Research ArticleOpen AccessGoogle Scholar indexed
Cell Proliferation Ability of Mouse Fibroblast-Like Cells and Osteoblast-Like Cells on a Ti-6Al-4V Alloy Film Produced by Selective Laser Melting
Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan; Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan
Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
Department of Gerodontology, Aichi Gakuin University School of Dentistry, Nagoya, Japan
Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Laser Sintering Department, ASPECT Inc., Tokyo, Japan
Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Low-Formability-Materials Processing Group, Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Laser Sintering Department, ASPECT Inc., Tokyo, Japan
Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Low-Formability-Materials Processing Group, Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
- 1 Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
- 2 Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan; Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan
- 3 Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
- 4 Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
- 5 Department of Gerodontology, Aichi Gakuin University School of Dentistry, Nagoya, Japan
- 6 Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Laser Sintering Department, ASPECT Inc., Tokyo, Japan
- 7 Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Low-Formability-Materials Processing Group, Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
- 8 Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Laser Sintering Department, ASPECT Inc., Tokyo, Japan
- 9 Advanced Laser and Process Technology Research Association (ALPROT), Tokyo, Japan; Low-Formability-Materials Processing Group, Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
- 10 Department of Dental Materials Science, Aichi Gakuin University School of Dentistry, Nagoya, Japan
Materials Sciences and Applications·Volume 05 (2014)·Pages 475–483·Published 29 May 2014·DOI10.4236/msa.2014.57051
Copy link · social · email
Abstract
Successful regeneration of tissues and organs relies on the application of suitable substrates or scaffolds in scaffold-based regenerative medicine. In this study, Ti-6Al-4V alloy films (Ti alloy film) were produced using a three-dimensional printing technique called Selective Laser Melting (SLM), which is one of the metal additive manufacturing techniques. The thickness of produced Ti alloy film was approximately 250 μm. The laser-irradiated surface of Ti alloy film had a relatively smooth yet porous surface. The non-irradiated surface was also porous but also retained a lot of partially melted Ti-6Al-4V powder. Cell proliferation ability of mouse fibroblast-like cells (L929 cells) and mouse osteoblast-like cells (MC3T3-E1 cells) on both the surfaces of Ti alloy film was examined using WST assay. Both L929 and MC3T3-E1 cells underwent cell proliferation during the culture period. These results indicate that selective laser melting is suitable for producing a cell-compatible Ti-6Al-4V alloy film for biomaterials applications.
KeywordsSelective Laser Melting (SLM)Ti-6Al-4V FilmMouse Fibroblast-Like CellMouse Osteoblast-Like CellCell Compatibility
- Tabata, Y. (2004) Tissue Regeneration Based on Tissue Engineering Technology. Congenital Anomalies (Kyoto), 44, 111-124. http://dx.doi.org/10.1111/j.1741-4520.2004.00024.x
- Langer, R. and Vacanti, J.P. (1993) Tissue Engineering. Science, 260, 920-926. http://dx.doi.org/10.1126/science.8493529
- Warnke, P.H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S.T., Springer, I.N., Witfang, J.W. and Sivananthan, S. (2009) Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering. Tissue Engineering: Part C Methods, 15, 115-124. http://dx.doi.org/10.1089/ten.tec.2008.0288
- Kim, B.S., Nikolovski, J., Bonadio, J., Smiley, E. and Mooney, D.J. (1999) Engineered Smooth Muscle Tissues: Regulating Cell Phenotype with the Scaffold. Experimental Cell Research, 251, 318-328. http://dx.doi.org/10.1006/excr.1999.4595
- Ueki, K., Takazakura, D., Marukawa, K., Shimada, M., Nakagawa, K., Takatsuka, S. and Yamamoto, E. (2003) The Use of Polylactic Acid/Polyglycolic Acid Copolymer and Gelatin Sponge Complex Containing Human Recombinant Bone Morphogenetic Protein-2 Following Condylectomy in Rabbits. Journal of Cranio-Maxillofacial Surgery, 31, 107-114. http://dx.doi.org/10.1016/S1010-5182(02)00187-7
- Chen, G., Sato, T., Ohgushi, H., Ushida, T., Tateishi, T. and Tanaka, J. (2005) Culturing of Skin Fibroblasts in a Thin PLGA-Collagen Hybrid Mesh. Biomaterials, 26, 2559-2266. http://dx.doi.org/10.1016/j.biomaterials.2004.07.034
- Alvarez, K. and Nakajima, H. (2009) Metallic Scaffolds for Bone Regeneration. Materials, 2, 790-832. http://dx.doi.org/10.3390/ma2030790
- Jacobs, J.J., Skipor, A.K., Patterson, L.M., Hallab, N.J., Paprosky, W.G., Black, J. and Galante, J.O. (1998) Metal Release in Patients Who Have Had a Primary Total Hip Arthroplasty. A Prospective, Controlled, Longitudinal Study. The Journal of Bone and Joint Surgery, 80, 1447-1458.
- Bar?o, V.A.R., Mathew, M.T., Assun??o, W.G., Yuan, J.C.-C., Wimmer, M.A. and Sukotjo, C. (2012) Stability of cpTi and Ti-6Al-4V Alloy for Dental Implants as a Function of Saliva pH—An Electrochemical Study. Clinical Oral Implants Research, 23, 1055-1062. http://dx.doi.org/10.1111/j.1600-0501.2011.02265.x
- Sarmiento-Gonzalez, A., Marchante-Gayon, J.M., Tejerina-Lobo, J.M., Paz-Jimenez, J. and Sanz-Medel, A. (2008) High-Resolution ICP-MS Determination of Ti, V, Cr, Co, Ni, and Mo in Human Blood and Urine of Patients Implanted with a Hip or Knee Prosthesis. Analiticaland Bioanalitical Chemistry, 391, 2583-2589. http://dx.doi.org/10.1007/s00216-008-2188-4