Predictions of Storage Modulus of Glass Bead-Filled Low-Density-Polyethylene Composites
- 1 College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. China
Abstract
The factors affecting storage modulus (Ec') and quantitative characterization of polymer composites filled with inorganic particles were discussed in this paper. On the basis of Eshelby’s method and Mori’s work, an equation describing the relationship between the Ec' and the filler volume fraction, particle geometry as well as interfacial morphology was proposed. The Ec' of the glass bead filled low-density-polyethylene (LDPE/GB) composites was estimated by means of this equation under experimental conditions with temperature range of –150-100?C, frequency of 1 Hz and the amplitude of 0.6 mm, and compared with other equations proposed in literature. The results showed that the predictions for this equation were close to the measured data from the LDPE/GB composites.
- R. X. Zhang, Q. Q. Ni, T. Natsuki and M. Iwamoto, "Mechanical Properties of Composites Filled with SMA Particles and Short Fibers,” Composite Structures, 2007, Vol. 79, No. 1, pp. 90-96.
- R. Karoui and E. Dufour, “Prediction of the Rheology Parameters of Ripened Semi-Hard Cheeses Using Fluorescence Spectra in the UV and Visible Ranges Recorded at a Young Stage,” International Dairy Journal, 2006, Vol. 16, No. 12, pp. 1490-1497.
- H. Miyagawa, A. K. Mohanty, R. Burgueno, L. T. Drzal and M. Misra, “Characterization and Thermophysical Properties of Unsaturated Polyester-Layered Silicate Nanocomposites,” Journal of Nanoscience and Nanotechnology, 2006, Vol. 6, No. 2, pp. 464-471.
- J. Kolarik, L. Fambri, M. Slouf and D. Konecny, “Heterogeneous Polyamide 66/Syndiotactic Polystyrene Blends: Phase Structure and Thermal and Mechanical Properties,” Journal of Applied Polymer Science, 2005, Vol. 96, No. 3, pp. 673-684.
- J. Z. Liang, C. Y. Tang, R. K. Y. Li, S. C. Tjong and K. C. Yung, “A Study of the Elastic Storage Moduli of Glass Bead Filled LDPE Composites,” Key Engineering Materials, 1998, Vol. 145-148, pp. 817-822.
- R. K. Y. Li, J. Z. Liang and S. C. Tjong, “Morphology and Dynamic Mechanical Properties of Glass Beads Filled Low Density Polyethylene Composites,” Journal of Materials Processing Technology, 1998, Vol. 79, No. 1-3, pp. 59-65.
- J. Z. Liang, R. K. Y. Li and S. C. Tjong, “Effects of Glass Bead Content and Surface Treatment on Viscoelasticity of Filled Polypropylene/Elastomer Hybrid Composites,” Polymer International, 1999, Vol. 48, No. 11, pp. 1068-1072.
- J. Z. Liang, R. K. Y. Li and S.C. Tjong, “Effects of Glass Bead Size and Content on the Viscoelasticity of Filled Polypropylene Composites,” Polymer Testing, 2000, Vol. 19, No. 2, pp. 213-220.
- J. Z. Liang, R. K. Y. Li and S. C. Tjong, “Dynamic Mechanical Analysis of Low-Density Polyethylene with Glass Beads,” Journal of Thermoplastic Composite Materials, 2000, Vol. 13, No. 1, pp. 12-20.
- J. D. Eshelby, “Elastic Inclusion and Inhomogeneities. Progress in Solid Mechanics,” Amsterdam, 1961, Vol. 2, pp. 89-140.
- T. Mori and K. Tanaka, “Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions,” Acta Metallurgica, 1973, Vol. 21, No. 5, pp. 571-574.
- M. Taya and T. W. Chou, “On Two Kinds of Ellipsoidal Inhomogeneities in an Infinite Elastic Body: An Application to a Hybrid Composite,” International Journal of Solids and Structures, 1981, Vol. 17, pp. 553-563.