Optical Microscopy as a Tool to Correlate Morphology and Thermal Properties of Extruded PET/PC Reactive Blends
- 1 Instituto de Macromoléculas Professora Eloisa Mano-IMA, Universidade Federal do, Rio de Janeiro-UFRJ, Centro de Tecnologia, Bloco J, P.O.Box 68525, Avenida Horácio, Macedo, 2030 -21941-598, Rio de Janeiro, RJ, Brasil
- 2
Abstract
Catalysed and uncatalysed reactive extruded poly(ethylene terephthalate)/poly(bisphenol-A carbonate) (PET/PC) blends phase structure at compositional range containing 0-100 wt% of both parent polymers were evaluated. Phase separation was supported by TG/DTG, DMA and DSC. The changes on T<sub>g</sub> and T<sub>m</sub> of the parent polymers were associated to the esterification and transesterification reactions inside the phases and into the interfacial region. According to optical observations, not yet published in this matter, the blend morphology was dictated, either composition or melt flow rate and in the whole composition range, a matrix-droplet morphology was noticed. PET was only able to be crystallized in blends in which it was the matrix. Mostly, the PET/PC blends revealed to be partially miscible systems in which the level of the transesterification/esterification reactions was driven by the kind of matrix. The latter showed great influence on the thermal properties.
- L. A. Utracki, “Compatibilization of Polymer Blends,” Canadian Journal of Chemical Engineering, Vol. 80, No. 6, 2002, pp. 1008-1016. doi:10.1002/cjce.5450800601
- A. Al-Jabareen, S. Illescas, M. L. I. Maspoch and O. O. Santana, “Effects of Composition and Transesterification Catalysts on the Physico-chemical and Dynamic Properties of PC/PET Blends Rich in PC,” Journal of the Materials Science, Vol. 45, No. 24, 2010, pp. 6623-6633. doi:10.1007/s10853-010-4753-4
- Y. Kong and J. N. Hay, “Miscibility and Crystallization Behavior of Poly(Ethyelene Terephthatale)/Polycarbonate Blends,” Polymer, Vol. 43, No. 6, March 2002, pp. 1805- 1811. doi:10.1016/S0032-3861(01)00772-8
- Z, Zhang, Y. Xie and D. Ma, “Relationship between Miscibility and Chemical Strucutures in Reactive Blending of Poly(Bisphenol A Carbonate) and Poly(Ethylene Tere- phthalate,” European Polymer Journal, Vol. 37, No. 10, October 2001, pp. 1961-1966. doi:10.1016/S0014-3057(01)00089-1
- P. Marchese, A. Celi, M. Fiorini and M. Gabaldi, “Effects of Annealing on Crystallinity and Phase Behavior of PET/PC Block Copolymers,” European Polymer Journal, Vol. 39, No. 6, June 2003, pp. 1081-1089. doi:10.1016/S0014-3057(02)00377-4
- C. Carrot, S. Mbarek, M. Jaziri, Y. Chalamet, C. Raveyre and F. Prochazka, “Immiscible Blends of PC and PET, Current Knowledge and New Results: Rheological Properties,” Macromolecular Materials Engineering, Vol. 292, No. 6, 2007, pp. 693-706. doi:10.1002/mame.200700006
- C. Carrot, S. Mbarek and M. Jaziri, “Recycling Poly(Ethyelene Terephthalate) Wastes: Properties of Poly(Ethylene Terephyhalate)/Polycarbonate Blends and the Effect of a Transesterification Catalyst,” Polymer Engineering & Science, Vol. 46, No. 10, 2006, pp. 1378- 1386. doi:10.1002/pen.20625
- P. Marchese, A. Celi and M. Fiorini, “Influence of Activity of Transesterification Catalysts on the Phase Behavior of PC-PET Blends,” Macromolecular Chemistry and Physics, Vol. 203, No. 4, 2002, pp. 695-704. doi:10.1002/1521-3935(20020301)203:4 3.0.CO;2-C
- L. C. Mendes, A. M. Giornes, A. F. Cordeiro, M. R. Benzi and M. L. Dias, “Miscibility of PET/PC Blends Induced by Cobalt Complexes,” International Journal of Polymeric Materials, Vol. 56, No. 3, March 2007, pp. 257-272. doi:10.1080/00914030600812491
- P. S. C. Pereira, L. C. Mendes, L. Sirelli and M. L. Dias, “Influence of Cobalt Complex on Thermal Properties of Poly(Ethylene Terephthalate)/Polycarbonate Blend,” Jou- rnal of Thermal Analysis and Calorimetry, Vol. 87, No. 3, March 2007, pp. 667-671. doi:10.1007/s10973-006-7873-y