Effect of High Temperature Treatment on Aqueous Corrosion of Low-Carbon Steel by Electrochemical Impedance Spectroscopy
- 1
- 2
- 3
Abstract
The corrosion behavior of 1020C carbon steel samples that had been subjected to oxidizing heat treatment at 550°C and 675°C were studied in sodium chloride electrolytes using a 3-electrode electrochemical impedance spectroscopy. Experimental data were used to evaluate the corrosion behavior of the samples while optical microscopy was employed to investigate the surface characteristics of the samples before and after aqueous corrosion. The results showed that while the sample treated at 550°C revealed an increasing corrosion rate with time, the sample treated at 675°C indicated a higher initial corrosion rate, but the rate declined gradually over the 4-day experimental period. Optical microscopy revealed significant formation of surface corrosion products on both heat treated samples, but the complex plane diagrams indicated significant capacitive behavior for the heat treated samples relative to the untreated samples.
- A. Talekar, D. Chandra, R. Chellapa, J. Daemen, N. Tamura and M. Kunz, “Oxidation Kinetics of High Strength Low Alloy Steels at Elevated Temperatures,” Corrosion Science, Vol. 50, No. 10, 2008, pp. 2804-2815. doi:10.1016/j.corsci.2008.08.008
- F. Velasco, A. Bautista and A. Gonzalez-Centeno, “High-Temperature Oxidation and Aqueous Corrosion Performance of Ferritic, Vacuum-Sintered Stainless Steels Prealloyed with Si,” Corrosion Science, Vol. 51, No. 1, 2009, pp. 21-27. doi:10.1016/j.corsci.2008.09.035
- Y. Ashida, L. G. McMillin and G. Taylor, “The Effect of Temperature Oscillation on the Passive Corrosion Properties of Alloy 22,” Electrochemistry Communications, Vol. 9, No. 5, 2007, pp. 1102-1106. doi:10.1016/j.elecom.2007.01.006
- US Department of Energy, Office of Science, “Basic Research Needs for Advanced Nuclear Energy Systems: Report of Basic Energy Sciences Workshop,” Washington DC, 2006, pp. 113-120.
- US Department of Energy, Office of Science, “Materials Under Extreme Environments: Report of Basic Energy Sciences Workshop,” Washington DC, 2007, pp. 83-89.
- M. J. Alinger, G. R. Odette and D. T. Hoelzer, “The Development and Stability of Y-Ti-O Nanoclusters in Mechanically Alloyed Fe-Cr Based Ferritic Alloys,” Journal of Nuclear Materials, Vol. 329-333, 2004, pp. 382-386. doi:10.1016/j.jnucmat.2004.04.042
- W. F. Wang and M. J. Wu, “Effect of Silicon Content and Aging Time on Density, Hardness, Toughness and Corrosion Resistance of Sintered 303LSC-Si Stainless Steels,” Materials Science and Engineering: A, Vol. 425, No. 1-2, 2006, pp. 167-171. doi:10.1016/j.msea.2006.03.050
- W. T. Tsai, Y. N. Wen, J. T. Lee, H. Y. liou and W. F. Wang, “Effect of Silicon Addition on the Microstructure and Corrosion Behavior of Sintered Stainless Steel,” Surface and Coatings Technology, Vol. 34, No. 3, 1988, pp. 209-217. doi:10.1016/0257-8972(88)90113-2
- T. K. Rout, “Electrochemical Impedance Spectroscopy Study on Multi-Layered Coated Steel Sheets,” Corrosion Science, Vol. 49, No. 2, 2007, pp. 794-817. doi:10.1016/j.corsci.2006.06.008
- X. Zhao, Y. Zuo, J. Zhao, J. Xiong and Y. Tang, “A Study on the Self-Sealing Process of Anodic Films on Aluminum by EIS,” Surface and Coatings Technology, Vol. 200, No. 24, 2006, pp. 6846-6853. doi:10.1016/j.surfcoat.2005.10.031
- A. Bautista, A. Gonzalez-Centeno, G. Blanco and S. Guzman, “Application of EIS to the Study of Corrosion Behavior of Sintered Ferritic Stainless Steels before and after High-Temperature Exposure,” Materials Characterization, Vol. 59, No. 1, 2008, pp. 32-39. doi:10.1016/j.matchar.2006.10.008