Fine Scale Precipitates in Al-Mg-Zn Alloys after Various Aging Temperatures
- 1
- 2
- 3
Abstract
This article deals with investigation of fine-scale precipitation in Al-Mg-Zn alloys with compositions of Al - 2 at% Mg- x at% Zn, (x = 1.8, 2 and 4.2). The precipitates morphology was examined by scanning electron microscope (SEM) and correlated with the microhardness (HV) and differential scanning calorimetry (DSC) of the specimens. The precipitates are characterized as h’ (MgZn2) and h (MgZn<sub>2</sub>) phases of hexagonal structure of the same composition with a slight difference in lattice parameters. In addition, T-phase pf composition (Mg<sub>32</sub> (Al, Zn)<sub>49</sub>) having a cubic crystal structure. Owing to the determined activation energies of the precipitates, the kinetics associated with their nucleation and growth can be characterized. The thermal energy acquired during aging leads to the agglomeration of precipitates to or larger particle sizes.
- S. Celotto, “TEM Study of Continuous Precipitation in Mg-9 wt%Al-1 Wt%Zn Alloy,” Acta materialia, Vol. 48, No. 8, May 2000, pp. 1775-1787. doi:10.1016/S1359-6454(00)00004-5
- C. R. Brooks, “Heat Treatment, Structure and Properties of Nonferrous Alloys,” American Society Metals, Metals Park, 1984.
- L. Hadjadj, R. Amira, D. Hamana and A. Mosbah, “Characterization of Precipitation and Phase Transformations in Al-Zn-Mg Alloy by the Differential Dilatometry,” Journal of Alloys and Compounds, Vol. 462, No. 1-2, August 2008, pp. 279-283. doi:10.1016/j.jallcom.2007.08.016
- S. K. Maloney, K. Hono, I. J. Polmear and S. P. Ringer, “The Chemistry of Precipitates in an Aged Al-2.1Zn-1.7 Mg at% alloy,” Scripta Materialia, Vol. 41, No. 10, 1999, pp. 1031-1038. doi:10.1016/S1359-6462(99)00253-5
- N. Afify, A. Gaber, M. S. Mostafa and Gh. Abbady, “Influence of Si Concentration on the Precipitation in Al-1 at% Mg Alloy,” Journal of Alloys and Compound, Vol. 462, No. 1-2, August 2008, pp. 80-87. doi:10.1016/j.jallcom.2007.08.043
- T. Ma and G. Den Ouden, “Softening Behaviour of Al-Zn-Mg Alloys Due to Welding,” Materials Science and Engineering A, Vol. 266, No. 1-2, 1999, pp. 198-204. doi:10.1016/S0921-5093(99)00020-9
- M. Chemingui, M. Khitouni, K. Jozwiak, G. Mesmacque and Abd. Kolsi, “Characterization of the Mechanical Properties Changes in an Al-Zn-Mg Alloy after a Two- Step Aging Treatment at 70? and 135?C,” Material and Design, Vol. 31, No. 6, June 2010, pp. 3134-3139. doi:10.1016/j.matdes.2009.12.033
- M. Chemingui, M. khitouni, G. Mesmacque and A.W. Kolsi, “Effect of Heat Treatment on Plasticity of Al-Zn-Mg Alloy: Microstructure Evolution and Mechanical Properties,” Physics Procedia, Vol. 2, No. 3, November 2009, pp. 1167-1174. doi:10.1016/j.phpro.2009.11.079
- F. S. Bovard, “Environmentally Induced Cracking of an Al-Zn-Mg-Cu Alloy,” M. Sc. Thesis, University of Pittsburgh, Pittsburgh, 2005.
- A. Deschamps and Y. Bréchet, “Influence of Quench and Heating Rates on the Aging Response of an Al-Zn-Mg- (Zr) Alloy,” Materials Science and Engineering A, Vol. 251, No. 1-2, August 1998, pp. 200-207. doi:10.1016/S0921-5093(98)00615-7
- C. H. Gür and ?. Y?ld?z, “Non-Destructive Investigation on the Effect of Precipitation Hardening on Impact Tough- ness of 7020 Al-Zn-Mg Alloy,” Materials Science and Engineering A, Vol. 382, No. 1-2, September 2004, pp. 395-400. doi:10.1016/j.msea.2004.05.001