Kinetics of Indium Extraction from Mechanically Activated ITO Scrap
- 1
- 2
- 3
- 4
- 5
Abstract
The indium tin oxide scrap (ITOS) was mechanically activated by a stirring ball mill and subsequently studied for the leaching behavior and kinetics of extracting indium from ITOS in hydrochloric acid solution. The X-ray diffraction (XRD) analysis showed that MA caused the decrease in crystalline phase and increase in lattice distortion. The effects of reaction temperature and hydrochloric acid concentration on the leaching rate of indium were also investigated, which showed that the indium extraction from ITOS had significant dependency on temperature and HCl concentration. The equal-recovery method was used for kinetics analysis. When ITOS was mechanically activated for 15 and 30 min, the apparent activation energy decreased from 90.6 kJ/mol to 70.3 and 53.0 kJ/mol, respectively, which indicated that MA could enhance the reactivity of ITOS and accelerated the reaction. The reaction orders of extracting indium from the nonactivated, milled for 15 and 30 min ITOS with respect to HCl concentration were 2.30, 1.44, and 1.31, respectively.
- A. M. Alfantazi and R. R. Moskalyk, “Processing of indium: a review”, Minerals Engineering, Vol. 16, No. 8, August 2003, pp. 687-694.
- X. Tong, S. X. Song, J. He and A. Lopez-Valdivieso, “Flotation of indium-beard marmatite from multi-metallic ore”, Rare Metals, Vol. 27, No. 2, April 2008, pp. 107- 111.
- S. Calnan, H. M. Upadhyaya, M. J. Thwaites and A. N. Tiwari, “Properties of indium tin oxide films deposited using High Target Utilisation Sputtering”, Thin Solid Films, Vol. 515, No. 15, May 2007, pp. 6045-6050.
- A. B. Chebotareva, G. G. Untila, T. N. Kost, S. Jorgensen and A. G. Ulyashinc, “ITO deposited by pyrosol for photovoltaic applications”, Thin Solid Films, Vol. 515, No. 24, October 2007, pp. 8505-8510.
- J. Liu, D. Wu, N. Zhang and Y. Wang, “Effect of surfactants on the structure and photoelectric properties of ITO films by sol-gel method”, Rare Metals, Vol. 29, No. 2, April 2010, pp. 143-148.
- W. S. Jung, S. G. Yoon, S. M. Kang, S. Kim and D. H. Yoon, “Electrical and optical properties of ITO:Ca composite thin films for TEOLED cathode”, Thin Solid Films, Vol. 516, No. 16, June 2008, pp. 5445-5448.
- S. Hsieh, C. Chen and W. C. Say, “Process for recovery of indium from ITO scraps and metallurgic microstructures”, Materials Science and Engineering B, Vol. 158, No. 1-3, February 2009, pp. 82-87.
- C. Sasikumar, D. S. Rao, S. Srikanth, B. Ravikumar, N. K. Mukhopadhyay and S. P. Mehrotra, “Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India”, Hydrometallurgy, Vol. 75, No. 1-4, November 2004, pp. 189-204.
- M. Achimovi?ová and P. Balá?, “Influence of mechanical activation on selectivity of acid leaching of arsenopyrite”, Hydrometallurgy, Vol. 77, No. 1-2, April 2005, pp. 3-7.
- E. Godo?íková, P. Balá? and E. Boldi?árová, “Structural and temperature sensitivity of the chloride leaching of copper, lead and zinc from a mechanically activated complex sulphide”, Hydrometallurgy, Vol. 65, No. 1, July 2002, pp. 83-93.
- A. M. Amer, “Investigation of the direct hydrometallurgical processing of mechanically activated low-grade wolframite concentrate”, Hydrometallurgy, Vol. 58, No. 3, December 2000, pp. 251-259.
- P. Balá?, “Mechanical activation in hydrometallurgy”, International Journal of Mineral Processing, Vol. 72, No. 1-4, September 2003, pp. 341-354.