Consolidation of MA W-Ni-Fe Alloyed Powder by Microwave-Assisted Sintering
- 1
- 2
- 3
Abstract
MA W-Ni-Fe alloyed powder compact was sintered by microwave technology, and the influence of microwave sintering on consolidation of W-Ni-Fe alloy was studied. The fracture morphology and microstructure of alloys were measured by SEM and metallurgical microscope. The experimental results showed that microwave sintering promoted the densification of MA W-Ni-Fe alloyed powder quickly with the higher heating rate. The density of the sintered samples increased with the increase of sintering temperature, and significant densification shrinkage occured at 1300 ~ 1400°C. The tungsten grain grew rapidly at 1450°C. When the alloy was microwave sintered at 1550°C, the inner structure of alloy is more homogeneous, the average W grain size is about 15 μm, and the relative density of sintered specimen is 99%.
- J. S. C. Jang, J. C. Fwu, L. J. Chang, G. J. Chen and C. T. Hsu, “Study on the solid-phase sintering of the nano- structured heavy tungsten alloy powder,” Journal of Alloys and Compounds, Vol. 434-435, 31 May 2007, pp. 367-370.
- Farid Akhtar, “An investigation on the solid state sintering of mechanically alloyed nano-structured 90W-Ni-Fe tungsten heavy alloy,” International Journal of Refractory Metals and Hard Materials, Vol. 26, No. 3, May 2008, PP. 145-151.
- Soon H. Hong and Ho J. Ryu, “Combination of mechanical alloying and two-stage sintering of a 93W-5.6Ni- 1.4Fe tungsten heavy alloy.” Materials Science and Engineering A, Vol. 344, No. 1-2, 15 March 2003, PP. 253- 260.
- Kyong H. Lee, Seung I. Cha, Ho J. Ryu and Soon H. Hong, “Effect of two-stage sintering process on microstructure and mechanical properties of ODS tungsten heavy alloy”, Materials Science and Engineering: A, Vol. 458, No. 1-2, 15 June 2007, PP. 323-329.
- Xiao-qiang LI, Hong-wei XIN, Ke HU and Yuan-yuan LI, “Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering,” Transactions of Nonferrous Metals Society of China, Vol. 20, No.3, March 2010, PP. 443-449.
- S Das, A K Mukhopadhyay, S Datta and D Basu, “Prospects of microwave processing: An overview,” Bulletin of Materials Science, Vol. 32, No. 1, February 2009, PP. 1-13.
- Anish Upadhyayaa and Guneet Sethi, “Effect of heating mode on the densification and microstructural homogenization response of premixed bronze,” Scripta Materialia, Vol. 56, No. 6, March 2007, PP. 469-472.
- A. Upadhyaya, S.K. Tiwari and P. Mishra, “Microwave sintering of W-Ni-Fe alloy,” Scripta Materialia, Vol. 56, No.1, January 2007, PP. 5-8.
- Mehdi Mazaheri, A. M. Zahedi and M. M. Hejazi, “Processing of nanocrystalline 8 mol% yttria-stabilized zirconia by conventional, microwave-assisted and two-step sintering,” Materials Science and Engineering A, Vol. 492, No. 1-2, September 2008, PP. 261-267.
- S. S. Panda, V. Singh, A. Upadhyaya and D. Agrawal, “Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces,” Scripta Materialia, Vol. 54, No. 12, June 2006, PP. 2179–2183
- R Roy, D Agrawal, J Cheng and S Gedevanishvili, “Full sintering of powder metal bodies in a microwave field,” Nature, Vol. 399, No, 6737, June 1999, PP. 668-670.