Numerical Simulation of the Behavior of Cracked Reinforced Concrete Members
- 1 Department of Civil and Industrial Engineering—Structural Division, University of Pisa, Pisa, Italy
- 2 Department of Civil and Industrial Engineering—Structural Division, University of Pisa, Pisa, Italy
Abstract
Refined non-linear static or dynamic analyses of reinforced concrete structures require the knowledge of the actual force-displacement or bending moment-rotation curves of each structural member, which depend on the crack widths and on the crack pattern, and after all on the slip between concrete and reinforcing steel. For this reason the definition of improved local models taking into account all these local aspects is a fundamental prerequisite for advanced assessment of r.c. structures. A numerical procedure which allows to predict the relative displacement between steel reinforcement and the surrounding concrete in a reinforced concrete element, once assigned the stress in the naked steel bar and the bond-slip law is discussed. The method provides as final outcomes the sequence of crack openings and the individual crack widths, regardless of the particular bond-slip correlation adopted. The proposed procedure is implemented referring to two relevant experimental case studies, demonstrating that it is able to predict satisfactorily actual strain fields and slips along the investigated reinforced concrete elements.
- EN1998-1 (2004) Eurocode 8: Design of Structures for Earthquake Resistance—Part 1: General Rules, Seismic Actions and Rules for Buildings. CEN, Brussels.
- Ciampi, V., Eligehausen, R. and Popov, E.P. (1982) Analytical Model for Concrete Anchorages of Reinforced Bars under Generalized Excitations. Report. No. UCB/EERC83/23, University of California, Berkeley.
- Eligehausen, R. and Bigaj-Van Vliet, A. (1999) Bond Behaviour and Models. Structural Concrete, the Textbook on Behaviour, Design and Performance. CEB-FIP Bulletins 1, 2, 3. fib, Lausanne.
- Park, R. and Paulay, T. (2001) Reinforced Concrete Structures. John Wiley & Sons, New York.
- Tastani, S.P. and Pantazopoulou, S.J. (2002) Experimental Evaluation of the Direct Tension Pullout Bond Test. Proceedings of Symposium on “Bond in Concrete—From Research to Standards”, Budapest, 20-22 November 2002, 268-276.
- Borosnyói, A. and Balázs, G.L. (2005) Models for Flexural Cracking in Concrete: The State of the Art. Structural Concrete, 6, 53-62.
- CEB-FIP (2000) Bond of Reinforcement in Concrete. Bullettin nr. 10. fib, Lausanne.
- Beconcini, M.L., Croce, P. and Formichi, P. (2008) Influence of Bond-Slip on the Behaviour of Reinforced Concrete Beam to Column Joints. Proceedings of International fib Symposium “Taylor Made Concrete Structures: New Solutions for our Society”, Amsterdam, 19-21 May 2008, 533-539.
- Formichi, P. (2010) Bond-Slip Laws and Confinement Conditions for Reinforcing Bars in r.c. Elements (in Italian). University of Pisa, Pisa.
- Casanova, A., Jason, L. and Davenne, L. (2012) Bond Slip Model for the Simulation of Reinforced Concrete Structures. Engineering Structures, 39, 66-78. http://dx.doi.org/10.1016/j.engstruct.2012.02.007
- Bresler, B. and Bertero, V. (1968) Behavior of Reinforced Concrete under Repeated Load. Journal of the Structural Division ASCE, 94, 1567-1590.
- CEB-FIP (1993) Bullettin d’information 213/214 CEB-FIP Model Code 1990. Thomas Telford, London.
- Fédération Internationale du Béton (fib) (2012) Bulletin n. 65/66 Model Code 2010. Final draft, Volume 1, 2. fib, Lausanne.
- Mains, R.M. (1951) Measurements of the Distribution of Tensile Bond Stresses along Reinforcing Bars. Journal of the American Concrete Institute, Proceedings, 48, 225-252.