. Bhadeshia, “Developments in Martensitic and Bainitic Steels: Role of the Shape Deformation,” Materials Science and Engineering: A, Vol. 378, No. 1-2, 2004, pp. 34-39.
- J. A. Francis, H. K. D. H. Bhadeshia and P. J. Withers, “Welding Residual Stresses in Ferritic Power Plant Steels,” Materials Science and Technology, Vol. 23, No. 9, 2007, pp. 1009-1020. doi:10.1179/174328407X213116
- J. A. Goldak and M. Akhlaghi, “Computational Welding Mechanics,” Springer, New York, 2002.
- T. Gurova, F. Quaranta and S. Estefen, “Monitoramento do Estado de Tensoes Residuais Durante a Fabricacao de Navios,” 2008.
- X. Castello, T. Gurova and S. Estefen, “Simulacao das Tensoes Residuais de Chapas Soldadas na Construcao Naval,” 2008.
- E. Macherauch and K. H. Kloos, “Origin Measurement and Evaluation of Residual Stresses,” Residual Stress in Science and Technology, Vol. 1, 1987, pp. 3-27.
- N. Kerrouault, “Fissuration à Chaud en Soudage d'un Acier Inoxydable austénique,” Ph.D. Thesis, Université Centrale Paris, Paris, 2000.
- Y. Danis, “Etude de la Soudabilité d'un Superalliage Base Nickel Fortement Chargé en Eléments Durcissants Titane et Aluminium: L'inconel 738,” Ph.D. Thesis, Université Bordeaux 1, Bordeaux, 2008.
- Y. Danis, E. Lacoste and C. Arvieu, “Numerical Modeling of Inconel 738LC Deposition Welding: Prediction of Residual Stress Induced Cracking,” Journal of Materials Processing Technology, Vol. 210, No. 14, 2010, pp. 2053-2061. doi:10.1016/j.jmatprotec.2010.07.027